r3692 build service

[coreboot information]

Dear coreboot readers!

This is the automated build check service of coreboot.

The developer "uwe" checked in revision 3692 to
the coreboot source repository and caused the following 
changes:

Change Log:
Add support for the ITE IT8661F/IT8770F, IT8673F, and IT8671F/IT8687R.

They all use a different init sequence than the more modern ITE Super I/Os.

For now we only use 0x370 as config port, but 0x3f0 or 0x3bd would also be
valid. Contrary to other Super I/Os, the config port for these is _not_
hardcoded via hardware, instead it can be programmed by software, i.e.
you get to choose whether you want to use 0x370, 0x3f0, or 0x3bd.

Tested on IT8671F by Uwe Hermann and on IT8770F by Urja Rannikko.

Signed-off-by: Urja Rannikko 
Signed-off-by: Uwe Hermann 
Acked-by: Urja Rannikko 
Acked-by: Uwe Hermann

Build Log:
Compilation of msi:ms9282 has been fixed

If something broke during this checkin please be a pain 
in uwe's neck until the issue is fixed.

If this issue is not fixed within 24h the revision should 
be backed out.

Best regards,
     coreboot automatic build system