[PATCH] Fix printk format warning

List overview All Threads
Download

newer

older

The VGA rom doesn't work correctly...

r3970 - in trunk/coreboot-v2/src:...

Carl-Daniel Hailfinger

1 Mar 2009 1 Mar '09

6:44 p.m.

Fix printk format warning in amdk8_acpi.c.

Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net

Index: LinuxBIOSv2-asus_m2a-vm/src/northbridge/amd/amdk8/amdk8_acpi.c =================================================================== --- LinuxBIOSv2-asus_m2a-vm/src/northbridge/amd/amdk8/amdk8_acpi.c (Revision 3967) +++ LinuxBIOSv2-asus_m2a-vm/src/northbridge/amd/amdk8/amdk8_acpi.c (Arbeitskopie) @@ -128,7 +128,7 @@ basek = resk(res->base); sizek = resk(res->size);

-- http://www.hailfinger.org/

Show replies by date

Stefan Reinauer

1 Mar 1 Mar

7:24 p.m.

On 01.03.2009 19:44 Uhr, Carl-Daniel Hailfinger wrote:

...

Fix printk format warning in amdk8_acpi.c.

Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net

Index: LinuxBIOSv2-asus_m2a-vm/src/northbridge/amd/amdk8/amdk8_acpi.c

Are you sure this is a current tree?

...

=================================================================== --- LinuxBIOSv2-asus_m2a-vm/src/northbridge/amd/amdk8/amdk8_acpi.c (Revision 3967) +++ LinuxBIOSv2-asus_m2a-vm/src/northbridge/amd/amdk8/amdk8_acpi.c (Arbeitskopie) @@ -128,7 +128,7 @@ basek = resk(res->base); sizek = resk(res->size);

printk_debug("set_srat_mem: dev %s, res->index=%04x startk=%08x, sizek=%08x\n",

printk_debug("set_srat_mem: dev %s, res->index=%04lx startk=%08lx, sizek=%08lx\n", dev_path(dev), res->index, basek, sizek); /*

0-640K must be on node 0

Acked-by: Stefan Reinauer stepan@coresystems.de

-- coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. Tel.: +49 761 7668825 • Fax: +49 761 7664613 Email: info@coresystems.de • http://www.coresystems.de/ Registergericht: Amtsgericht Freiburg • HRB 7656 Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866

Carl-Daniel Hailfinger

2 Mar 2 Mar

1:32 a.m.

On 01.03.2009 20:24, Stefan Reinauer wrote:

...

On 01.03.2009 19:44 Uhr, Carl-Daniel Hailfinger wrote:

...
Fix printk format warning in amdk8_acpi.c.

Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net

Index: LinuxBIOSv2-asus_m2a-vm/src/northbridge/amd/amdk8/amdk8_acpi.c

Are you sure this is a current tree?

Yes. For easier tab completion, the v2 trees on my disk are named LinuxBIOSv2-* and the v3 trees are named corebootv3-*

...

Acked-by: Stefan Reinauer stepan@coresystems.de

Thanks!

I just went on a bugfix frenzy and fixed all printk format warnings triggered by the AMD 690/SB600 targets and would prefer to commit them in one go. This new patch includes the small patch you already acked.

Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net

Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690.c (working copy) @@ -129,7 +129,7 @@ device_t nb_dev = 0, sb_dev = 0; int dev_ind;

- printk_info("rs690_enable: dev=0x%x, VID_DID=0x%x\n", dev, get_vid_did(dev)); + printk_info("rs690_enable: dev=%p, VID_DID=0x%x\n", dev, get_vid_did(dev));

nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0)); if (!nb_dev) { Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_pcie.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_pcie.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_pcie.c (working copy) @@ -203,7 +203,7 @@ device_t sb_dev; struct southbridge_amd_rs690_config *cfg = (struct southbridge_amd_rs690_config *)nb_dev->chip_info; - printk_debug("gpp_sb_init nb_dev=0x%x, dev=0x%x, port=0x%x\n", nb_dev, dev, port); + printk_debug("gpp_sb_init nb_dev=0x%p, dev=0x%p, port=0x%x\n", nb_dev, dev, port);

/* init GPP core */ set_pcie_enable_bits(nb_dev, 0x20 | PCIE_CORE_INDEX_GPPSB, 1 << 8, Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_gfx.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_gfx.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_gfx.c (working copy) @@ -121,7 +121,7 @@ device_t k8_f0 = 0, k8_f2 = 0; device_t nb_dev = dev_find_slot(0, 0);

- printk_info("rs690_internal_gfx_enable dev=0x%x, nb_dev=0x%x.\n", dev, + printk_info("rs690_internal_gfx_enable dev=0x%p, nb_dev=0x%p.\n", dev, nb_dev);

/* set APERTURE_SIZE, 128M. */ @@ -417,7 +417,7 @@ struct southbridge_amd_rs690_config *cfg = (struct southbridge_amd_rs690_config *)nb_dev->chip_info;

- printk_info("rs690_gfx_init, nb_dev=0x%x, dev=0x%x, port=0x%x.\n", + printk_info("rs690_gfx_init, nb_dev=0x%p, dev=0x%p, port=0x%x.\n", nb_dev, dev, port);

/* step 0, REFCLK_SEL, skip A11 revision */ Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_sata.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_sata.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_sata.c (working copy) @@ -96,7 +96,7 @@ printk_spew("sata_bar2=%x\n", sata_bar2); /* 3040 */ printk_spew("sata_bar3=%x\n", sata_bar3); /* 3080 */ printk_spew("sata_bar4=%x\n", sata_bar4); /* 3000 */ - printk_spew("sata_bar5=%x\n", sata_bar5); /* e0309000 */ + printk_spew("sata_bar5=%p\n", sata_bar5); /* e0309000 */

/* Program the 2C to 0x43801002 */ dword = 0x43801002; Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_usb.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_usb.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_usb.c (working copy) @@ -94,7 +94,7 @@ /* pci_write_config32(dev, 0xf8, dword); */

usb2_bar0 = (u8 *) (pci_read_config32(dev, 0x10) & ~0xFF); - printk_info("usb2_bar0=%x\n", usb2_bar0); + printk_info("usb2_bar0=%p\n", usb2_bar0);

/* RPR5.4 Enables the USB PHY auto calibration resister to match 45ohm resistence */ dword = 0x00020F00; Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_hda.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_hda.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_hda.c (working copy) @@ -302,7 +302,7 @@ return;

base = (u8 *) ((u32)res->base); - printk_debug("base = %08x\n", base); + printk_debug("base = %p\n", base); codec_mask = codec_detect(base);

if (codec_mask) { Index: LinuxBIOSv2-printkformatwarnings/src/devices/device.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/devices/device.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/devices/device.c (working copy) @@ -358,7 +358,7 @@ base += size; printk_spew( - "%s %02x * [0x%08Lx - 0x%08Lx] %s\n", + "%s %02lx * [0x%08Lx - 0x%08Lx] %s\n", dev_path(dev), resource->index, resource->base, Index: LinuxBIOSv2-printkformatwarnings/src/cpu/x86/mtrr/mtrr.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/cpu/x86/mtrr/mtrr.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/cpu/x86/mtrr/mtrr.c (working copy) @@ -357,7 +357,7 @@ #endif } /* Allocate an msr */ - printk_spew(" Allocate an msr - basek = %08x, sizek = %08x,\n", basek, sizek); + printk_spew(" Allocate an msr - basek = %08lx, sizek = %08lx,\n", basek, sizek); state->range_startk = basek; state->range_sizek = sizek; } Index: LinuxBIOSv2-printkformatwarnings/src/cpu/x86/lapic/lapic_cpu_init.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/cpu/x86/lapic/lapic_cpu_init.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/cpu/x86/lapic/lapic_cpu_init.c (working copy) @@ -136,7 +136,7 @@ maxlvt = 4;

for (j = 1; j <= num_starts; j++) { - printk_spew("Sending STARTUP #%d to %u.\n", j, apicid); + printk_spew("Sending STARTUP #%d to %lu.\n", j, apicid); lapic_read_around(LAPIC_SPIV); lapic_write(LAPIC_ESR, 0); lapic_read(LAPIC_ESR); @@ -239,7 +239,7 @@ #warning "We may need to increase CONFIG_LB_MEM_TOPK, it need to be more than (0x100000+(20480 + STACK_SIZE)*CONFIG_MAX_CPU)\n" #endif if(stack_end > (CONFIG_LB_MEM_TOPK<<10)) { - printk_debug("start_cpu: Please increase the CONFIG_LB_MEM_TOPK more than %dK\n", stack_end>>10); + printk_debug("start_cpu: Please increase the CONFIG_LB_MEM_TOPK more than %luK\n", stack_end>>10); die("Can not go on\n"); } stack_end -= sizeof(struct cpu_info); Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/irq_tables.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/irq_tables.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/irq_tables.c (working copy) @@ -73,7 +73,7 @@ addr &= ~15;

/* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk_info("Writing IRQ routing tables to 0x%lx...", addr);

pirq = (void *)(addr); v = (u8 *) (addr); Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/acpi_tables.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/acpi_tables.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/acpi_tables.c (working copy) @@ -255,7 +255,7 @@ ((acpi_header_t *) AmlCode)->length);

current += dsdt->length; - printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt, dsdt->length); + printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); /* FADT */ printk_debug("ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/mainboard.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/mainboard.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/mainboard.c (working copy) @@ -61,7 +61,7 @@ { u8 byte;

- printk_info("enable_onboard_nic.\n"); + printk_info("%s.\n", __func__);

/* enable GPM8 output */ byte = pm_ioread(0x95); @@ -274,7 +274,7 @@ struct mainboard_config *mainboard = (struct mainboard_config *)dev->chip_info;

- printk_info("Mainboard Pistachio Enable. dev=0x%x\n", dev); + printk_info("Mainboard Pistachio Enable. dev=0x%p\n", dev);

#if (CONFIG_GFXUMA == 1) msr_t msr, msr2; @@ -308,7 +308,7 @@ }

uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ - printk_info("%s: uma size 0x%08lx, memory start 0x%08lx\n", + printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base);

/* TODO: TOP_MEM2 */ @@ -328,7 +328,7 @@ * in some circumstances we want the memory mentioned as reserved. */ #if (CONFIG_GFXUMA == 1) - printk_info("uma_memory_base=0x%lx, uma_memory_size=0x%lx \n", + printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/irq_tables.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/irq_tables.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/irq_tables.c (working copy) @@ -73,7 +73,7 @@ addr &= ~15;

/* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk_info("Writing IRQ routing tables to 0x%lx...", addr);

pirq = (void *)(addr); v = (u8 *) (addr); Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/acpi_tables.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/acpi_tables.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/acpi_tables.c (working copy) @@ -254,7 +254,7 @@ memcpy((void *)dsdt, (void *)AmlCode, ((acpi_header_t *) AmlCode)->length); current += dsdt->length; - printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt, dsdt->length); + printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); /* FADT */ printk_debug("ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current; Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/mainboard.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/mainboard.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/mainboard.c (working copy) @@ -61,7 +61,7 @@ { u8 byte;

- printk_info("enable_onboard_nic.\n"); + printk_info("%s.\n", __func__);

/* set index register 0C50h to 13h (miscellaneous control) */ outb(0x13, 0xC50); /* CMIndex */ @@ -202,7 +202,7 @@ struct mainboard_config *mainboard = (struct mainboard_config *)dev->chip_info;

- printk_info("Mainboard DBM690T Enable. dev=0x%x\n", dev); + printk_info("Mainboard DBM690T Enable. dev=0x%p\n", dev);

#if (CONFIG_GFXUMA == 1) msr_t msr, msr2; @@ -236,7 +236,7 @@ }

/* TODO: TOP_MEM2 */ @@ -256,7 +256,7 @@ * in some circumstances we want the memory mentioned as reserved. */ #if (CONFIG_GFXUMA == 1) - printk_info("uma_memory_base=0x%lx, uma_memory_size=0x%lx \n", + printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); Index: LinuxBIOSv2-printkformatwarnings/src/lib/malloc.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/lib/malloc.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/lib/malloc.c (working copy) @@ -27,7 +27,7 @@ { void *p;

- MALLOCDBG(("%s Enter, size %d, free_mem_ptr %p\n", __func__, size, free_mem_ptr)); + MALLOCDBG(("%s Enter, size %ld, free_mem_ptr 0x%08lx\n", __func__, size, free_mem_ptr)); if (size < 0) die("Error! malloc: Size < 0"); if (free_mem_ptr <= 0) Index: LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/amdk8_acpi.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/amdk8_acpi.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/amdk8_acpi.c (working copy) @@ -128,7 +128,7 @@ basek = resk(res->base); sizek = resk(res->size);

- printk_debug("set_srat_mem: dev %s, res->index=%04x startk=%08x, sizek=%08x\n", + printk_debug("set_srat_mem: dev %s, res->index=%04lx startk=%08lx, sizek=%08lx\n", dev_path(dev), res->index, basek, sizek); /* * 0-640K must be on node 0 Index: LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/northbridge.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/northbridge.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/northbridge.c (working copy) @@ -473,7 +473,7 @@ limit |= (nodeid & 7);

if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) { - printk_spew("%s, enabling legacy VGA IO forwarding for %s link %s\n", + printk_spew("%s, enabling legacy VGA IO forwarding for %s link 0x%x\n", __func__, dev_path(dev), link); base |= PCI_IO_BASE_VGA_EN; }

-- http://www.hailfinger.org/

Carl-Daniel Hailfinger

4 Mar 4 Mar

12:50 a.m.

On 02.03.2009 02:32, Carl-Daniel Hailfinger wrote:

...

On 01.03.2009 20:24, Stefan Reinauer wrote:

...
On 01.03.2009 19:44 Uhr, Carl-Daniel Hailfinger wrote:

...
Fix printk format warning in amdk8_acpi.c.

Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net

Index: LinuxBIOSv2-asus_m2a-vm/src/northbridge/amd/amdk8/amdk8_acpi.c

Are you sure this is a current tree?

Yes. For easier tab completion, the v2 trees on my disk are named LinuxBIOSv2-* and the v3 trees are named corebootv3-*

...
Acked-by: Stefan Reinauer stepan@coresystems.de

Thanks!

I just went on a bugfix frenzy and fixed all printk format warnings triggered by the AMD 690/SB600 targets and would prefer to commit them in one go. This new patch includes the small patch you already acked.

Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net

Any reviews? With this patch, the DBM690T and the Pistachio have no more printk format warnings.

Regards, Carl-Daniel

...

Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690.c

--- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690.c (working copy) @@ -129,7 +129,7 @@ device_t nb_dev = 0, sb_dev = 0; int dev_ind;

printk_info("rs690_enable: dev=0x%x, VID_DID=0x%x\n", dev, get_vid_did(dev));

printk_info("rs690_enable: dev=%p, VID_DID=0x%x\n", dev, get_vid_did(dev));

nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0)); if (!nb_dev) {

Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_pcie.c

--- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_pcie.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_pcie.c (working copy) @@ -203,7 +203,7 @@ device_t sb_dev; struct southbridge_amd_rs690_config *cfg = (struct southbridge_amd_rs690_config *)nb_dev->chip_info;

printk_debug("gpp_sb_init nb_dev=0x%x, dev=0x%x, port=0x%x\n", nb_dev, dev, port);

printk_debug("gpp_sb_init nb_dev=0x%p, dev=0x%p, port=0x%x\n", nb_dev, dev, port);

/* init GPP core */ set_pcie_enable_bits(nb_dev, 0x20 | PCIE_CORE_INDEX_GPPSB, 1 << 8,

Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_gfx.c

--- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_gfx.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_gfx.c (working copy) @@ -121,7 +121,7 @@ device_t k8_f0 = 0, k8_f2 = 0; device_t nb_dev = dev_find_slot(0, 0);

printk_info("rs690_internal_gfx_enable dev=0x%x, nb_dev=0x%x.\n", dev,

printk_info("rs690_internal_gfx_enable dev=0x%p, nb_dev=0x%p.\n", dev, nb_dev);

/* set APERTURE_SIZE, 128M. */

@@ -417,7 +417,7 @@ struct southbridge_amd_rs690_config *cfg = (struct southbridge_amd_rs690_config *)nb_dev->chip_info;

printk_info("rs690_gfx_init, nb_dev=0x%x, dev=0x%x, port=0x%x.\n",

printk_info("rs690_gfx_init, nb_dev=0x%p, dev=0x%p, port=0x%x.\n", nb_dev, dev, port);

/* step 0, REFCLK_SEL, skip A11 revision */

Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_sata.c

--- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_sata.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_sata.c (working copy) @@ -96,7 +96,7 @@ printk_spew("sata_bar2=%x\n", sata_bar2); /* 3040 */ printk_spew("sata_bar3=%x\n", sata_bar3); /* 3080 */ printk_spew("sata_bar4=%x\n", sata_bar4); /* 3000 */

printk_spew("sata_bar5=%x\n", sata_bar5); /* e0309000 */

printk_spew("sata_bar5=%p\n", sata_bar5); /* e0309000 */

/* Program the 2C to 0x43801002 */ dword = 0x43801002;

Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_usb.c

--- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_usb.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_usb.c (working copy) @@ -94,7 +94,7 @@ /* pci_write_config32(dev, 0xf8, dword); */

usb2_bar0 = (u8 *) (pci_read_config32(dev, 0x10) & ~0xFF);

printk_info("usb2_bar0=%x\n", usb2_bar0);

printk_info("usb2_bar0=%p\n", usb2_bar0);

/* RPR5.4 Enables the USB PHY auto calibration resister to match 45ohm resistence */ dword = 0x00020F00;

Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_hda.c

--- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_hda.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_hda.c (working copy) @@ -302,7 +302,7 @@ return;

base = (u8 *) ((u32)res->base);

printk_debug("base = %08x\n", base);

printk_debug("base = %p\n", base); codec_mask = codec_detect(base);

if (codec_mask) {

Index: LinuxBIOSv2-printkformatwarnings/src/devices/device.c

--- LinuxBIOSv2-printkformatwarnings/src/devices/device.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/devices/device.c (working copy) @@ -358,7 +358,7 @@ base += size; printk_spew(
		"%s %02x *  [0x%08Lx - 0x%08Lx] %s\n",
		"%s %02lx *  [0x%08Lx - 0x%08Lx] %s\n",
	dev_path(dev),
	resource->index, 
	resource->base, 
Index: LinuxBIOSv2-printkformatwarnings/src/cpu/x86/mtrr/mtrr.c

--- LinuxBIOSv2-printkformatwarnings/src/cpu/x86/mtrr/mtrr.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/cpu/x86/mtrr/mtrr.c (working copy) @@ -357,7 +357,7 @@ #endif } /* Allocate an msr */

printk_spew(" Allocate an msr - basek = %08x, sizek = %08x,\n", basek, sizek);

printk_spew(" Allocate an msr - basek = %08lx, sizek = %08lx,\n", basek, sizek); state->range_startk = basek; state->range_sizek = sizek;

} Index: LinuxBIOSv2-printkformatwarnings/src/cpu/x86/lapic/lapic_cpu_init.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/cpu/x86/lapic/lapic_cpu_init.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/cpu/x86/lapic/lapic_cpu_init.c (working copy) @@ -136,7 +136,7 @@ maxlvt = 4;

for (j = 1; j <= num_starts; j++) {
printk_spew("Sending STARTUP #%d to %u.\n", j, apicid);
printk_spew("Sending STARTUP #%d to %lu.\n", j, apicid);
lapic_read_around(LAPIC_SPIV); lapic_write(LAPIC_ESR, 0); lapic_read(LAPIC_ESR);
@@ -239,7 +239,7 @@ #warning "We may need to increase CONFIG_LB_MEM_TOPK, it need to be more than (0x100000+(20480 + STACK_SIZE)*CONFIG_MAX_CPU)\n" #endif if(stack_end > (CONFIG_LB_MEM_TOPK<<10)) {
	printk_debug("start_cpu: Please increase the CONFIG_LB_MEM_TOPK more than %dK\n", stack_end>>10);
	printk_debug("start_cpu: Please increase the CONFIG_LB_MEM_TOPK more than %luK\n", stack_end>>10);
die("Can not go on\n");
} stack_end -= sizeof(struct cpu_info);
Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/irq_tables.c

--- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/irq_tables.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/irq_tables.c (working copy) @@ -73,7 +73,7 @@ addr &= ~15;

/* This table must be betweeen 0xf0000 & 0x100000 */

printk_info("Writing IRQ routing tables to 0x%x...", addr);

printk_info("Writing IRQ routing tables to 0x%lx...", addr);

pirq = (void *)(addr); v = (u8 *) (addr);

Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/acpi_tables.c

--- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/acpi_tables.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/acpi_tables.c (working copy) @@ -255,7 +255,7 @@ ((acpi_header_t *) AmlCode)->length);

current += dsdt->length;

printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt, dsdt->length);

printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); /* FADT */ printk_debug("ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current;

Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/mainboard.c

--- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/mainboard.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/mainboard.c (working copy) @@ -61,7 +61,7 @@ { u8 byte;

printk_info("enable_onboard_nic.\n");

printk_info("%s.\n", __func__);

/* enable GPM8 output */ byte = pm_ioread(0x95);

@@ -274,7 +274,7 @@ struct mainboard_config *mainboard = (struct mainboard_config *)dev->chip_info;

printk_info("Mainboard Pistachio Enable. dev=0x%x\n", dev);

printk_info("Mainboard Pistachio Enable. dev=0x%p\n", dev);

#if (CONFIG_GFXUMA == 1) msr_t msr, msr2; @@ -308,7 +308,7 @@ }

uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */

printk_info("%s: uma size 0x%08lx, memory start 0x%08lx\n",

printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base);

/* TODO: TOP_MEM2 */

@@ -328,7 +328,7 @@ * in some circumstances we want the memory mentioned as reserved. */ #if (CONFIG_GFXUMA == 1)

printk_info("uma_memory_base=0x%lx, uma_memory_size=0x%lx \n",

printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size);

Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/irq_tables.c

--- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/irq_tables.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/irq_tables.c (working copy) @@ -73,7 +73,7 @@ addr &= ~15;

/* This table must be betweeen 0xf0000 & 0x100000 */

printk_info("Writing IRQ routing tables to 0x%x...", addr);

printk_info("Writing IRQ routing tables to 0x%lx...", addr);

pirq = (void *)(addr); v = (u8 *) (addr);

Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/acpi_tables.c

--- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/acpi_tables.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/acpi_tables.c (working copy) @@ -254,7 +254,7 @@ memcpy((void *)dsdt, (void *)AmlCode, ((acpi_header_t *) AmlCode)->length); current += dsdt->length;

printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt, dsdt->length);

printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); /* FADT */ printk_debug("ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current;

Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/mainboard.c

--- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/mainboard.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/mainboard.c (working copy) @@ -61,7 +61,7 @@ { u8 byte;

printk_info("enable_onboard_nic.\n");

printk_info("%s.\n", __func__);

/* set index register 0C50h to 13h (miscellaneous control) */ outb(0x13, 0xC50); /* CMIndex */

@@ -202,7 +202,7 @@ struct mainboard_config *mainboard = (struct mainboard_config *)dev->chip_info;

printk_info("Mainboard DBM690T Enable. dev=0x%x\n", dev);

printk_info("Mainboard DBM690T Enable. dev=0x%p\n", dev);

#if (CONFIG_GFXUMA == 1) msr_t msr, msr2; @@ -236,7 +236,7 @@ }

uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */

printk_info("%s: uma size 0x%08lx, memory start 0x%08lx\n",

printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base);

/* TODO: TOP_MEM2 */

@@ -256,7 +256,7 @@ * in some circumstances we want the memory mentioned as reserved. */ #if (CONFIG_GFXUMA == 1)

printk_info("uma_memory_base=0x%lx, uma_memory_size=0x%lx \n",

printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size);

Index: LinuxBIOSv2-printkformatwarnings/src/lib/malloc.c

--- LinuxBIOSv2-printkformatwarnings/src/lib/malloc.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/lib/malloc.c (working copy) @@ -27,7 +27,7 @@ { void *p;

MALLOCDBG(("%s Enter, size %d, free_mem_ptr %p\n", __func__, size, free_mem_ptr));

MALLOCDBG(("%s Enter, size %ld, free_mem_ptr 0x%08lx\n", __func__, size, free_mem_ptr)); if (size < 0) die("Error! malloc: Size < 0"); if (free_mem_ptr <= 0)

