Hi,
I am trying to bring up the AMD G series Olive hill plus mainboard with coreboot.
These are the options i have enabled in make menuconfig but I am not able to see anything on the screen when i power on the board. Could someone please let me know if I am missing something.
• General / Use CMOS for configuration values = enable (CMOS defaults are located in your boards directory src/mainboard/OEM/MODEL/cmos.default) • General / Include the coreboot .config file into the ROM image • General / Compress ramstage with LZMA • Mainboard / Mainboard vendor = AMD • Mainboard / Mainboard model = Olive Hill plus • Mainboard / ROM chip size = 8 MB • Chipset / Include CPU microcode in CBFS = Do not include microcode updates (NOTE: you probably want to enable it on some systems) • Chipset / Enable Hudson XHCI Controller • Chipset / Add xhci firmware
• (3rdparty/blobs/southbridge/amd/avalon/xhci.bin) XHCI firmware path and filename (3rdparty/blobs/southbridge/amd/avalon/PSP/AmdPubKey.bin) AMD public Key • Devices / Run VGA Option ROMs • Devices / Add a VGA BIOS image (3rdparty/blobs/northbridge/amd/00730F01/VBIOS.bin) VGA BIOS path and filename (1002,9850) VGA device PCI IDs • Display / Keep VESA framebuffer = disable (disable for text-mode graphics, enable for coreboot vesa framebuffer) • Generic Drivers / Serial port on SuperIO • Generic Drivers / Support Intel PCI-e WiFi adapters • Console / Squelch AP CPUs from early console. • Console / Serial port console output • Console / Use onboard VGA as primary video device • Console / Send console output to a CBMEM buffer • Console / Send POST codes to an external device • Console / Send POST codes to an IO port • System tables / [*] Generate an MP table
• System tables / [*] Generate a PIRQ table
• System tables / [*] Generate SMBIOS tables
• Payload / SeaBIOS version (1.10.2) ---> • Payload / Use LZMA compression for payloads