Re: [coreboot] Coreboot is failing to build

[Zoran Stojsavljevic]

> tar zxf tarballs/libelf-0.8.13.tar.gz

What about the following command: *$ tar -xf libelf-0.8.13.tar.gz *?
($ uname -a -> Linux localhost.localdomain *4.6.5-300.fc24.x86_64*)

Zoran

On Sun, Aug 14, 2016 at 10:12 AM, Ali H. Fardan  wrote:
> Greetings,
>
> Coreboot is failing to build after running 'make crossgcc'
> this error occured when building libreboot too, could any-
> one figure it out? Might be that the mirror of libelf is
> outdated.
>
> Raiz
>
> user@user-ThinkPad-X200:~/Downloads/coreboot$ make crossgcc V=1
> rm -rf doxygen
> make -C payloads/coreinfo clean;   make -C payloads/nvramcui clean;   make
> -C payloads/libpayload clean;   make -C payloads/external/depthcharge
> clean;   make -C payloads/external/SeaBIOS clean;   make -C
> payloads/external/U-Boot clean;   make -C payloads/external/Memtest86Plus
> clean;   make -C payloads/external/iPXE clean;   make -C
> payloads/external/tint clean;
> rm -rf build/*.elf build/*.o .xcompile
> rm -f nvramcui.elf
> rm -rf doxygen
> rm -f  build/libpayload.a
> rm -f  .xcompile
> rm -f
> rmdir -p  2>/dev/null >/dev/null || true
> rm -f .ccwrap junit_config junit_config.old
> test -d /home/user/Downloads/coreboot/payloads/external/depthcharge/depthcharge/build
> && rm -rf /home/user/Downloads/coreboot/payloads/external/depthcharge/depthcharge/build
> || exit 0
> test -d seabios/out && rm -rf seabios/out || exit 0
> test -d u-boot && make -C u-boot clean || exit 0
> test -d /home/user/Downloads/coreboot/payloads/external/Memtest86Plus/memtest86plus
> && make -C /home/user/Downloads/coreboot/payloads/external/Memtest86Plus/memtest86plus
> clean || exit 0
> test -d ipxe && make -C ipxe/src veryclean || exit 0
> rm -f ipxe/ipxe.rom
> test -d tint && make -C tint clean || exit 0
> rm -f build/ramstage?* build/coreboot.romstage build/coreboot.pre*
> build/coreboot.bootblock build/coreboot.a
> rm -rf build/bootblock?* build/romstage?* build/location.*
> rm -f build/option_table.* build/crt0.S build/ldscript
> rm -f build/mainboard//static.c build/mainboard//config.py
> build/mainboard//static.dot
> rm -f build/mainboard//crt0.s build/mainboard//crt0.disasm
> rm -f build/mainboard//romstage.inc
> rm -f build/mainboard//bootblock.* build/dsdt.*
> rm -f build/cpu/x86/smm/smm_bin.c build/cpu/x86/smm/smm.*
> build/cpu/x86/smm/smm
> rm -rf build .xcompile
> make -C util/crossgcc all_without_gdb SKIP_CLANG=1
> make SKIP_GDB=1 build-i386 build-x64 build-arm build-mips \
>                 build-riscv build-aarch64 build-power8 build-nds32le \
>                 build_clang build_iasl build_make
> bash ./buildgcc -p i386-elf    \
>                          -d /home/user/Downloads/coreboot/
> util/crossgcc/xgcc
> Welcome to the coreboot cross toolchain builder v1.42 (August 11th, 2016)
>
> Target architecture is now i386-elf
> Downloading tarballs ...
> gmp-6.1.0.tar.xz (cached)
> mpfr-3.1.4.tar.xz (cached)
> mpc-1.0.3.tar.gz (cached)
> libelf-0.8.13.tar.gz (downloading from http://www.mr511.de/software/l
>
> ibelf-0.8.13.tar.gz) ..100%
> binutils-2.26.1.tar.bz2 (cached)
> gcc-5.3.0.tar.bz2 (cached)
>
> Downloaded tarballs ... ok
> Unpacking and patching ...
> libelf-0.8.13.tar.gz
>
> gzip: stdin: not in gzip format
> tar: Child returned status 1
> tar: Error is not recoverable: exiting now
> touch: cannot touch 'libelf-0.8.13/.unpack_success': No such file or
> directory
> make[3]: *** [build_gcc] Error 1
> make[2]: *** [build-i386] Error 2
> make[1]: *** [all_without_gdb] Error 2
> make: *** [crossgcc] Error 2