Here's a small set of patches for improving inteltool.
Warren Turkal (2): Add support for dumping RCBA registers for i7. Add support for dumping ACPI registers for i7.
util/inteltool/powermgt.c | 65 ++++++++++++++++++++++++++++++++++++++++++++ util/inteltool/rootcmplx.c | 5 ++- 2 files changed, 68 insertions(+), 2 deletions(-)
Signed-off-by: Warren Turkal wt@penguintechs.org --- util/inteltool/rootcmplx.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/util/inteltool/rootcmplx.c b/util/inteltool/rootcmplx.c index 215c150..cb5d2a3 100644 --- a/util/inteltool/rootcmplx.c +++ b/util/inteltool/rootcmplx.c @@ -36,14 +36,15 @@ int print_rcba(struct pci_dev *sb) case PCI_DEVICE_ID_INTEL_ICH7M: case PCI_DEVICE_ID_INTEL_ICH7DH: case PCI_DEVICE_ID_INTEL_ICH7MDH: + case PCI_DEVICE_ID_INTEL_ICH8: + case PCI_DEVICE_ID_INTEL_ICH8M: case PCI_DEVICE_ID_INTEL_ICH9DH: case PCI_DEVICE_ID_INTEL_ICH9DO: case PCI_DEVICE_ID_INTEL_ICH9R: case PCI_DEVICE_ID_INTEL_ICH9: case PCI_DEVICE_ID_INTEL_ICH9M: case PCI_DEVICE_ID_INTEL_ICH9ME: - case PCI_DEVICE_ID_INTEL_ICH8M: - case PCI_DEVICE_ID_INTEL_ICH8: + case PCI_DEVICE_ID_INTEL_ICH10R: case PCI_DEVICE_ID_INTEL_NM10: rcba_phys = pci_read_long(sb, 0xf0) & 0xfffffffe; break;
Signed-off-by: Warren Turkal wt@penguintechs.org --- util/inteltool/powermgt.c | 65 +++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 65 insertions(+), 0 deletions(-)
diff --git a/util/inteltool/powermgt.c b/util/inteltool/powermgt.c index 5f93835..3032f4d 100644 --- a/util/inteltool/powermgt.c +++ b/util/inteltool/powermgt.c @@ -21,6 +21,66 @@ #include <stdio.h> #include "inteltool.h"
+static const io_register_t ich10_pm_registers[] = { + { 0x00, 2, "PM1_STS" }, // PM1 Status; ACPI pointer: PM1a_EVT_BLK + { 0x02, 2, "PM1_EN" }, // PM1 Enables; ACPI pointer: PM1a_EVT_BLK+2 + { 0x04, 4, "PM1_CNT" }, // PM1 Control; ACPI pointer: PM1a_CNT_BLK + { 0x08, 4, "PM1_TMR" }, // PM1 Timer; ACPI pointer: PMTMR_BLK + { 0x0c, 4, "RESERVED" }, + { 0x10, 4, "PROC_CNT" }, // Processor Control; ACPI pointer: P_BLK +#if DANGEROUS_REGISTERS + /* These registers return 0 on read, but reading them may cause + * the system to enter Cx states, which might hang the system. + */ + { 0x14, 1, "LV2 (Mobile)" }, + { 0x15, 1, "LV3 (Mobile)" }, + { 0x16, 1, "LV4 (Mobile)" }, +#endif + { 0x17, 2, "RESERVED" }, + { 0x19, 1, "RESERVED" }, + { 0x1a, 2, "RESERVED" }, + { 0x1c, 4, "RESERVED" }, + { 0x20, 8, "GPE0_STS" }, // General Purpose Event 0 Status; ACPI pointer: GPE0_BLK + { 0x2C, 4, "GPE0_EN" }, // General Purpose Event 0 Enables; ACPI pointer: GPE0_BLK+8 + { 0x30, 4, "SMI_EN" }, + { 0x34, 4, "SMI_STS" }, + { 0x38, 2, "ALT_GP_SMI_EN" }, + { 0x3a, 2, "ALT_GP_SMI_STS" }, + { 0x3c, 1, "UPRWC" }, // USB Per-Port registers write control; + { 0x3d, 2, "RESERVED" }, + { 0x3f, 1, "RESERVED" }, + { 0x40, 2, "RESERVED" }, + { 0x42, 1, "GPE_CNTL" }, + { 0x43, 1, "RESERVED" }, + { 0x44, 2, "DEVACT_STS" }, // Device Activity Status + { 0x46, 2, "RESERVED" }, + { 0x48, 4, "RESERVED" }, + { 0x4c, 4, "RESERVED" }, + { 0x50, 1, "PM2_CNT (Mobile)" }, // PM2 Control (Mobile only); ACPI pointer: PM2a_CNT_BLK + { 0x51, 1, "RESERVED" }, + { 0x52, 2, "RESERVED" }, + { 0x54, 4, "C3_RES (Mobile)" }, + { 0x58, 4, "RESERVED" }, + { 0x5c, 4, "RESERVED" }, + /* Here start the TCO registers */ + { 0x60, 2, "TCO_RLD" }, + { 0x62, 1, "TCO_DAT_IN" }, + { 0x63, 1, "TCO_DAT_OUT" }, + { 0x64, 2, "TCO1_STS" }, + { 0x66, 2, "TCO2_STS" }, + { 0x68, 2, "TCO1_CNT" }, + { 0x6a, 2, "TCO2_CNT" }, + { 0x6c, 2, "TCO_MESSAGE" }, + { 0x6e, 1, "TCO_WDCNT" }, + { 0x6f, 1, "RESERVED" }, + { 0x70, 1, "SW_IRQ_GEN" }, + { 0x71, 1, "RESERVED" }, + { 0x72, 2, "TCO_TMR" }, + { 0x74, 4, "RESERVED" }, + { 0x78, 4, "RESERVED" }, + { 0x7c, 4, "RESERVED" }, +}; + static const io_register_t ich9_pm_registers[] = { { 0x00, 2, "PM1_STS" }, // PM1 Status; ACPI pointer: PM1a_EVT_BLK { 0x02, 2, "PM1_EN" }, // PM1 Enables; ACPI pointer: PM1a_EVT_BLK+2 @@ -473,6 +533,11 @@ int print_pmbase(struct pci_dev *sb) printf("\n============= PMBASE ============\n\n");
switch (sb->device_id) { + case PCI_DEVICE_ID_INTEL_ICH10R: + pmbase = pci_read_word(sb, 0x40) & 0xff80; + pm_registers = ich10_pm_registers; + size = ARRAY_SIZE(ich10_pm_registers); + break; case PCI_DEVICE_ID_INTEL_ICH7: case PCI_DEVICE_ID_INTEL_ICH7M: case PCI_DEVICE_ID_INTEL_ICH7DH: