In our BIOS for the related platform, I don't see how we're disabling PCI. I see that we set DC_FB_ST_OFFSET (GX_BASE + 0x8310) to 0 and also DC_DUR_ST_OFFSET (GX_BASE + 0x8318).
Is the 00:12:4 a PCI address? Does that decode to Bus 0, Device 12 (decimal?), Function 4?
-- Steve G.
Steve Goodrich (Steven.Goodrich@amd.com) Advanced Micro Devices, Inc.
-----Original Message----- From: linuxbios-bounces@linuxbios.org [mailto:linuxbios-bounces@linuxbios.org] On Behalf Of Christian Sühs Sent: Friday, April 28, 2006 11:16 AM To: Ronald G Minnich Cc: Stefan Reinauer; Goodrich,Steven; LinuxBIOS Subject: Re: [LinuxBIOS] MB1030 / 3036 VGA comes up :D
in acalc, you would do this: x40000000 30 sr
Well, the graphic instructions for the geode are disabled in that case :D
because this value is writen to b8h (Graphic Control Registers)
However, I'm not sure what I should do next.
I think i will play around with the BC_XMAP_1 registers and will set the amd prefered values :D
Currently the whole video RAM section seems to be disabled. a0000 - bffff
chris
and get 1.
ron
-- linuxbios mailing list linuxbios@linuxbios.org http://www.openbios.org/mailman/listinfo/linuxbios
On 4/28/06, Goodrich,Steven steven.goodrich@amd.com wrote:
In our BIOS for the related platform, I don't see how we're disabling PCI. I see that we set DC_FB_ST_OFFSET (GX_BASE + 0x8310) to 0 and also DC_DUR_ST_OFFSET (GX_BASE + 0x8318).
Is the 00:12:4 a PCI address? Does that decode to Bus 0, Device 12 (decimal?), Function 4?
Yeah. Its the VGA device in the cs5530.
-- Richard A. Smith
Goodrich,Steven schrieb:
In our BIOS for the related platform, I don't see how we're disabling PCI. I see that we set DC_FB_ST_OFFSET (GX_BASE + 0x8310) to 0 and also DC_DUR_ST_OFFSET (GX_BASE + 0x8318).
Is the 00:12:4 a PCI address? Does that decode to Bus 0, Device 12 (decimal?), Function 4?
-- Steve G.
Yes,
1078:0104 [VendorID:DeviceID] that is the integrated Video Controller from the CS5530.
It should be possible to disable this device completly.
But how?
chris