Bayou is not necessary - use SeaBIOS to run coreinfo.

./build/cbfstool ./build/coreboot.rom add-payload -f /gitrepo/coreboot/payloads/coreinfo/build/coreinfo.elf -n img/coreinfo.elf -t payload

On Sun, Mar 20, 2016 at 7:02 PM, ron minnich <> wrote:
it's a bit of work but I got it to build two years ago. 


On Sun, Mar 20, 2016 at 6:56 PM Zheng Bao <> wrote:
But Bayou seems to be dead. It can not be built. The definition like "struct LAR" goes nowhere.


Date: Sun, 20 Mar 2016 21:17:24 +0000
Subject: Re: [coreboot] Multiple payloads support?

It was done about 10 years ago and it was called bayou. Take a look in the libpayload side.

On Sat, Mar 19, 2016 at 11:30 PM Zheng Bao <> wrote:
Hi, all,
I am trying to integrate SeaBIOS and another payload(coreinfo, nvramcui)
into final image.

After a quick code checking, current code in repo does not support multiple payload, does it?

I want to let Coreboot load and run nvramcui first. The user can decide to change the
CMOS setting or not. If user want to save the setting, the system need to reboot. If user wants
to give up the change, the system goes out of the nvramcui and goes into SeaBIOS. Just like
other IBV's BIOS.

Did anyone do this job before? Any suggestion?

coreboot mailing list:

-- coreboot mailing list:

coreboot mailing list: