[LinuxBIOS] r457 - in LinuxBIOSv3: arch/x86 include

Author: mjones
Date: 2007-07-18 21:19:48 +0200 (Wed, 18 Jul 2007)
New Revision: 457

Modified:
   LinuxBIOSv3/arch/x86/mc146818rtc.c
   LinuxBIOSv3/include/mc146818rtc.h
Log:
Clean up do_normal_boot() by adding defines, moving defines to the header file, and add a function header.

Signed-off-by: Marc Jones 
Acked-by: Ronald G. Minnich

Modified: LinuxBIOSv3/arch/x86/mc146818rtc.c
===================================================================
--- LinuxBIOSv3/arch/x86/mc146818rtc.c	2007-07-16 22:42:21 UTC (rev 456)
+++ LinuxBIOSv3/arch/x86/mc146818rtc.c	2007-07-18 19:19:48 UTC (rev 457)
@@ -2,6 +2,7 @@
  *
  * Copyright (C) 200X FIXME
  * Copyright (C) 2007 coresystems GmbH
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -42,75 +43,6 @@
 outb((val),RTC_PORT(1)); \
 })

-/* control registers - Moto names
- */
-#define RTC_REG_A		10
-#define RTC_REG_B		11
-#define RTC_REG_C		12
-#define RTC_REG_D		13
-
-
-/**********************************************************************
- * register details
- **********************************************************************/
-#define RTC_FREQ_SELECT	RTC_REG_A
-
-/* update-in-progress  - set to "1" 244 microsecs before RTC goes off the bus,
- * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,
- * totalling to a max high interval of 2.228 ms.
- */
-# define RTC_UIP		0x80
-# define RTC_DIV_CTL		0x70
-   /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */
-#  define RTC_REF_CLCK_4MHZ	0x00
-#  define RTC_REF_CLCK_1MHZ	0x10
-#  define RTC_REF_CLCK_32KHZ	0x20
-   /* 2 values for divider stage reset, others for "testing purposes only" */
-#  define RTC_DIV_RESET1	0x60
-#  define RTC_DIV_RESET2	0x70
-  /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
-# define RTC_RATE_SELECT 	0x0F
-#  define RTC_RATE_NONE		0x00
-#  define RTC_RATE_32786HZ	0x01
-#  define RTC_RATE_16384HZ	0x02
-#  define RTC_RATE_8192HZ	0x03
-#  define RTC_RATE_4096HZ	0x04
-#  define RTC_RATE_2048HZ	0x05
-#  define RTC_RATE_1024HZ	0x06
-#  define RTC_RATE_512HZ	0x07
-#  define RTC_RATE_256HZ	0x08
-#  define RTC_RATE_128HZ	0x09
-#  define RTC_RATE_64HZ		0x0a
-#  define RTC_RATE_32HZ		0x0b
-#  define RTC_RATE_16HZ		0x0c
-#  define RTC_RATE_8HZ		0x0d
-#  define RTC_RATE_4HZ		0x0e
-#  define RTC_RATE_2HZ		0x0f
-
-/**********************************************************************/
-#define RTC_CONTROL	RTC_REG_B
-# define RTC_SET 0x80		/* disable updates for clock setting */
-# define RTC_PIE 0x40		/* periodic interrupt enable */
-# define RTC_AIE 0x20		/* alarm interrupt enable */
-# define RTC_UIE 0x10		/* update-finished interrupt enable */
-# define RTC_SQWE 0x08		/* enable square-wave output */
-# define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
-# define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
-# define RTC_DST_EN 0x01	/* auto switch DST - works f. USA only */
-
-/**********************************************************************/
-#define RTC_INTR_FLAGS	RTC_REG_C
-/* caution - cleared by read */
-# define RTC_IRQF 0x80		/* any of the following 3 is active */
-# define RTC_PF 0x40
-# define RTC_AF 0x20
-# define RTC_UF 0x10
-
-/**********************************************************************/
-#define RTC_VALID	RTC_REG_D
-# define RTC_VRT 0x80		/* valid RAM and time */
-/**********************************************************************/
-
 #if defined(CONFIG_OPTION_TABLE) && (CONFIG_OPTION_TABLE == 1)

static int rtc_checksum_valid(int range_start, int range_end, int cks_loc)
@@ -311,7 +243,7 @@

static int cmos_error(void)
 {
-	unsigned char reg_d;
+	u8 reg_d;
    /* See if the cmos error condition has been flagged */
    reg_d = CMOS_READ(RTC_REG_D);
    return (reg_d & RTC_VRT) == 0;
@@ -319,8 +251,8 @@

