[v2] r4919 - trunk/src/northbridge/amd/amdk8

Author: myles
Date: 2009-11-05 21:02:35 +0000 (Thu, 05 Nov 2009)
New Revision: 4919

Added:
   trunk/src/northbridge/amd/amdk8/util.c
Modified:
   trunk/src/northbridge/amd/amdk8/Makefile.inc
   trunk/src/northbridge/amd/amdk8/amdk8.h
Log:
Add debugging utility file for dumping routing registers on K8.

Ported from Ron's code in v3.

Signed-off-by: Myles Watson 
Acked-by: Ronald G. Minnich

Modified: trunk/src/northbridge/amd/amdk8/Makefile.inc
===================================================================
--- trunk/src/northbridge/amd/amdk8/Makefile.inc	2009-11-05 20:06:19 UTC (rev 4918)
+++ trunk/src/northbridge/amd/amdk8/Makefile.inc	2009-11-05 21:02:35 UTC (rev 4919)
@@ -3,6 +3,10 @@
 obj-y += get_sblk_pci1234.o
 obj-$(CONFIG_GENERATE_ACPI_TABLES) += amdk8_acpi.o

+# Enable this if you want to check the values of the PCI routing registers.
+# Call show_all_routes() anywhere amdk8.h is included.
+#obj-y += util.o
+
 # Not sure what to do with these yet. How did raminit_test even work?
 # Should be a target in -y form.
 #if CONFIG_K8_REV_F_SUPPORT

Modified: trunk/src/northbridge/amd/amdk8/amdk8.h
===================================================================
--- trunk/src/northbridge/amd/amdk8/amdk8.h	2009-11-05 20:06:19 UTC (rev 4918)
+++ trunk/src/northbridge/amd/amdk8/amdk8.h	2009-11-05 21:02:35 UTC (rev 4919)
@@ -8,4 +8,6 @@
         #include "amdk8_pre_f.h"
 #endif

