Coreboot is failing to build

[Ali H. Fardan]

Greetings,

Coreboot is failing to build after running 'make crossgcc'
this error occured when building libreboot too, could any-
one figure it out? Might be that the mirror of libelf is
outdated.

Raiz

user@user-ThinkPad-X200:~/Downloads/coreboot$ make crossgcc V=1
rm -rf doxygen
make -C payloads/coreinfo clean;   make -C payloads/nvramcui clean;   
make -C payloads/libpayload clean;   make -C 
payloads/external/depthcharge clean;   make -C payloads/external/SeaBIOS 
clean;   make -C payloads/external/U-Boot clean;   make -C 
payloads/external/Memtest86Plus clean;   make -C payloads/external/iPXE 
clean;   make -C payloads/external/tint clean;
rm -rf build/*.elf build/*.o .xcompile
rm -f nvramcui.elf
rm -rf doxygen
rm -f  build/libpayload.a
rm -f  .xcompile
rm -f
rmdir -p  2>/dev/null >/dev/null || true
rm -f .ccwrap junit_config junit_config.old
test -d 
/home/user/Downloads/coreboot/payloads/external/depthcharge/depthcharge/build 
&& rm -rf 
/home/user/Downloads/coreboot/payloads/external/depthcharge/depthcharge/build 
|| exit 0
test -d seabios/out && rm -rf seabios/out || exit 0
test -d u-boot && make -C u-boot clean || exit 0
test -d 
/home/user/Downloads/coreboot/payloads/external/Memtest86Plus/memtest86plus 
&& make -C 
/home/user/Downloads/coreboot/payloads/external/Memtest86Plus/memtest86plus 
clean || exit 0
test -d ipxe && make -C ipxe/src veryclean || exit 0
rm -f ipxe/ipxe.rom
test -d tint && make -C tint clean || exit 0
rm -f build/ramstage?* build/coreboot.romstage build/coreboot.pre* 
build/coreboot.bootblock build/coreboot.a
rm -rf build/bootblock?* build/romstage?* build/location.*
rm -f build/option_table.* build/crt0.S build/ldscript
rm -f build/mainboard//static.c build/mainboard//config.py 
build/mainboard//static.dot
rm -f build/mainboard//crt0.s build/mainboard//crt0.disasm
rm -f build/mainboard//romstage.inc
rm -f build/mainboard//bootblock.* build/dsdt.*
rm -f build/cpu/x86/smm/smm_bin.c build/cpu/x86/smm/smm.* 
build/cpu/x86/smm/smm
rm -rf build .xcompile
make -C util/crossgcc all_without_gdb SKIP_CLANG=1
make SKIP_GDB=1 build-i386 build-x64 build-arm build-mips \
    	build-riscv build-aarch64 build-power8 build-nds32le \
    	build_clang build_iasl build_make
bash ./buildgcc -p i386-elf    \
    		 -d /home/user/Downloads/coreboot/util/crossgcc/xgcc
Welcome to the coreboot cross toolchain builder v1.42 (August 11th, 
2016)

Target architecture is now i386-elf
Downloading tarballs ...
  * gmp-6.1.0.tar.xz (cached)
  * mpfr-3.1.4.tar.xz (cached)
  * mpc-1.0.3.tar.gz (cached)
  * libelf-0.8.13.tar.gz (downloading from 
http://www.mr511.de/software/libelf-0.8.13.tar.gz) ..100%
  * binutils-2.26.1.tar.bz2 (cached)
  * gcc-5.3.0.tar.bz2 (cached)
Downloaded tarballs ... ok
Unpacking and patching ...
  * libelf-0.8.13.tar.gz

gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
touch: cannot touch 'libelf-0.8.13/.unpack_success': No such file or 
directory
make[3]: *** [build_gcc] Error 1
make[2]: *** [build-i386] Error 2
make[1]: *** [all_without_gdb] Error 2
make: *** [crossgcc] Error 2

[Martin Roth]

Hi Ali,
  The build script seems to be working for me, so it might be your
network connection or your environment.  Currently we don't run the
checksum routine again after downloading the file.  We probably need
to do that.

