Hi,
Please find the latest report on new defect(s) introduced to coreboot found with Coverity Scan.
58 new defect(s) introduced to coreboot found with Coverity Scan.
New defect(s) Reported-by: Coverity Scan Showing 20 of 58 defect(s)
** CID 1433626: Insecure data handling (TAINTED_SCALAR) /src/lib/cbfs.c: 328 in cbfs_prog_stage_load()
________________________________________________________________________________________________________ *** CID 1433626: Insecure data handling (TAINTED_SCALAR) /src/lib/cbfs.c: 328 in cbfs_prog_stage_load() 322 fsize = cbfs_stage_load_and_decompress(fh, foffset, fsize, load, 323 stage.memlen, stage.compression); 324 if (!fsize) 325 return -1; 326 327 /* Clear area not covered by file. */
CID 1433626: Insecure data handling (TAINTED_SCALAR) Passing tainted variable "stage.memlen - fsize" to a tainted sink. [Note: The source code implementation of the function has been overridden by a builtin model.]
328 memset(&load[fsize], 0, stage.memlen - fsize); 329 330 prog_segment_loaded((uintptr_t)load, stage.memlen, SEG_FINAL); 331 332 out: 333 prog_set_area(pstage, load, stage.memlen);
** CID 1432270: Parse warnings (PARSE_ERROR) /3rdparty/arm-trusted-firmware/include/lib/libc/stdint.h: 93 in ()
________________________________________________________________________________________________________ *** CID 1432270: Parse warnings (PARSE_ERROR) /3rdparty/arm-trusted-firmware/include/lib/libc/stdint.h: 93 in () 87 #define INTMAX_C(x) x ## LL 88 #define UINTMAX_C(x) x ## ULL 89 90 typedef signed char int8_t; 91 typedef short int16_t; 92 typedef int int32_t;
CID 1432270: Parse warnings (PARSE_ERROR) invalid redeclaration of type name "int64_t" (declared at line 1413 of "/home/coreboot/node-root/workspace/coreboot-coverity/cov-int/emit/9bbe52bbb28b/config/29ec7ea376092a30b16589a913b3478c/gcc-config-0/coverity-compiler-compat.h")
93 typedef long long int64_t; 94 95 typedef unsigned char uint8_t; 96 typedef unsigned short uint16_t; 97 typedef unsigned int uint32_t; 98 typedef unsigned long long uint64_t;
** CID 1429983: Control flow issues (DEADCODE) /src/drivers/uart/acpi/acpi.c: 104 in uart_acpi_fill_ssdt()
________________________________________________________________________________________________________ *** CID 1429983: Control flow issues (DEADCODE) /src/drivers/uart/acpi/acpi.c: 104 in uart_acpi_fill_ssdt() 98 reset_gpio_index >= 0 || enable_gpio_index >= 0) { 99 struct acpi_dp *dsd = acpi_dp_new_table("_DSD"); 100 if (config->compat_string) 101 acpi_dp_add_string(dsd, "compatible", 102 config->compat_string); 103 if (irq_gpio_index >= 0)
CID 1429983: Control flow issues (DEADCODE) Execution cannot reach this statement: "acpi_dp_add_gpio(dsd, "irq-...".
104 acpi_dp_add_gpio(dsd, "irq-gpios", path, 105 irq_gpio_index, 0, 106 config->irq_gpio.active_low); 107 if (reset_gpio_index >= 0) 108 acpi_dp_add_gpio(dsd, "reset-gpios", path, 109 reset_gpio_index, 0,
** CID 1429781: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /src/cpu/x86/mtrr/earlymtrr.c: 108 in var_mtrr_set_with_cb()
________________________________________________________________________________________________________ *** CID 1429781: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /src/cpu/x86/mtrr/earlymtrr.c: 108 in var_mtrr_set_with_cb() 102 min base bit set and maximum size bit set. */ 103 if (addr_lsb > size_msb) 104 mtrr_size = 1 << size_msb; 105 else 106 mtrr_size = 1 << addr_lsb; 107
CID 1429781: Integer handling issues (CONSTANT_EXPRESSION_RESULT) "(uint64_t)addr >> 32" is 0 regardless of the values of its operands. This occurs as the operand of assignment.
