Re: [coreboot] Multiple payloads support?

[Nick]

Bayou is not necessary - use SeaBIOS to run coreinfo.

*./build/cbfstool ./build/coreboot.rom add-payload -f
/gitrepo/coreboot/payloads/coreinfo/build/coreinfo.elf -n img/coreinfo.elf
-t payload*

On Sun, Mar 20, 2016 at 7:02 PM, ron minnich  wrote:
> it's a bit of work but I got it to build two years ago.
>
> ron
>
> On Sun, Mar 20, 2016 at 6:56 PM Zheng Bao  wrote:
> > But Bayou seems to be dead. It can not be built. The definition like
> > "struct LAR" goes nowhere.
> > Zheng
> >
> > From: [e-mail]
> > Date: Sun, 20 Mar 2016 21:17:24 +0000
> > To: [e-mail]; [e-mail];
> > [e-mail]
> > Subject: Re: [coreboot] Multiple payloads support?
> >
> > It was done about 10 years ago and it was called bayou. Take a look in
> > the libpayload side.
> >
> > On Sat, Mar 19, 2016 at 11:30 PM Zheng Bao  wrote:
> >
> > Hi, all,
> > I am trying to integrate SeaBIOS and another payload(coreinfo, nvramcui)
> > into final image.
> >
> > After a quick code checking, current code in repo does not support
> > multiple payload, does it?
> >
> > I want to let Coreboot load and run nvramcui first. The user can decide
> > to change the
> > CMOS setting or not. If user want to save the setting, the system need to
> > reboot. If user wants
> > to give up the change, the system goes out of the nvramcui and goes into
> > SeaBIOS. Just like
> > other IBV's BIOS.
> >
> > Did anyone do this job before? Any suggestion?
> > Zheng
> >
> > coreboot mailing list: [e-mail]
> > https://www.coreboot.org/mailman/listinfo/coreboot
> >
> > -- coreboot mailing list: [e-mail]
> > https://www.coreboot.org/mailman/listinfo/coreboot