im booting up a machine with coreboot and anytime i reboot the machine it never turns back on, i have to turn it back on by hand. i ran the nvramtool to see the bio settings and got this:
boot_option = Normal last_boot = Normal ECC_memory = Enable baud_rate = 115200 hw_scrubber = Enable interleave_chip_selects = Enable max_mem_clock = 166Mhz dual_core = Enable power_on_after_fail = Enable debug_level = Info boot_first = Network boot_second = Fallback_Network # Bad value -> boot_third = 0xf boot_index = 0x0 boot_countdown = 0x0 slow_cpu = off nmi = Disable iommu = Disable nvramtool: Can not read coreboot parameter user_data because layout info specifies CMOS area that is too wide.
i changed the boot_on_after_fail to Enable thinking that would fix my issue but it didnt.
does anyone have any other ideas on what other parameter could fix this?
On 29.05.2009 1:02 Uhr, Chris Kinney wrote:
im booting up a machine with coreboot and anytime i reboot the machine it never turns back on, i have to turn it back on by hand. i ran the nvramtool to see the bio settings and got this:
Dear Chris,
please tell us what mainboard it is.
Do you get any log on the serial console? You could try setting debug_level = Debug to get more information.
Does the machine physically power off? Or just not survive a reboot, but fans etc keep running?
Stefan
-
Chris Kinney -
Stefan Reinauer