108 base.hi = (uint64_t)addr >> 32; 109 base.lo = addr | type; 110 mask.hi = ctx->upper_mask; 111 mask.lo = ~(mtrr_size - 1) | MTRR_PHYS_MASK_VALID; 112 callback(ctx, addr, mtrr_size, base, mask); 113 ctx->used_var_mtrrs++;
** CID 1429778: Integer handling issues (BAD_SHIFT) /src/cpu/x86/mtrr/earlymtrr.c: 108 in var_mtrr_set_with_cb()
________________________________________________________________________________________________________ *** CID 1429778: Integer handling issues (BAD_SHIFT) /src/cpu/x86/mtrr/earlymtrr.c: 108 in var_mtrr_set_with_cb() 102 min base bit set and maximum size bit set. */ 103 if (addr_lsb > size_msb) 104 mtrr_size = 1 << size_msb; 105 else 106 mtrr_size = 1 << addr_lsb; 107
CID 1429778: Integer handling issues (BAD_SHIFT) In expression "(uint64_t)addr >> 32", right shifting "addr" by more than 31 bits always yields zero. The shift amount is 32.
108 base.hi = (uint64_t)addr >> 32; 109 base.lo = addr | type; 110 mask.hi = ctx->upper_mask; 111 mask.lo = ~(mtrr_size - 1) | MTRR_PHYS_MASK_VALID; 112 callback(ctx, addr, mtrr_size, base, mask); 113 ctx->used_var_mtrrs++;
** CID 1429774: Memory - corruptions (OVERRUN) /src/soc/intel/cannonlake/fsp_params.c: 356 in platform_fsp_silicon_init_params_cb()
________________________________________________________________________________________________________ *** CID 1429774: Memory - corruptions (OVERRUN) /src/soc/intel/cannonlake/fsp_params.c: 356 in platform_fsp_silicon_init_params_cb() 350 } 351 memcpy(params->PcieClkSrcUsage, config->PcieClkSrcUsage, 352 sizeof(config->PcieClkSrcUsage)); 353 memcpy(params->PcieClkSrcClkReq, config->PcieClkSrcClkReq, 354 sizeof(config->PcieClkSrcClkReq)); 355
CID 1429774: Memory - corruptions (OVERRUN) Overrunning array "config->PcieRpAdvancedErrorReporting" of 16 bytes by passing it to a function which accesses it at byte offset 23 using argument "24UL". [Note: The source code implementation of the function has been overridden by a builtin model.]
356 memcpy(params->PcieRpAdvancedErrorReporting, 357 config->PcieRpAdvancedErrorReporting, 358 sizeof(params->PcieRpAdvancedErrorReporting)); 359 360 memcpy(params->PcieRpLtrEnable, config->PcieRpLtrEnable, 361 sizeof(config->PcieRpLtrEnable));
** CID 1429771: Memory - illegal accesses (OVERRUN) /src/acpi/soundwire.c: 419 in soundwire_gen_codec()
________________________________________________________________________________________________________ *** CID 1429771: Memory - illegal accesses (OVERRUN) /src/acpi/soundwire.c: 419 in soundwire_gen_codec() 413 if (dp_prop_cb) 414 dp_prop_cb(dpn, entry->port, codec); 415 acpi_dp_add_child(dsd, name->sdw_name, dpn); 416 } 417 if (entry->sink) { 418 name = &dpn_sink_names[entry->port];
CID 1429771: Memory - illegal accesses (OVERRUN) Overrunning array of 112 bytes at byte offset 112 by dereferencing pointer "name".
419 dpn = acpi_dp_new_table(name->acpi_name); 420 soundwire_gen_dpn(dpn, entry->sink); 421 422 /* Callback for custom properties from the codec. */ 423 if (dp_prop_cb) 424 dp_prop_cb(dpn, entry->port, codec); 425 acpi_dp_add_child(dsd, name->sdw_name, dpn); 426 } 427 }
** CID 1429766: Memory - illegal accesses (OVERRUN) /src/acpi/soundwire.c: 409 in soundwire_gen_codec()
________________________________________________________________________________________________________ *** CID 1429766: Memory - illegal accesses (OVERRUN) /src/acpi/soundwire.c: 409 in soundwire_gen_codec() 403 /* Stop processing at the first invalid data port. */ 404 if (entry->port < SOUNDWIRE_MIN_DPN || entry->port > SOUNDWIRE_MAX_DPN) 405 break; 406 407 if (entry->source) { 408 name = &dpn_source_names[entry->port];
CID 1429766: Memory - illegal accesses (OVERRUN) Overrunning array of 112 bytes at byte offset 112 by dereferencing pointer "name".