Index: LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/amdk8_acpi.c

--- LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/amdk8_acpi.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/amdk8_acpi.c (working copy) @@ -128,7 +128,7 @@ basek = resk(res->base); sizek = resk(res->size);

printk_debug("set_srat_mem: dev %s, res->index=%04x startk=%08x, sizek=%08x\n",

printk_debug("set_srat_mem: dev %s, res->index=%04lx startk=%08lx, sizek=%08lx\n", dev_path(dev), res->index, basek, sizek); /*

0-640K must be on node 0

Index: LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/northbridge.c

--- LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/northbridge.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/northbridge.c (working copy) @@ -473,7 +473,7 @@ limit |= (nodeid & 7);
if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) {
	printk_spew("%s, enabling legacy VGA IO forwarding for %s link %s\n",
	printk_spew("%s, enabling legacy VGA IO forwarding for %s link 0x%x\n",
	    __func__, dev_path(dev), link);
base |= PCI_IO_BASE_VGA_EN;
}

-- http://www.hailfinger.org/

Stefan Reinauer

12:54 a.m.

Carl-Daniel Hailfinger wrote:

...

On 02.03.2009 02:32, Carl-Daniel Hailfinger wrote:

...
On 01.03.2009 20:24, Stefan Reinauer wrote:

...
On 01.03.2009 19:44 Uhr, Carl-Daniel Hailfinger wrote:

...
Fix printk format warning in amdk8_acpi.c.

Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net

Index: LinuxBIOSv2-asus_m2a-vm/src/northbridge/amd/amdk8/amdk8_acpi.c

Are you sure this is a current tree?

Yes. For easier tab completion, the v2 trees on my disk are named LinuxBIOSv2-* and the v3 trees are named corebootv3-*

...
Acked-by: Stefan Reinauer stepan@coresystems.de

Thanks!

I just went on a bugfix frenzy and fixed all printk format warnings triggered by the AMD 690/SB600 targets and would prefer to commit them in one go. This new patch includes the small patch you already acked.

Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net

Any reviews? With this patch, the DBM690T and the Pistachio have no more printk format warnings.

Sure, go ahead.

Acked-by: Stefan Reinauer stepan@coresystems.de

...

...
Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690.c

--- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690.c (working copy) @@ -129,7 +129,7 @@ device_t nb_dev = 0, sb_dev = 0; int dev_ind;

printk_info("rs690_enable: dev=0x%x, VID_DID=0x%x\n", dev, get_vid_did(dev));

printk_info("rs690_enable: dev=%p, VID_DID=0x%x\n", dev, get_vid_did(dev));

nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0)); if (!nb_dev) {

Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_pcie.c

--- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_pcie.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_pcie.c (working copy) @@ -203,7 +203,7 @@ device_t sb_dev; struct southbridge_amd_rs690_config *cfg = (struct southbridge_amd_rs690_config *)nb_dev->chip_info;

printk_debug("gpp_sb_init nb_dev=0x%x, dev=0x%x, port=0x%x\n", nb_dev, dev, port);

printk_debug("gpp_sb_init nb_dev=0x%p, dev=0x%p, port=0x%x\n", nb_dev, dev, port);

/* init GPP core */ set_pcie_enable_bits(nb_dev, 0x20 | PCIE_CORE_INDEX_GPPSB, 1 << 8,

Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_gfx.c

--- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_gfx.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/rs690/rs690_gfx.c (working copy) @@ -121,7 +121,7 @@ device_t k8_f0 = 0, k8_f2 = 0; device_t nb_dev = dev_find_slot(0, 0);

printk_info("rs690_internal_gfx_enable dev=0x%x, nb_dev=0x%x.\n", dev,

printk_info("rs690_internal_gfx_enable dev=0x%p, nb_dev=0x%p.\n", dev, nb_dev);

/* set APERTURE_SIZE, 128M. */

@@ -417,7 +417,7 @@ struct southbridge_amd_rs690_config *cfg = (struct southbridge_amd_rs690_config *)nb_dev->chip_info;

printk_info("rs690_gfx_init, nb_dev=0x%x, dev=0x%x, port=0x%x.\n",

printk_info("rs690_gfx_init, nb_dev=0x%p, dev=0x%p, port=0x%x.\n", nb_dev, dev, port);

/* step 0, REFCLK_SEL, skip A11 revision */

Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_sata.c

--- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_sata.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_sata.c (working copy) @@ -96,7 +96,7 @@ printk_spew("sata_bar2=%x\n", sata_bar2); /* 3040 */ printk_spew("sata_bar3=%x\n", sata_bar3); /* 3080 */ printk_spew("sata_bar4=%x\n", sata_bar4); /* 3000 */

printk_spew("sata_bar5=%x\n", sata_bar5); /* e0309000 */

printk_spew("sata_bar5=%p\n", sata_bar5); /* e0309000 */

/* Program the 2C to 0x43801002 */ dword = 0x43801002;

Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_usb.c

--- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_usb.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_usb.c (working copy) @@ -94,7 +94,7 @@ /* pci_write_config32(dev, 0xf8, dword); */

usb2_bar0 = (u8 *) (pci_read_config32(dev, 0x10) & ~0xFF);

printk_info("usb2_bar0=%x\n", usb2_bar0);

printk_info("usb2_bar0=%p\n", usb2_bar0);

