Re: [LinuxBIOS] broadcom HT1000 SATA PHY initializing

[Jia Jianwei]

I'm using LinuxBIOS to test it.  (Standard system BIOS seems linked an
option rom to do the initialization and working fine).

Jianwei

----- Original Message ----- 
From: "Lu, Yinghai" 
To: "Jia Jianwei" ; 
Sent: Thursday, March 30, 2006 6:08 PM
Subject: RE: [LinuxBIOS] broadcom HT1000 SATA PHY initializing
> System BIOS or LinuxBIOS?
>
> Did you base the code in the tree?
>
> YH
>
> -----Original Message-----
> From: [e-mail]
> [mailto:[e-mail]] On Behalf Of Jia Jianwei
> Sent: Thursday, March 30, 2006 12:36 PM
> To: [e-mail]
> Subject: [LinuxBIOS] broadcom HT1000 SATA PHY initializing
>
> I'm porting BIOS on a AMD opteron system with broadcom HT2000 and HT1000
> chipset.  I meet a problem when initilizing SATA device of HT1000.  The
> SATA
> PHY status(0x40)always return a disable status(04), whatever I did with
> the
> PHY reset ( set 0x48 bit 0 and clear it ).  Can anyone give me some
> advices?
> Thanks in advance!
>
> Best Regards,
> Jianwei
>
> *** Disclaimer: This message may contain privileged and/or confidential
> information.  If you have received this e-mail in error or are not the
> intended recipient, you may not use, copy, disseminate or distribute it;
> do not open any attachments, delete it immediately from your system and
> notify the sender promptly by e-mail that you have done so.  Thank you.