These are the options i have enabled in make menuconfig but I am not able to see anything on the screen when i power on the board.
Could someone please let me know if I am missing something.
• General / Use CMOS for configuration values = enable (CMOS defaults are located in your boards directory src/mainboard/OEM/MODEL/cmos.default)
• General / Include the coreboot .config file into the ROM image
• General / Compress ramstage with LZMA
• Mainboard / Mainboard vendor = AMD
• Mainboard / Mainboard model = Olive Hill plus
• Mainboard / ROM chip size = 8 MB
• Chipset / Include CPU microcode in CBFS = Do not include microcode updates (NOTE: you probably want to enable it on some systems)
• Chipset / Enable Hudson XHCI Controller
• Chipset / Add xhci firmware
• (3rdparty/blobs/southbridge/amd/avalon/xhci.bin) XHCI firmware path and filename
(3rdparty/blobs/southbridge/amd/avalon/PSP/AmdPubKey.bin) AMD public Key
• Devices / Run VGA Option ROMs
• Devices / Add a VGA BIOS image
(3rdparty/blobs/northbridge/amd/00730F01/VBIOS.bin) VGA BIOS path and filename
(1002,9850) VGA device PCI IDs
• Display / Keep VESA framebuffer = disable (disable for text-mode graphics, enable for coreboot vesa framebuffer)
• Generic Drivers / Serial port on SuperIO
• Generic Drivers / Support Intel PCI-e WiFi adapters
• Console / Squelch AP CPUs from early console.
• Console / Serial port console output
• Console / Use onboard VGA as primary video device
• Console / Send console output to a CBMEM buffer
• Console / Send POST codes to an external device
• Console / Send POST codes to an IO port
• System tables / [*] Generate an MP table
• System tables / [*] Generate a PIRQ table
• System tables / [*] Generate SMBIOS tables
• Payload / SeaBIOS version (1.10.2) --->
• Payload / Use LZMA compression for payloads