/* RPR5.4 Enables the USB PHY auto calibration resister to match 45ohm resistence */ dword = 0x00020F00;

Index: LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_hda.c

--- LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_hda.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/southbridge/amd/sb600/sb600_hda.c (working copy) @@ -302,7 +302,7 @@ return;

base = (u8 *) ((u32)res->base);

printk_debug("base = %08x\n", base);

printk_debug("base = %p\n", base); codec_mask = codec_detect(base);

if (codec_mask) {

Index: LinuxBIOSv2-printkformatwarnings/src/devices/device.c

--- LinuxBIOSv2-printkformatwarnings/src/devices/device.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/devices/device.c (working copy) @@ -358,7 +358,7 @@ base += size; printk_spew(
		"%s %02x *  [0x%08Lx - 0x%08Lx] %s\n",
		"%s %02lx *  [0x%08Lx - 0x%08Lx] %s\n",
	dev_path(dev),
	resource->index, 
	resource->base, 
Index: LinuxBIOSv2-printkformatwarnings/src/cpu/x86/mtrr/mtrr.c

--- LinuxBIOSv2-printkformatwarnings/src/cpu/x86/mtrr/mtrr.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/cpu/x86/mtrr/mtrr.c (working copy) @@ -357,7 +357,7 @@ #endif } /* Allocate an msr */

printk_spew(" Allocate an msr - basek = %08x, sizek = %08x,\n", basek, sizek);

printk_spew(" Allocate an msr - basek = %08lx, sizek = %08lx,\n", basek, sizek); state->range_startk = basek; state->range_sizek = sizek;

} Index: LinuxBIOSv2-printkformatwarnings/src/cpu/x86/lapic/lapic_cpu_init.c =================================================================== --- LinuxBIOSv2-printkformatwarnings/src/cpu/x86/lapic/lapic_cpu_init.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/cpu/x86/lapic/lapic_cpu_init.c (working copy) @@ -136,7 +136,7 @@ maxlvt = 4;

for (j = 1; j <= num_starts; j++) {
printk_spew("Sending STARTUP #%d to %u.\n", j, apicid);
printk_spew("Sending STARTUP #%d to %lu.\n", j, apicid);
lapic_read_around(LAPIC_SPIV); lapic_write(LAPIC_ESR, 0); lapic_read(LAPIC_ESR);
@@ -239,7 +239,7 @@ #warning "We may need to increase CONFIG_LB_MEM_TOPK, it need to be more than (0x100000+(20480 + STACK_SIZE)*CONFIG_MAX_CPU)\n" #endif if(stack_end > (CONFIG_LB_MEM_TOPK<<10)) {
	printk_debug("start_cpu: Please increase the CONFIG_LB_MEM_TOPK more than %dK\n", stack_end>>10);
	printk_debug("start_cpu: Please increase the CONFIG_LB_MEM_TOPK more than %luK\n", stack_end>>10);
die("Can not go on\n");
} stack_end -= sizeof(struct cpu_info);
Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/irq_tables.c

--- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/irq_tables.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/irq_tables.c (working copy) @@ -73,7 +73,7 @@ addr &= ~15;

/* This table must be betweeen 0xf0000 & 0x100000 */

printk_info("Writing IRQ routing tables to 0x%x...", addr);

printk_info("Writing IRQ routing tables to 0x%lx...", addr);

pirq = (void *)(addr); v = (u8 *) (addr);

Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/acpi_tables.c

--- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/acpi_tables.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/acpi_tables.c (working copy) @@ -255,7 +255,7 @@ ((acpi_header_t *) AmlCode)->length);

current += dsdt->length;

printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt, dsdt->length);

printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); /* FADT */ printk_debug("ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current;

Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/mainboard.c

--- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/mainboard.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/pistachio/mainboard.c (working copy) @@ -61,7 +61,7 @@ { u8 byte;

printk_info("enable_onboard_nic.\n");

printk_info("%s.\n", __func__);

/* enable GPM8 output */ byte = pm_ioread(0x95);

@@ -274,7 +274,7 @@ struct mainboard_config *mainboard = (struct mainboard_config *)dev->chip_info;

printk_info("Mainboard Pistachio Enable. dev=0x%x\n", dev);

printk_info("Mainboard Pistachio Enable. dev=0x%p\n", dev);

#if (CONFIG_GFXUMA == 1) msr_t msr, msr2; @@ -308,7 +308,7 @@ }

uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */

printk_info("%s: uma size 0x%08lx, memory start 0x%08lx\n",

printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base);

/* TODO: TOP_MEM2 */

@@ -328,7 +328,7 @@ * in some circumstances we want the memory mentioned as reserved. */ #if (CONFIG_GFXUMA == 1)

printk_info("uma_memory_base=0x%lx, uma_memory_size=0x%lx \n",

printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size);

Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/irq_tables.c

--- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/irq_tables.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/irq_tables.c (working copy) @@ -73,7 +73,7 @@ addr &= ~15;

