Re: tyan s2880 build broken?

[YhLu]

I will change the code to disable the lsi_scsi as the default.

Do you have lsi 1030 onboard?  You need to use it?

If you need to use it, I send you pre-built image, because I can not publish
the source code of lsi_scsi. LSI don’t want to.

Regards

YH

_____

发件人: HC Wang [mailto:[e-mail]] 
发送时间: 2004年4月26日 10:15
收件人: [e-mail]
主题: tyan s2880 build broken?

Hi,

I checked out linuxbios2 tree from sourceforge.net, and I have problem with
building bios for tyan s2880 motherboard, here is the error message from
buildtarget tyan/s2880:

Configuring PART mainboard, path tyan/s2880
===> NOTE: Changing default value of LB_CKS_RANGE_START
===> NOTE: Changing default value of LB_CKS_RANGE_END
===> NOTE: Changing default value of LB_CKS_LOC
Configuring DIR ../common/lsi_scsi/Config.lb
===> ERROR: Could not open file
"/home/hcwang/linux-bios/freebios2/src/mainboard/tyan/s2880/../common/lsi_sc
si/Config.lb"
tyan/s2880/Config.lb:0
mainboard/tyan/s2880/Config.lb:0
../common/lsi_scsi/Config.lb:0
[hcwang@primary targets]$ pwd
/home/hcwang/linux-bios/freebios2/targets

Has anybody experience similar problem?

Thanks,
HC

tyan s2880 build broken?

[ron minnich]

On Mon, 26 Apr 2004, YhLu wrote:
> If you need to use it, I send you pre-built image, because I can not publish
> the source code of lsi_scsi. LSI don¡¯t want to.

grr.

Is there a ROM BIOS for it?

ron

tyan s2880 build broken?

[ron minnich]

On Mon, 26 Apr 2004, YhLu wrote:
> I will change the code to disable the lsi_scsi as the default.
>
> Do you have lsi 1030 onboard?  You need to use it?
>
> If you need to use it, I send you pre-built image, because I can not publish
> the source code of lsi_scsi. LSI don¡¯t want to.

I committed the change and s2880 builds again.

ron

tyan s2880 build broken?

[ron minnich]

I just commented out the #dir ../ 
entry in mainboard/tyan/s2880/Config.lb and the buildtarget seems ok. I 
will commit.

ron

tyan s2880 build broken?

YhLu  writes:
> I will change the code to disable the lsi_scsi as the default.
>
> Do you have lsi 1030 onboard?  You need to use it?
>
> If you need to use it, I send you pre-built image, because I can not publish
> the source code of lsi_scsi. LSI don’t want to.

If you can't publish the source then distributing the binary with
the code compiled from that source linked in violates the GPL.

Eric