Hello everybody,

    Dear Paul wrote:
> Could you please provide an URL for this board and the information
>listed in the FAQ »Will coreboot work on my machine?« [2]. 

1.  Board vendor: AAEON
     Board name: Gene5315 Rev.B
     CPU: AMD Geode LX 800
     Northbridge: AMD Geode™ LX
     Southbridge:  AMD Geode™ CS5536
     ROM chip package: PLCC

2. Output of "lspci -tvnn":

   k2000@k2000-desktop:~$ lspci -tvnn
   -[0000:00]-+-01.0  Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080]
           +-01.1  Advanced Micro Devices [AMD] Geode LX Video [1022:2081]
           +-01.2  Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082]
           +-06.0  Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
           +-09.0  Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
           +-0f.0  Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090]
           +-0f.2  Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a]
           +-0f.3  Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio [1022:2093]
           +-0f.4  Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094]
           \-0f.5  Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095]
   k2000@k2000-desktop:~$ 

3. Super I/O:   ITE IT8712F 

4. Output of "flashrom -V":
 

    k2000@k2000-desktop:~$ flashrom -V
    flashrom v0.9.6.1-r1564 on Linux 2.6.32-38-generic (i586) 
    flashrom is free software, get the source code at http://www.flashrom.org

   flashrom was built with libpci 3.0.0, GCC 4.4.3, little endian 
   Command line (1 args): flashrom -V
   Please select a programmer with the --programmer parameter.
   Valid choices are:
   internal, dummy, nic3com, nicrealtek, gfxnvidia, drkaiser, satasii, serprog,
   buspirate_spi, rayer_spi, pony_spi, nicintel, nicintel_spi, ogp_spi, satamv,
   linux_spi
   k2000@k2000-desktop:~$ 

5.  URL for board Gene5315 Rev.B [1].

    Dear Paul wrote:
 >You should try it. Just make sure you have a way to recover from a
 >failed flash, when it does not work as also documented in the FAQ [4]. 

I tryed to record coreboot in bios chip.  Coreboot could not to run system. 

Thanks.

Sergey

[1] http://www.aaeonusa.com/products/details/?item_id=1060