409 dpn = acpi_dp_new_table(name->acpi_name); 410 soundwire_gen_dpn(dpn, entry->source); 411 412 /* Callback for custom properties from the codec. */ 413 if (dp_prop_cb) 414 dp_prop_cb(dpn, entry->port, codec);
** CID 1429762: Memory - corruptions (OVERRUN) /src/soc/intel/cannonlake/fsp_params.c: 364 in platform_fsp_silicon_init_params_cb()
________________________________________________________________________________________________________ *** CID 1429762: Memory - corruptions (OVERRUN) /src/soc/intel/cannonlake/fsp_params.c: 364 in platform_fsp_silicon_init_params_cb() 358 sizeof(params->PcieRpAdvancedErrorReporting)); 359 360 memcpy(params->PcieRpLtrEnable, config->PcieRpLtrEnable, 361 sizeof(config->PcieRpLtrEnable)); 362 memcpy(params->PcieRpSlotImplemented, config->PcieRpSlotImplemented, 363 sizeof(config->PcieRpSlotImplemented));
CID 1429762: Memory - corruptions (OVERRUN) Overrunning array "config->PcieRpHotPlug" of 16 bytes by passing it to a function which accesses it at byte offset 23 using argument "24UL". [Note: The source code implementation of the function has been overridden by a builtin model.]
364 memcpy(params->PcieRpHotPlug, config->PcieRpHotPlug, 365 sizeof(params->PcieRpHotPlug)); 366 367 for (i = 0; i < CONFIG_MAX_ROOT_PORTS; i++) { 368 params->PcieRpMaxPayload[i] = config->PcieRpMaxPayload[i]; 369 if (config->PcieRpAspm[i])
** CID 1407752: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/port80.c: 118 in port80_dump_buffer()
________________________________________________________________________________________________________ *** CID 1407752: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/port80.c: 118 in port80_dump_buffer() 112 last_e = e; 113 } 114 } 115 ccputs(" <--new\n"); 116 117 /* Displaying last port80 msg on 7-segment if it is enabled */
CID 1407752: Integer handling issues (CONSTANT_EXPRESSION_RESULT) "({...; 0;}) && last_e" is always false regardless of the values of its operands. This occurs as the logical operand of "if".
118 if (IS_ENABLED(CONFIG_SEVEN_SEG_DISPLAY) && last_e) 119 display_7seg_write(SEVEN_SEG_PORT80_DISPLAY, last_e); 120 } 121 122 /*****************************************************************************/ 123 /* Console commands */
** CID 1407749: (DEADCODE) /3rdparty/chromeec/common/motion_sense.c: 904 in motion_sense_task() /3rdparty/chromeec/common/motion_sense.c: 844 in motion_sense_task()
________________________________________________________________________________________________________ *** CID 1407749: (DEADCODE) /3rdparty/chromeec/common/motion_sense.c: 904 in motion_sense_task() 898 /* 899 * Ask the host to flush the queue if 900 * - a flush event has been queued. 901 * - the queue is almost full, 902 * - we haven't done it for a while. 903 */
CID 1407749: (DEADCODE) Execution cannot reach the expression "motion_sense_fifo_is_wake_up_needed()" inside this statement: "if (({
int __undefined = ...". 904 if (IS_ENABLED(CONFIG_ACCEL_FIFO) && 905 (motion_sense_fifo_is_wake_up_needed() || 906 event & (TASK_EVENT_MOTION_ODR_CHANGE | 907 TASK_EVENT_MOTION_FLUSH_PENDING) || 908 (ap_event_interval > 0 && 909 time_after(ts_begin_task.le.lo, /3rdparty/chromeec/common/motion_sense.c: 844 in motion_sense_task() 838 839 lpc_status = host_get_memmap(EC_MEMMAP_ACC_STATUS); 840 set_present(lpc_status); 841 #endif 842 843 if (IS_ENABLED(CONFIG_ACCEL_FIFO))
CID 1407749: (DEADCODE) Execution cannot reach this statement: "ts_last_int = get_time();".
