[coreboot - Bug #549] (New) coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530)
Issue #549 has been reported by Simon Dominic.
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB)
Issue #549 has been updated by Matt DeVillier.
Simon Dominic wrote:
When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
quite simply, coreboot's ACPI for your device booted in legacy BIOS mode isn't Windows compliant. Boot linux, install acpica-tools, run `sudo acpidump -b` then `sudo iasl -d *.dat` and zip/attach the resulting .dsl files here.
IMO edk2 is the better choice for running Win10/11, and is known to work well. A flashing cursor sounds like you changed the display mode to text vs graphical, or didn't reset your config when changing payloads. edk2 + libgfxinit with defaults should boot Windows on your device.
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1873
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB)
Issue #549 has been updated by Simon Dominic.
File dsl_files.zip added
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1874
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB)
Issue #549 has been updated by Simon Dominic.
Matt DeVillier wrote in #note-1:
IMO edk2 is the better choice for running Win10/11, and is known to work well. A flashing cursor sounds like you changed the display mode to text vs graphical, or didn't reset your config when changing payloads. edk2 + libgfxinit with defaults should boot Windows on your device.
You're talking about `Devices --> Graphics initialization`, right? That's probably it - I didn't touch that and by default is set to "Run VGA Option ROMS".
Btw, if I use the me_cleaner script to shrink the me, what should the size of cbfs be set to take up the free space?
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1875
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB)
Issue #549 has been updated by Matt DeVillier.
You're talking about `Devices --> Graphics initialization`, right? That's probably it - I didn't touch that and by default is set to "Run VGA Option ROMS".
Btw, if I use the me_cleaner script to shrink the me, what should the size of cbfs be set to take up the free space?
edk2 requires a graphical framebuffer, either libgfxinit w/linear high-res framebuffer, or VGA BIOS with a VESA mode set. The latter is not recommended, nor the default when edk2 is selected as the payload from a clean config.
don't mess with ME cleaner until you have coreboot working properly, no need to add another variable to the mix. the CBFS size can be set plenty large enough for edk2 (2MB should suffice) without needed to shrink the ME region / enlarge the bios region.
here is a sane defconfig for W530 + edk2:
CONFIG_VENDOR_LENOVO=y CONFIG_CBFS_SIZE=0x200000 CONFIG_BOARD_LENOVO_W530=y CONFIG_PAYLOAD_EDK2=y CONFIG_EDK2_BOOT_MANAGER_ESCAPE=y CONFIG_EDK2_FOLLOW_BGRT_SPEC=y # CONFIG_EDK2_FULL_SCREEN_SETUP is not set
obviously since no IFD/ME blobs are included, you would just flash the bios region (using `--ifd -i bios`)
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1876
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB)
Issue #549 has been updated by Simon Dominic.
What's your verdict on the .dsl files provided?
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1877
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB)
Issue #549 has been updated by Matt DeVillier.
Simon Dominic wrote in #note-5:
What's your verdict on the .dsl files provided?
nothing jumps out at me, but I also don't know what Windows in legacy boot vs Windows in UEFI boot wants differently -- just that they are
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1878
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB)
Issue #549 has been updated by Simon Dominic.
File boot.jpg added File shell.jpg added File menu.jpg added
Finally able to boot into edk2 - thanks a lot! Will test with Windows later.
The only problem is I can't boot into my existing (Debian) Linux drive encrypted with LUKS.
Pictures of the errors provided.
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1879
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB) boot.jpg (2.95 MB) shell.jpg (2.96 MB) menu.jpg (2.02 MB)
Issue #549 has been updated by Matt DeVillier.
Simon Dominic wrote in #note-7:
Finally able to boot into edk2 - thanks a lot! Will test with Windows later.
The only problem is I can't boot into my existing (Debian) Linux drive encrypted with LUKS.
Pictures of the errors provided.
well, if it's legacy installed, you need to migrate to a UEFI-compatible bootloader. Plenty of guides on adding an EFI partition and installing the bootloader
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1880
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB) boot.jpg (2.95 MB) shell.jpg (2.96 MB) menu.jpg (2.02 MB)
Issue #549 has been updated by Simon Dominic.
Matt DeVillier wrote in #note-4:
here is a sane defconfig for W530 + edk2:
CONFIG_VENDOR_LENOVO=y CONFIG_CBFS_SIZE=0x200000 CONFIG_BOARD_LENOVO_W530=y CONFIG_PAYLOAD_EDK2=y CONFIG_EDK2_BOOT_MANAGER_ESCAPE=y CONFIG_EDK2_FOLLOW_BGRT_SPEC=y # CONFIG_EDK2_FULL_SCREEN_SETUP is not set
With that defconfig confirmed to be working, I tried adding a few other things, including vga bios (to get external displays working): ``` CONFIG_VENDOR_LENOVO=y CONFIG_CBFS_SIZE=0x200000 CONFIG_VGA_BIOS_DGPU_ID="10de,0ffc" CONFIG_VGA_BIOS=y CONFIG_IFD_BIN_PATH="descriptor.bin" CONFIG_ME_BIN_PATH="me.bin" CONFIG_GBE_BIN_PATH="gbe.bin" CONFIG_VGA_BIOS_FILE="vgabios/8086,0166.rom" CONFIG_HAVE_IFD_BIN=y CONFIG_BOARD_LENOVO_W530=y CONFIG_H8_FN_CTRL_SWAP=y CONFIG_HAVE_ME_BIN=y CONFIG_USE_ME_CLEANER=y CONFIG_HAVE_GBE_BIN=y CONFIG_MAINBOARD_USE_LIBGFXINIT=y CONFIG_VGA_BIOS_DGPU=y CONFIG_VGA_BIOS_DGPU_FILE="vgabios/10de,0ffc.rom" CONFIG_PAYLOAD_EDK2=y CONFIG_EDK2_BOOT_MANAGER_ESCAPE=y # CONFIG_EDK2_FULL_SCREEN_SETUP is not set ```
However, CBFS at 2MB (0x200000) is too small to have VGA BIOS. Thus, I get this error: ``` Image SIZE 12582912 CBFS cpu_microcode_blob.bin CBFS fallback/ramstage CBFS config CBFS revision CBFS build_info CBFS fallback/dsdt.aml CBFS vbt.bin CBFS cmos_layout.bin CBFS pci8086,0166.rom CBFS pci10de,0ffc.rom CBFS fallback/postcar CBFS fallback/payload E: Could not add [build/UEFIPAYLOAD.fd, 1308190 bytes (1277 KB)@0x0]; too big? E: Failed to add 'build/UEFIPAYLOAD.fd' into ROM image. E: Failed while operating on 'COREBOOT' region! E: The image will be left unmodified. make: *** [Makefile.mk:1214: build/coreboot.pre] Error 1 ```
Changing it to 3MB (0x300000) creates a successful build. I assume CBFS at 3MB is acceptable/sane?
Btw, where do I find `CONFIG_EDK2_BOOT_MANAGER_ESCAPE=y` in menuconfig?
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1881
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB) boot.jpg (2.95 MB) shell.jpg (2.96 MB) menu.jpg (2.02 MB)
Issue #549 has been updated by Simon Dominic.
Simon Dominic wrote in #note-7:
Finally able to boot into edk2 - thanks a lot! Will test with Windows later.
The only problem is I can't boot into my existing (Debian) Linux drive encrypted with LUKS.
Pictures of the errors provided.
I reinstalled Debian but I still get the same message (boot.jpg). However, I have to manually boot from file `EFI/debian/grubx64.efi`. How can this be fixed to boot from there automatically?
Also, when I use nvramtool to change hybrid_graphics_mode to "Discrete Only", I get black screen. But displays shows for "Integrated Only" and "Dual Graphics".
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1882
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB) boot.jpg (2.95 MB) shell.jpg (2.96 MB) menu.jpg (2.02 MB)
Issue #549 has been updated by Matt DeVillier.
Simon Dominic wrote in #note-10:
I reinstalled Debian but I still get the same message (boot.jpg). However, I have to manually boot from file `EFI/debian/grubx64.efi`. How can this be fixed to boot from there automatically?
Normally, the bootloader would add the boot entry to the bootorder list. Do you have SMMSTORE enabled? That's needed for UEFI NVRAM to work. If so, you can add a bootorder entry manually for that target
Also, when I use nvramtool to change hybrid_graphics_mode to "Discrete Only", I get black screen. But displays shows for "Integrated Only" and "Dual Graphics".
I have no experience with dGPUs or hybrid graphics unfortunately
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1883
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB) boot.jpg (2.95 MB) shell.jpg (2.96 MB) menu.jpg (2.02 MB)
Issue #549 has been updated by Simon Dominic.
File ventoy-win11.jpg added
Matt DeVillier wrote in #note-1:
IMO edk2 is the better choice for running Win10/11, and is known to work well.
When I try to boot Windows iso from ventoy usb, I get an error: "The Boot Configuration Data for your PC is missing or contains errors."
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1884
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB) boot.jpg (2.95 MB) shell.jpg (2.96 MB) menu.jpg (2.02 MB) ventoy-win11.jpg (2.35 MB)
Issue #549 has been updated by Matt DeVillier.
Simon Dominic wrote in #note-12:
When I try to boot Windows iso from ventoy usb, I get an error: "The Boot Configuration Data for your PC is missing or contains errors."
no experience doing it that way, only via an ISO written to USB using MS' tool or Rufus.
