I'm using LinuxBIOS to test it. (Standard system BIOS seems linked an
option rom to do the initialization and working fine).
----- Original Message -----
From: "Lu, Yinghai" <yinghai.lu(a)amd.com>
To: "Jia Jianwei" <JJia(a)Fortinet.com>om>; <linuxbios(a)linuxbios.org>
Sent: Thursday, March 30, 2006 6:08 PM
Subject: RE: [LinuxBIOS] broadcom HT1000 SATA PHY initializing
System BIOS or LinuxBIOS?
Did you base the code in the tree?
[mailto:firstname.lastname@example.org] On Behalf Of Jia Jianwei
Sent: Thursday, March 30, 2006 12:36 PM
Subject: [LinuxBIOS] broadcom HT1000 SATA PHY initializing
I'm porting BIOS on a AMD opteron system with broadcom HT2000 and HT1000
chipset. I meet a problem when initilizing SATA device of HT1000. The
PHY status(0x40)always return a disable status(04), whatever I did with
PHY reset ( set 0x48 bit 0 and clear it ). Can anyone give me some
Thanks in advance!
*** Disclaimer: This message may contain privileged and/or confidential
information. If you have received this e-mail in error or are not the
intended recipient, you may not use, copy, disseminate or distribute it;
do not open any attachments, delete it immediately from your system and
notify the sender promptly by e-mail that you have done so. Thank you.
linuxbios mailing list