Hello everybody, Dear Paul wrote:
Could you please provide an URL for this board and the information
listed in the FAQ »Will coreboot work on my machine?« [2].
1. Board vendor: AAEON Board name: Gene5315 Rev.B CPU: AMD Geode LX 800 Northbridge: AMD Geode™ LX Southbridge: AMD Geode™ CS5536 ROM chip package: PLCC
2. Output of "lspci -tvnn": k2000@k2000-desktop:~$ lspci -tvnn -[0000:00]-+-01.0 Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] +-01.1 Advanced Micro Devices [AMD] Geode LX Video [1022:2081] +-01.2 Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082] +-06.0 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] +-09.0 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] +-0f.0 Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] +-0f.2 Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] +-0f.3 Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio [1022:2093] +-0f.4 Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] -0f.5 Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] k2000@k2000-desktop:~$ 3. Super I/O: ITE IT8712F
4. Output of "flashrom -V": k2000@k2000-desktop:~$ flashrom -V flashrom v0.9.6.1-r1564 on Linux 2.6.32-38-generic (i586) flashrom is free software, get the source code at http://www.flashrom.org
flashrom was built with libpci 3.0.0, GCC 4.4.3, little endian Command line (1 args): flashrom -V Please select a programmer with the --programmer parameter. Valid choices are: internal, dummy, nic3com, nicrealtek, gfxnvidia, drkaiser, satasii, serprog, buspirate_spi, rayer_spi, pony_spi, nicintel, nicintel_spi, ogp_spi, satamv, linux_spi k2000@k2000-desktop:~$ 5. URL for board Gene5315 Rev.B [1].
Dear Paul wrote: >You should try it. Just make sure you have a way to recover from a >failed flash, when it does not work as also documented in the FAQ [4].
I tryed to record coreboot in bios chip. Coreboot could not to run system.
Thanks.
Sergey