844 ts_last_int = get_time(); 845 846 while (1) { 847 ts_begin_task = get_time(); 848 ready_status = 0; 849 for (i = 0; i < motion_sensor_count; ++i) {
** CID 1407745: Control flow issues (DEADCODE) /3rdparty/chromeec/common/main.c: 48 in main()
________________________________________________________________________________________________________ *** CID 1407745: Control flow issues (DEADCODE) /3rdparty/chromeec/common/main.c: 48 in main() 42 if (IS_ENABLED(CONFIG_PRESERVE_LOGS)) { 43 /* 44 * Initialize tx buffer head and tail. This needs to be done 45 * before any updates of uart tx input because we need to 46 * verify if the values remain the same after every EC reset. 47 */
CID 1407745: Control flow issues (DEADCODE) Execution cannot reach this statement: "uart_init_buffer();".
48 uart_init_buffer(); 49 50 /* 51 * Initialize reset logs. Needs to be done before any updates of 52 * reset logs because we need to verify if the values remain 53 * the same after every EC reset.
** CID 1407744: Control flow issues (DEADCODE) /3rdparty/chromeec/common/uart_buffering.c: 177 in uart_process_output()
________________________________________________________________________________________________________ *** CID 1407744: Control flow issues (DEADCODE) /3rdparty/chromeec/common/uart_buffering.c: 177 in uart_process_output() 171 /* Copy output from buffer until TX fifo full or output buffer empty */ 172 while (uart_tx_ready() && (tx_buf_head != tx_buf_tail)) { 173 uart_write_char(tx_buf[tx_buf_tail]); 174 tx_buf_tail = TX_BUF_NEXT(tx_buf_tail); 175 176 if (IS_ENABLED(CONFIG_PRESERVE_LOGS))
CID 1407744: Control flow issues (DEADCODE) Execution cannot reach this statement: "tx_checksum = uart_buffer_c...".
177 tx_checksum = uart_buffer_calc_checksum(); 178 } 179 180 /* If output buffer is empty, disable transmit interrupt */ 181 if (tx_buf_tail == tx_buf_head) 182 uart_tx_stop();
** CID 1407743: (DEADCODE) /3rdparty/chromeec/common/i2c_master.c: 88 in chip_i2c_xfer_with_notify() /3rdparty/chromeec/common/i2c_master.c: 94 in chip_i2c_xfer_with_notify() /3rdparty/chromeec/common/i2c_master.c: 97 in chip_i2c_xfer_with_notify() /3rdparty/chromeec/common/i2c_master.c: 85 in chip_i2c_xfer_with_notify()
________________________________________________________________________________________________________ *** CID 1407743: (DEADCODE) /3rdparty/chromeec/common/i2c_master.c: 88 in chip_i2c_xfer_with_notify() 82 int ret; 83 84 if (IS_ENABLED(CONFIG_I2C_DEBUG)) 85 i2c_trace_notify(port, slave_addr_flags, 0, out, out_size); 86 87 if (IS_ENABLED(CONFIG_I2C_XFER_BOARD_CALLBACK))
CID 1407743: (DEADCODE) Execution cannot reach this statement: "i2c_start_xfer_notify(port,...".
88 i2c_start_xfer_notify(port, slave_addr_flags); 89 90 ret = chip_i2c_xfer(port, slave_addr_flags, 91 out, out_size, in, in_size, flags); 92 93 if (IS_ENABLED(CONFIG_I2C_XFER_BOARD_CALLBACK)) /3rdparty/chromeec/common/i2c_master.c: 94 in chip_i2c_xfer_with_notify() 88 i2c_start_xfer_notify(port, slave_addr_flags); 89 90 ret = chip_i2c_xfer(port, slave_addr_flags, 91 out, out_size, in, in_size, flags); 92 93 if (IS_ENABLED(CONFIG_I2C_XFER_BOARD_CALLBACK))
CID 1407743: (DEADCODE) Execution cannot reach this statement: "i2c_end_xfer_notify(port, s...".