+void showallroutes(int level, device_t dev);
+
 #endif /* AMDK8_H */

Added: trunk/src/northbridge/amd/amdk8/util.c
===================================================================
--- trunk/src/northbridge/amd/amdk8/util.c	                        (rev 0)
+++ trunk/src/northbridge/amd/amdk8/util.c	2009-11-05 21:02:35 UTC (rev 4919)
@@ -0,0 +1,275 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Vincent Legoll 
+ * Copyright (C) 2008 Ronald G. Minnich 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
+ */
+
+/*
+ * K8 northbridge utilities (dump routing registers).
+ * Designed to be called at any time.
+ * It can be called before RAM is set up by including this file.
+ * It can be called after RAM is set up by including amdk8.h and enabling the
+ * compilation of this file in src/northbridge/amd/amdk8/Makefile.inc.
+ */
+#ifndef __ROMCC__
+#include <console/console.h>
+#include <string.h>
+#include <device/pci.h>
+#include <cpu/amd/amdk8_sysconf.h>
+#include <device/pci_ops.h>
+#include "amdk8.h"
+#endif
+
+/* Function 1 */
+/* the DRAM, MMIO,and PCIIO routing are 64-bit registers, hence the ending at
+ * 0x78, 0xb8, and 0xd8
+ */
+#define DRAM_ROUTE_START	0x40
+#define DRAM_ROUTE_END		0x78
+#define MMIO_ROUTE_START	0x80
+#define MMIO_ROUTE_END		0xb8
+#define PCIIO_ROUTE_START	0xc0
+#define PCIIO_ROUTE_END		0xd8
+#define CONFIG_ROUTE_START	0xe0
+#define CONFIG_ROUTE_END	0xec
+
+#define PCI_IO_BASE0		0xc0
+#define PCI_IO_BASE1		0xc8
+#define PCI_IO_BASE2		0xd0
+#define PCI_IO_BASE3		0xd8
+#define PCI_IO_BASE_VGA_EN	(1 << 4)
+#define PCI_IO_BASE_NO_ISA	(1 << 5)
+
+#define BITS(r, shift, mask) (((r>>shift)&mask))
+
+/**
+ * Return "R" if the register has read-enable bit set.
+ */
+static const char *re(u32 i)
+{
+	return ((i & 1) ? "R" : "");
+}
+
+/**
+ * Return "W" if the register has write-enable bit set.
+ */
+static const char *we(u32 i)
+{
+	return ((i & 1) ? "W" : "");
+}
+
+/**
+ * Return a string containing the interleave settings.
+ */
+static const char *ileave(u32 base)
+{
+	switch ((base >> 8) & 7) {
+	case 0:
+		return "No interleave";
+	case 1:
+		return "2 nodes";
+	case 3:
+		return "4 nodes";
+	case 7:
+		return "8 nodes";
+	default:
+		return "Reserved";
+	}
+}
+
+/**
+ * Return the node number.
+ * For one case (config registers) these are not the right bit fields.
+ */
+static int node(u32 reg)
+{
+	return BITS(reg, 0, 0x7);
+}
+
+/**
+ * Return the link number.
+ * For one case (config registers) these are not the right bit fields.
+ */
+static int link(u32 reg)
+{
+	return BITS(reg, 4, 0x3);
+}
+
+/**
+ * Print the DRAM routing info for one base/limit pair.
+ *
+ * Show base, limit, dest node, dest link on that node, read and write
+ * enable, and interleave information.
+ *
+ * @param level Printing level
+ * @param which Register number
+ * @param base Base register
+ * @param lim Limit register
+ */
+static void showdram(int level, u8 which, u32 base, u32 lim)
+{
+	do_printk(level, "DRAM(%02x)%010llx-%010llx, ->(%d), %s, %s, %s, %d\n",
+	       which, (((u64) base & 0xffff0000) << 8),
+	       (((u64) lim & 0xffff0000) << 8) + 0xffffff,
+	       node(lim), re(base), we(base), ileave(base), (lim >> 8) & 3);
+}
+
+/**
+ * Print the config routing info for a config register.
+ *
+ * Show base, limit, dest node, dest link on that node, read and write
+ * enable, and device number compare enable
+ *
+ * @param level Printing level
+ * @param which Register number
+ * @param reg Config register
+ */
+static void showconfig(int level, u8 which, u32 reg)
+{
+	/* Don't use node() and link() here. */
+	do_printk(level, "CONFIG(%02x)%02x-%02x ->(%d,%d),%s %s (%s numbers)\n",
+	       which, BITS(reg, 16, 0xff), BITS(reg, 24, 0xff),
+	       BITS(reg, 4, 0x7), BITS(reg, 8, 0x3),
+	       re(reg), we(reg),
+	       BITS(reg, 2, 0x1)?"dev":"bus");
+}
+
+/**
+ * Print the PCIIO routing info for one base/limit pair.
+ *
+ * Show base, limit, dest node, dest link on that node, read and write
+ * enable, and VGA and ISA Enable.
+ *
+ * @param level Printing level
+ * @param which Register number
+ * @param base Base register
+ * @param lim Limit register
+ */
+static void showpciio(int level, u8 which, u32 base, u32 lim)
+{
+	do_printk(level, "PCIIO(%02x)%07x-%07x, ->(%d,%d), %s, %s,VGA %d ISA %d\n",
+	       which, BITS(base, 12, 0x3fff) << 12,
+	       (BITS(lim, 12, 0x3fff) << 12) + 0xfff, node(lim), link(lim),
+	       re(base), we(base), BITS(base, 4, 0x1), BITS(base, 5, 0x1));
+}
+
+/**
+ * Print the MMIO routing info for one base/limit pair.
+ *
+ * Show base, limit, dest node, dest link on that node, read and write
+ * enable, and CPU Disable, Lock, and Non-posted.
+ *
+ * @param level Printing level
+ * @param which Register number
+ * @param base Base register
+ * @param lim Limit register
+ */
+static void showmmio(int level, u8 which, u32 base, u32 lim)
+{
+	do_printk(level, "MMIO(%02x)%010llx-%010llx, ->(%d,%d), %s, %s, "
+	       "CPU disable %d, Lock %d, Non posted %d\n",
+	       which, ((u64) BITS(base, 0, 0xffffff00)) << 8,
+	       (((u64) BITS(lim, 0, 0xffffff00)) << 8) + 0xffff, node(lim),
+	       link(lim), re(base), we(base), BITS(base, 4, 0x1),
+	       BITS(base, 7, 0x1), BITS(lim, 7, 0x1));
+}
+
+/**
+ * Show all DRAM routing registers. This function is callable at any time.
+ *
+ * @param level The debug level.
+ * @param dev A 32-bit number in the standard bus/dev/fn format which is used
+ *            raw config space.
+ */
+static void showalldram(int level, device_t dev)
+{
+	u8 reg;
+	for (reg = DRAM_ROUTE_START; reg <= DRAM_ROUTE_END; reg += 8) {
+		u32 base = pci_read_config32(dev, reg);
+		u32 lim = pci_read_config32(dev, reg + 4);
+		if (base || lim!=(reg-DRAM_ROUTE_START)/8)
+			showdram(level, reg, base, lim);
+	}
+}
+
+/**
+ * Show all MMIO routing registers. This function is callable at any time.
+ *
+ * @param level The debug level.
+ * @param dev A 32-bit number in the standard bus/dev/fn format which is used
+ *            raw config space.
+ */
+static void showallmmio(int level, device_t dev)
+{
+	u8 reg;
+	for (reg = MMIO_ROUTE_START; reg <= MMIO_ROUTE_END; reg += 8) {
+		u32 base = pci_read_config32(dev, reg);
+		u32 lim = pci_read_config32(dev, reg + 4);
+		if (base || lim)
+			showmmio(level, reg, base, lim);
+	}
+}
+
+/**
+ * Show all PCIIO routing registers. This function is callable at any time.
+ *
+ * @param level The debug level.
+ * @param dev A 32-bit number in the standard bus/dev/fn format which is used
+ *            raw config space.
+ */
+static void showallpciio(int level, device_t dev)
+{
+	u8 reg;
+	for (reg = PCIIO_ROUTE_START; reg <= PCIIO_ROUTE_END; reg += 8) {
+		u32 base = pci_read_config32(dev, reg);
+		u32 lim = pci_read_config32(dev, reg + 4);
+		if (base || lim)
+			showpciio(level, reg, base, lim);
+	}
+}
+
+/**
+ * Show all config routing registers. This function is callable at any time.
+ *
+ * @param level The debug level.
+ * @param dev A 32-bit number in the standard bus/dev/fn format which is used
+ *            raw config space.
+ */
+static void showallconfig(int level, device_t dev)
+{
+	u8 reg;
+	for (reg = CONFIG_ROUTE_START; reg <= CONFIG_ROUTE_END; reg += 4) {
+		u32 val = pci_read_config32(dev, reg);
+		if (val)
+			showconfig(level, reg, val);
+	}
+}
+
+/**
+ * Show all routing registers. This function is callable at any time.
+ *
+ * @param level The debug level.
+ * @param dev A 32-bit number in the standard bus/dev/fn format which is used
+ *            raw config space.
+ */
+void showallroutes(int level, device_t dev)
+{
+	showalldram(level, dev);
+	showallmmio(level, dev);
+	showallpciio(level, dev);
+	showallconfig(level, dev);
+}