[PATCH] artecgroup/dbe61: Use correct interrupt router location

[Mart Raudsepp]

artecgroup/dbe61: Use correct interrupt router location

Changes the interrupt router location to what all other Geode board ports are using, and
doesn't exclusively devote any IRQs for PCI usage, as no other Geode board does so.

Signed-off-by: Mart Raudsepp 
---
 mainboard/artecgroup/dbe61/irq_tables.h |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/mainboard/artecgroup/dbe61/irq_tables.h b/mainboard/artecgroup/dbe61/irq_tables.h
index 0a70e71..4649ef0 100644
--- a/mainboard/artecgroup/dbe61/irq_tables.h
+++ b/mainboard/artecgroup/dbe61/irq_tables.h
@@ -46,8 +46,8 @@ const struct irq_routing_table intel_irq_routing_table = {
    PIRQ_VERSION,    /* u16 version   */
    32 + 16 * IRQ_SLOT_COUNT,	/* Max. number of devices on the bus */
    0x00,			/* Where the interrupt router lies (bus) */
-	(0x12 << 3) | 0x0,	/* Where the interrupt router lies (dev) */
-	0x0800,			/* IRQs devoted exclusively to PCI usage */
+	(0x0F << 3) | 0x0,	/* Where the interrupt router lies (dev) */
+	0x00,			/* IRQs devoted exclusively to PCI usage */
    0x1022,			/* Vendor */
    0x208f,			/* Device */
    0,		/* Crap (miniport) */

[PATCH] artecgroup/dbe61: Use correct interrupt router location

[Carl-Daniel Hailfinger]

On 12.11.2008 19:05, Mart Raudsepp wrote:
> artecgroup/dbe61: Use correct interrupt router location
>
> Changes the interrupt router location to what all other Geode board ports are using, and
> doesn't exclusively devote any IRQs for PCI usage, as no other Geode board does so.
>
> Signed-off-by: Mart Raudsepp

Good catch!

Acked-by: Carl-Daniel Hailfinger

Regards,
Carl-Daniel