static int cmos_chksum_valid(void)
 {
-	unsigned char addr;
-	unsigned long sum, old_sum;
+	u8 addr;
+	u32 sum, old_sum;
    sum = 0;
    /* Comput the cmos checksum */
    for(addr = LB_CKS_RANGE_START; addr <= LB_CKS_RANGE_END; addr++) {
@@ -338,24 +270,29 @@

int last_boot_normal(void)
 {
-	unsigned char byte;
+	u8 byte;
+
    byte = CMOS_READ(RTC_BOOT_BYTE);
-	return (byte & (1 << 1));
+	return (byte & RTC_LAST_BOOT_FLAG_SET);
 }

-static int do_normal_boot(void)
+/**
+  * Check CMOS for normal or fallback boot mode.
+  * Use lxbios to set normal mode once the system is operational.
+  */
+int do_normal_boot(void)
 {
-	unsigned char byte;
+	u8 byte;

if (cmos_error() || !cmos_chksum_valid()) {
-		unsigned char byte;
    	/* There are no impossible values, no cheksums so just
    	 * trust whatever value we have in the the cmos,
    	 * but clear the fallback bit.
    	 */
    	byte = CMOS_READ(RTC_BOOT_BYTE);
-		byte &= 0x0c;
-		byte |= MAX_REBOOT_CNT << 4;
+		byte &= ~(0x0f << RTC_BOOT_COUNT_SHIFT
+		 | RTC_LAST_BOOT_FLAG_SET | RTC_NORMAL_BOOT_FLAG_SET);
+		byte |= MAX_REBOOT_CNT << RTC_BOOT_COUNT_SHIFT;
    	CMOS_WRITE(byte, RTC_BOOT_BYTE);
    }

@@ -363,28 +300,28 @@
    byte = CMOS_READ(RTC_BOOT_BYTE);
    
    /* Are we in normal mode? */
-	if (byte & 1) {
-		byte &= 0x0f; /* yes, clear the boot count */
+	if (byte & RTC_NORMAL_BOOT_FLAG_SET) {
+		byte &= ~(0x0f << RTC_BOOT_COUNT_SHIFT); /* yes, clear the boot count */
    }

/* Properly set the last boot flag */
-	byte &= 0xfc;
+	byte &= ~(RTC_LAST_BOOT_FLAG_SET | RTC_NORMAL_BOOT_FLAG_SET);
    if ((byte >> 4) < MAX_REBOOT_CNT) {
-		byte |= (1<<1);
+		byte |= RTC_LAST_BOOT_FLAG_SET;
    }

/* Are we already at the max count? */
-	if ((byte >> 4) < MAX_REBOOT_CNT) {
-		byte += 1 << 4; /* No, add 1 to the count */
+	if ((byte >> RTC_BOOT_COUNT_SHIFT) < MAX_REBOOT_CNT) {
+		byte += 1 << RTC_BOOT_COUNT_SHIFT; /* No, add 1 to the count */
    }
    else {
-		byte &= 0xfc;	/* Yes, put in fallback mode */
+		byte &= ~RTC_NORMAL_BOOT_FLAG_SET;	/* Yes, put in fallback mode */
    }

/* Save the boot byte */
    CMOS_WRITE(byte, RTC_BOOT_BYTE);

-	return (byte & (1<<1));
+	return (byte & RTC_LAST_BOOT_FLAG_SET);
 }

Modified: LinuxBIOSv3/include/mc146818rtc.h
===================================================================
--- LinuxBIOSv3/include/mc146818rtc.h	2007-07-16 22:42:21 UTC (rev 456)
+++ LinuxBIOSv3/include/mc146818rtc.h	2007-07-18 19:19:48 UTC (rev 457)
@@ -1,6 +1,7 @@
 /*
  * Copyright (C) 200X FIXME
  * Copyright (C) 2007 coresystems GmbH
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -111,10 +112,14 @@
 #define LB_CKS_LOC		126
 #endif

-#define RTC_BOOT_BYTE   48
+#define RTC_BOOT_BYTE		48
+#define RTC_BOOT_COUNT_SHIFT	4
+#define RTC_LAST_BOOT_FLAG_SET	(1<<1)
+#define RTC_NORMAL_BOOT_FLAG_SET (1<<0)

void rtc_init(int invalid);
 int get_option(void *dest, char *name);
 int last_boot_normal(void);
+int do_normal_boot(void);

#endif /* MC146818RTC_H */