/* This table must be betweeen 0xf0000 & 0x100000 */

printk_info("Writing IRQ routing tables to 0x%x...", addr);

printk_info("Writing IRQ routing tables to 0x%lx...", addr);

pirq = (void *)(addr); v = (u8 *) (addr);

Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/acpi_tables.c

--- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/acpi_tables.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/acpi_tables.c (working copy) @@ -254,7 +254,7 @@ memcpy((void *)dsdt, (void *)AmlCode, ((acpi_header_t *) AmlCode)->length); current += dsdt->length;

printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt, dsdt->length);

printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); /* FADT */ printk_debug("ACPI: * FADT\n"); fadt = (acpi_fadt_t *) current;

Index: LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/mainboard.c

--- LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/mainboard.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/mainboard/amd/dbm690t/mainboard.c (working copy) @@ -61,7 +61,7 @@ { u8 byte;

printk_info("enable_onboard_nic.\n");

printk_info("%s.\n", __func__);

/* set index register 0C50h to 13h (miscellaneous control) */ outb(0x13, 0xC50); /* CMIndex */

@@ -202,7 +202,7 @@ struct mainboard_config *mainboard = (struct mainboard_config *)dev->chip_info;

printk_info("Mainboard DBM690T Enable. dev=0x%x\n", dev);

printk_info("Mainboard DBM690T Enable. dev=0x%p\n", dev);

#if (CONFIG_GFXUMA == 1) msr_t msr, msr2; @@ -236,7 +236,7 @@ }

uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */

printk_info("%s: uma size 0x%08lx, memory start 0x%08lx\n",

printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base);

/* TODO: TOP_MEM2 */

@@ -256,7 +256,7 @@ * in some circumstances we want the memory mentioned as reserved. */ #if (CONFIG_GFXUMA == 1)

printk_info("uma_memory_base=0x%lx, uma_memory_size=0x%lx \n",

printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size);

Index: LinuxBIOSv2-printkformatwarnings/src/lib/malloc.c

--- LinuxBIOSv2-printkformatwarnings/src/lib/malloc.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/lib/malloc.c (working copy) @@ -27,7 +27,7 @@ { void *p;

MALLOCDBG(("%s Enter, size %d, free_mem_ptr %p\n", __func__, size, free_mem_ptr));

MALLOCDBG(("%s Enter, size %ld, free_mem_ptr 0x%08lx\n", __func__, size, free_mem_ptr)); if (size < 0) die("Error! malloc: Size < 0"); if (free_mem_ptr <= 0)

Index: LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/amdk8_acpi.c

--- LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/amdk8_acpi.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/amdk8_acpi.c (working copy) @@ -128,7 +128,7 @@ basek = resk(res->base); sizek = resk(res->size);

printk_debug("set_srat_mem: dev %s, res->index=%04x startk=%08x, sizek=%08x\n",

printk_debug("set_srat_mem: dev %s, res->index=%04lx startk=%08lx, sizek=%08lx\n", dev_path(dev), res->index, basek, sizek); /*

0-640K must be on node 0

Index: LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/northbridge.c

--- LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/northbridge.c (revision 3967) +++ LinuxBIOSv2-printkformatwarnings/src/northbridge/amd/amdk8/northbridge.c (working copy) @@ -473,7 +473,7 @@ limit |= (nodeid & 7);
if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) {
	printk_spew("%s, enabling legacy VGA IO forwarding for %s link %s\n",
	printk_spew("%s, enabling legacy VGA IO forwarding for %s link 0x%x\n",
	    __func__, dev_path(dev), link);
base |= PCI_IO_BASE_VGA_EN;
}

Carl-Daniel Hailfinger

1:08 a.m.

On 04.03.2009 01:54, Stefan Reinauer wrote:

...

Carl-Daniel Hailfinger wrote:

...
On 02.03.2009 02:32, Carl-Daniel Hailfinger wrote:

...
On 01.03.2009 20:24, Stefan Reinauer wrote:

...
On 01.03.2009 19:44 Uhr, Carl-Daniel Hailfinger wrote:

...
Fix printk format warning in amdk8_acpi.c.

Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net

Index: LinuxBIOSv2-asus_m2a-vm/src/northbridge/amd/amdk8/amdk8_acpi.c

Are you sure this is a current tree?

Yes. For easier tab completion, the v2 trees on my disk are named LinuxBIOSv2-* and the v3 trees are named corebootv3-*

...
Acked-by: Stefan Reinauer stepan@coresystems.de

Thanks!

I just went on a bugfix frenzy and fixed all printk format warnings triggered by the AMD 690/SB600 targets and would prefer to commit them in one go. This new patch includes the small patch you already acked.

Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net

Any reviews? With this patch, the DBM690T and the Pistachio have no more printk format warnings.

Sure, go ahead.

Acked-by: Stefan Reinauer stepan@coresystems.de

Thanks, committed in r3970.

Regards, Carl-Daniel

-- http://www.hailfinger.org/

5745

days inactive

5748

days old

coreboot@coreboot.org

5 comments

2 participants

tags (0)

participants (2)

Carl-Daniel Hailfinger
Stefan Reinauer