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1885
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB) boot.jpg (2.95 MB) shell.jpg (2.96 MB) menu.jpg (2.02 MB) ventoy-win11.jpg (2.35 MB)
Issue #549 has been updated by Simon Dominic.
File rufus-win11.png added
Matt DeVillier wrote in #note-13:
no experience doing it that way, only via an ISO written to USB using MS' tool or Rufus.
Tried doing it with Rufus (keeping "Partition scheme" as GPT), but I get *this*.
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1886
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB) boot.jpg (2.95 MB) shell.jpg (2.96 MB) menu.jpg (2.02 MB) ventoy-win11.jpg (2.35 MB) rufus-win11.png (6.99 MB)
Issue #549 has been updated by Matt DeVillier.
Simon Dominic wrote in #note-14:
Tried doing it with Rufus (keeping "Partition scheme" as GPT), but I get *this*.
Rufus is breaking things by trying to unload the existing NTFS EFI driver and load its own. Version 4.5 added this new feature, anything earlier should work properly.
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1887
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB) boot.jpg (2.95 MB) shell.jpg (2.96 MB) menu.jpg (2.02 MB) ventoy-win11.jpg (2.35 MB) rufus-win11.png (6.99 MB)
Issue #549 has been updated by Simon Dominic.
File vga_rom_display_1.png added File vga_rom_display_2.png added File vga_rom_display_3.png added File vga_rom_display_4.png added
Matt DeVillier wrote in #note-4:
edk2 requires a graphical framebuffer, either libgfxinit w/linear high-res framebuffer, or VGA BIOS with a VESA mode set. The latter is not recommended, nor the default when edk2 is selected as the payload from a clean config.
I could be completely wrong, but I gather libgfxinit (as opposed to "VGA Option ROMS") is disabling (full) activation of the dGPU. If I wanted to go that latter not-recommended route, how should display mode be set up?
Attached is what menuconfig shows if I look through some of the settings for "Display" (if I choose "VGA Option ROMS" as "Graphics initialization"): * Screenshot 1 is what "Display" looks like without touching anything (Here, "Framebuffer mode" can only be set to "Legacy VGA text mode"). * 2 is ticking "Set framebuffer graphics resolution" and touching nothing else. * 3 shows the options for "Framebuffer mode" after doing 2. * 4 shows what it looks like after setting "Framebuffer mode" to "VESA framebuffer".
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1891
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB) boot.jpg (2.95 MB) shell.jpg (2.96 MB) menu.jpg (2.02 MB) ventoy-win11.jpg (2.35 MB) rufus-win11.png (6.99 MB) vga_rom_display_1.png (64.5 KB) vga_rom_display_2.png (71.4 KB) vga_rom_display_3.png (58.5 KB) vga_rom_display_4.png (73.3 KB)
Issue #549 has been updated by Simon Dominic.
Simon Dominic wrote in #note-16:
I could be completely wrong, but I gather libgfxinit (as opposed to "VGA Option ROMS") is disabling (full) activation of the dGPU. If I wanted to go that latter not-recommended route, how should display mode be set up?
Any thoughts?
---------------------------------------- Bug #549: coreboot 24.05: SeaBIOS Windows 10/11 BSOD "ACPI BIOS ERROR" (Thinkpad W530) https://ticket.coreboot.org/issues/549#change-1897
* Author: Simon Dominic * Status: New * Priority: Normal * Category: board support * Target version: master * Start date: 2024-07-31 * Affected versions: master * Affected hardware: Lenovo ThinkPad W530 * Affected OS: Windows 10/11 ---------------------------------------- When using the latest coreboot (i.e. using command `git clone https://review.coreboot.org/coreboot%60), which is currently 24.05, to build a rom for Thinkpad W530, I get BSOD with "ACPI BIOS ERROR" when trying to boot into Windows 10 or 11 from SeaBIOS. Even just booting from a Windows install usb will show this error.
This is even with incorporating the vga bios files (so i can external displays to work) - see my defconfig.
Did consider using EDK2 apparently Windows support is pretty solid, but could never make a successful build - not that `make` command had errors, but once flashing, would just having white underscore and have to recover with external flashing. A separate issue to write about in and of itself, but I prefer SeaBIOS so I'll be sticking with that.
I am quite new to coreboot - using for only about 2-3 months now. Let me know if there is further information I should provide.
---Files-------------------------------- defconfig (590 Bytes) w530_bsod.jpg (1.98 MB) dsl_files.zip (25 KB) boot.jpg (2.95 MB) shell.jpg (2.96 MB) menu.jpg (2.02 MB) ventoy-win11.jpg (2.35 MB) rufus-win11.png (6.99 MB) vga_rom_display_1.png (64.5 KB) vga_rom_display_2.png (71.4 KB) vga_rom_display_3.png (58.5 KB) vga_rom_display_4.png (73.3 KB)
-
Matt DeVillier -
Simon Dominic