94 i2c_end_xfer_notify(port, slave_addr_flags); 95 96 if (IS_ENABLED(CONFIG_I2C_DEBUG)) 97 i2c_trace_notify(port, slave_addr_flags, 1, in, in_size); 98 99 return ret; /3rdparty/chromeec/common/i2c_master.c: 97 in chip_i2c_xfer_with_notify() 91 out, out_size, in, in_size, flags); 92 93 if (IS_ENABLED(CONFIG_I2C_XFER_BOARD_CALLBACK)) 94 i2c_end_xfer_notify(port, slave_addr_flags); 95 96 if (IS_ENABLED(CONFIG_I2C_DEBUG))
CID 1407743: (DEADCODE) Execution cannot reach this statement: "i2c_trace_notify(port, slav...".
97 i2c_trace_notify(port, slave_addr_flags, 1, in, in_size); 98 99 return ret; 100 } 101 102 #ifdef CONFIG_I2C_XFER_LARGE_READ /3rdparty/chromeec/common/i2c_master.c: 85 in chip_i2c_xfer_with_notify() 79 const uint8_t *out, int out_size, 80 uint8_t *in, int in_size, int flags) 81 { 82 int ret; 83 84 if (IS_ENABLED(CONFIG_I2C_DEBUG))
CID 1407743: (DEADCODE) Execution cannot reach this statement: "i2c_trace_notify(port, slav...".
85 i2c_trace_notify(port, slave_addr_flags, 0, out, out_size); 86 87 if (IS_ENABLED(CONFIG_I2C_XFER_BOARD_CALLBACK)) 88 i2c_start_xfer_notify(port, slave_addr_flags); 89 90 ret = chip_i2c_xfer(port, slave_addr_flags,
** CID 1407741: (DEADCODE) /3rdparty/chromeec/common/usb_common.c: 139 in pd_find_pdo_index() /3rdparty/chromeec/common/usb_common.c: 136 in pd_find_pdo_index()
________________________________________________________________________________________________________ *** CID 1407741: (DEADCODE) /3rdparty/chromeec/common/usb_common.c: 139 in pd_find_pdo_index() 133 134 /* Apply special rules in case of 'tie' */ 135 if (IS_ENABLED(PD_PREFER_LOW_VOLTAGE)) { 136 if (uw == cur_uw && mv < cur_mv) 137 prefer_cur = 1; 138 } else if (IS_ENABLED(PD_PREFER_HIGH_VOLTAGE)) {
CID 1407741: (DEADCODE) Execution cannot reach this statement: "if (uw == cur_uw && mv > cu...".
139 if (uw == cur_uw && mv > cur_mv) 140 prefer_cur = 1; 141 } 142 143 /* Prefer higher power, except for tiebreaker */ 144 if (uw > cur_uw || prefer_cur) { /3rdparty/chromeec/common/usb_common.c: 136 in pd_find_pdo_index() 130 continue; 131 uw = MIN(uw, PD_MAX_POWER_MW * 1000); 132 prefer_cur = 0; 133 134 /* Apply special rules in case of 'tie' */ 135 if (IS_ENABLED(PD_PREFER_LOW_VOLTAGE)) {
CID 1407741: (DEADCODE) Execution cannot reach this statement: "if (uw == cur_uw && mv < cu...".
136 if (uw == cur_uw && mv < cur_mv) 137 prefer_cur = 1; 138 } else if (IS_ENABLED(PD_PREFER_HIGH_VOLTAGE)) { 139 if (uw == cur_uw && mv > cur_mv) 140 prefer_cur = 1; 141 }
** CID 1407738: Parse warnings (PARSE_ERROR) /3rdparty/chromeec/common/timer.c: 21 in ()
________________________________________________________________________________________________________ *** CID 1407738: Parse warnings (PARSE_ERROR) /3rdparty/chromeec/common/timer.c: 21 in () 15 #include "timer.h" 16 #include "watchdog.h" 17 18 #define TIMER_SYSJUMP_TAG 0x4d54 /* "TM" */ 19 20 /* High 32-bits of the 64-bit timestamp counter. */
CID 1407738: Parse warnings (PARSE_ERROR) function call is not allowed in a constant expression
21 STATIC_IF_NOT(CONFIG_HWTIMER_64BIT) uint32_t clksrc_high; 22 23 /* Bitmap of currently running timers */ 24 static uint32_t timer_running; 25 26 /* Deadlines of all timers */
** CID 1407736: Parse warnings (PARSE_ERROR) /3rdparty/chromeec/driver/accelgyro_bmi160.c: 30 in ()
________________________________________________________________________________________________________ *** CID 1407736: Parse warnings (PARSE_ERROR) /3rdparty/chromeec/driver/accelgyro_bmi160.c: 30 in () 24 #include "util.h" 25 26 #define CPUTS(outstr) cputs(CC_ACCEL, outstr) 27 #define CPRINTF(format, args...) cprintf(CC_ACCEL, format, ## args) 28 #define CPRINTS(format, args...) cprints(CC_ACCEL, format, ## args) 29
CID 1407736: Parse warnings (PARSE_ERROR) function call is not allowed in a constant expression
