Hi,
I'm trying to get coreboot onto my old ASUS M2V (rev. 1.01g) motherboard, but so far I've had no luck. I'm currently trying to get the coreinfo payload running, as that seems like the simplest test case (I've also tried seabios, and failed).
After flashing, when I boot, nothing happens. No beeps, the monitor remains in power-save mode, the keyboard doesn't respond to any keypresses (not even holding down several keys for a long time generates any beeps), no blinking status LEDs, nothing on the serial port. Nothing.
I've tried with two different revisions, one from 2010-11-24 (the one that adds S3 support for ASUS M2V), and one from 2012-02-21 (all later revisions fail to compile with lots of different CBMEM problems).
In the 2010-11-24 revision, I've had to add reg++; reg--; in src/northbridge/amd/amdk8/raminit_f_dqs.c:setup_mtrr_dqs() and regm3++; regm3--; in src/southbridge/via/vt8237r/vt8237_ctrl.c:vt8237_cfg() to get rid of warnings about unused variables.
Flashing is done by simply running: ./flashrom -V -w coreboot.rom -c W39V040C
Does anyone here have any idea what might be wrong? Anyone got a working .config, tips to use a certain known working revision, a know working version of flashrom (although flashing two different versions of ASUS's BIOS using flashrom works well, so I'm guessing neither flashrom nor my usage of it is to blame), a working coreboot.rom they can share, or anything else that might help me move forward?
Using Debian unstable to build, if that's any help.
-
G