New subject: ISP header for x60, fallback: indicating normal boot from grub2

19 Jul 2014

      On 19.07.2014 07:42, Charles Devereaux wrote:
...
Hello,
On Wed, Jul 9, 2014 at 2:15 AM, Denis 'GNUtoo' Carikli
<GNUtoo@no-log.org mailto:GNUtoo@no-log.org> wrote:
My pomona clip had issues with its contact pins(the ones in contact
with the flash chip) over time, so I unmounted it and repaired it.

I tried pushing the pins down - it looks better but it didn't help. Mine
only work with a lot of duct tape to keep it firmly pressed to the
motherboard. Otherwise, it slides up just a bit, enough to avoid making
contact. It seems more like a problem with the plastic
Example in grub.cfg:
menuentry 'Normal' {
        cmosclean 0x30:0
        cmosclean 0x30:1
        cmosclean 0x30:2
        cmosclean 0x30:3
        cmosclean 0x30:4
        cmosclean 0x30:5

        halt
}

Interesting. Is there a reason why different values are used on gluglug
halt? cf http://samnoble.org/thinkpad/grub/gluglug.grub.custom.cfg:
The values are exactly the same. Search for hex.
...
There is only cbmemc, cbls and cbtime. They could be good menu options
but the output is displayed without a pager (so you can't see them as it
goes back to the menu - you have to enter a command line)
pager=1
...
Of all of these, cbtime would be especially interesting to add a title
to grub menu, to show if the boot was in normal or fallback and how long
it took.
I'll see if it's possible to add the result of a command to grub menu

Re: [coreboot] ISP header for x60, fallback: indicating normal boot from grub2