30 STATIC_IF(CONFIG_ACCEL_FIFO) volatile uint32_t last_interrupt_timestamp; 31 32 /* 33 * Struct for pairing an engineering value with the register value for a 34 * parameter. 35 */
** CID 1407731: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/usb_pd_policy.c: 280 in dfp_consume_cable_response()
________________________________________________________________________________________________________ *** CID 1407731: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/usb_pd_policy.c: 280 in dfp_consume_cable_response() 274 payload[VDO_INDEX_PTYPE_CABLE1]; 275 } 276 /* 277 * Ref USB PD Spec 3.0 Pg 145. For active cable there are two VDOs. 278 * Hence storing the second VDO. 279 */
CID 1407731: Integer handling issues (CONSTANT_EXPRESSION_RESULT) "({...; 0;}) && is_vdo_present(cnt, 5)" is always false regardless of the values of its operands. This occurs as the logical first operand of "&&".
280 if (IS_ENABLED(CONFIG_USB_PD_REV30) && 281 is_vdo_present(cnt, VDO_INDEX_PTYPE_CABLE2) && 282 cable[port].type == IDH_PTYPE_ACABLE) { 283 cable[port].rev = PD_REV30; 284 cable[port].attr2.raw_value = payload[VDO_INDEX_PTYPE_CABLE2]; 285 }
** CID 1407725: Control flow issues (DEADCODE) /3rdparty/chromeec/common/usb_pd_policy.c: 205 in reset_pd_cable()
________________________________________________________________________________________________________ *** CID 1407725: Control flow issues (DEADCODE) /3rdparty/chromeec/common/usb_pd_policy.c: 205 in reset_pd_cable() 199 return 0; 200 } 201 202 void reset_pd_cable(int port) 203 { 204 if (IS_ENABLED(CONFIG_USB_PD_DECODE_SOP))
CID 1407725: Control flow issues (DEADCODE) Execution cannot reach this statement: "memset(&cable[port], 0, 32U);".
205 memset(&cable[port], 0, sizeof(cable[port])); 206 } 207 208 uint8_t get_usb_pd_mux_cable_type(int port) 209 { 210 return cable[port].type;
** CID 1407724: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/motion_sense.c: 904 in motion_sense_task()
________________________________________________________________________________________________________ *** CID 1407724: Integer handling issues (CONSTANT_EXPRESSION_RESULT) /3rdparty/chromeec/common/motion_sense.c: 904 in motion_sense_task() 898 /* 899 * Ask the host to flush the queue if 900 * - a flush event has been queued. 901 * - the queue is almost full, 902 * - we haven't done it for a while. 903 */
CID 1407724: Integer handling issues (CONSTANT_EXPRESSION_RESULT) "({...; 0;}) && (motion_sense_fifo_is_wake_up_needed() || event & (768UL /* (1UL << 8 + 1) / !!((1UL << 8 + 1) & 65535) | (1UL << 8) / !!((1UL << 8) & 65535) */) || (ap_event_interval > 0 && time_after(ts_begin_task.le.lo, ts_last_int.le.lo + ap_event_interval)))" is always false regardless of the values of its operands. This occurs as the logical operand of "if".
904 if (IS_ENABLED(CONFIG_ACCEL_FIFO) && 905 (motion_sense_fifo_is_wake_up_needed() || 906 event & (TASK_EVENT_MOTION_ODR_CHANGE | 907 TASK_EVENT_MOTION_FLUSH_PENDING) || 908 (ap_event_interval > 0 && 909 time_after(ts_begin_task.le.lo,
________________________________________________________________________________________________________ To view the defects in Coverity Scan visit, https://u15810271.ct.sendgrid.net/ls/click?upn=HRESupC-2F2Czv4BOaCWWCy7my0P0...
-
scan-admin＠coverity.com