My first thought is that it didn't download correctly for some reason.
If you try to build again, does it try to download the libelf tarball
again?  If so, it didn't get properly downloaded.  You might try
downloading it manually and putting it in the tarballs folder.

If that's not what's happening, it's probably something in your environment:
- What shell is being used? ls -al /bin/sh; /bin/sh --version
- What version of tar is getting run? tar --version
- If you're running a less widely used OS or Distro, what are you running?

Try running the buildgcc command directly with -x enabled and see
what's actually getting run for the tar command:
/bin/sh -x util/crossgcc/buildgcc

Martin

On Sun, Aug 14, 2016 at 2:12 AM, Ali H. Fardan  wrote:
> Greetings,
>
> Coreboot is failing to build after running 'make crossgcc'
> this error occured when building libreboot too, could any-
> one figure it out? Might be that the mirror of libelf is
> outdated.
>
> Raiz
>
> user@user-ThinkPad-X200:~/Downloads/coreboot$ make crossgcc V=1
> rm -rf doxygen
> make -C payloads/coreinfo clean;   make -C payloads/nvramcui clean;   make
> -C payloads/libpayload clean;   make -C payloads/external/depthcharge clean;
> make -C payloads/external/SeaBIOS clean;   make -C payloads/external/U-Boot
> clean;   make -C payloads/external/Memtest86Plus clean;   make -C
> payloads/external/iPXE clean;   make -C payloads/external/tint clean;
> rm -rf build/*.elf build/*.o .xcompile
> rm -f nvramcui.elf
> rm -rf doxygen
> rm -f  build/libpayload.a
> rm -f  .xcompile
> rm -f
> rmdir -p  2>/dev/null >/dev/null || true
> rm -f .ccwrap junit_config junit_config.old
> test -d
> /home/user/Downloads/coreboot/payloads/external/depthcharge/depthcharge/build
> && rm -rf
> /home/user/Downloads/coreboot/payloads/external/depthcharge/depthcharge/build
> || exit 0
> test -d seabios/out && rm -rf seabios/out || exit 0
> test -d u-boot && make -C u-boot clean || exit 0
> test -d
> /home/user/Downloads/coreboot/payloads/external/Memtest86Plus/memtest86plus
> && make -C
> /home/user/Downloads/coreboot/payloads/external/Memtest86Plus/memtest86plus
> clean || exit 0
> test -d ipxe && make -C ipxe/src veryclean || exit 0
> rm -f ipxe/ipxe.rom
> test -d tint && make -C tint clean || exit 0
> rm -f build/ramstage?* build/coreboot.romstage build/coreboot.pre*
> build/coreboot.bootblock build/coreboot.a
> rm -rf build/bootblock?* build/romstage?* build/location.*
> rm -f build/option_table.* build/crt0.S build/ldscript
> rm -f build/mainboard//static.c build/mainboard//config.py
> build/mainboard//static.dot
> rm -f build/mainboard//crt0.s build/mainboard//crt0.disasm
> rm -f build/mainboard//romstage.inc
> rm -f build/mainboard//bootblock.* build/dsdt.*
> rm -f build/cpu/x86/smm/smm_bin.c build/cpu/x86/smm/smm.*
> build/cpu/x86/smm/smm
> rm -rf build .xcompile
> make -C util/crossgcc all_without_gdb SKIP_CLANG=1
> make SKIP_GDB=1 build-i386 build-x64 build-arm build-mips \
>                 build-riscv build-aarch64 build-power8 build-nds32le \
>                 build_clang build_iasl build_make
> bash ./buildgcc -p i386-elf    \
>                          -d /home/user/Downloads/coreboot/util/crossgcc/xgcc
> Welcome to the coreboot cross toolchain builder v1.42 (August 11th, 2016)
>
> Target architecture is now i386-elf
> Downloading tarballs ...
> gmp-6.1.0.tar.xz (cached)
> mpfr-3.1.4.tar.xz (cached)
> mpc-1.0.3.tar.gz (cached)
> libelf-0.8.13.tar.gz (downloading from
>
> http://www.mr511.de/software/libelf-0.8.13.tar.gz) ..100%
> binutils-2.26.1.tar.bz2 (cached)
> gcc-5.3.0.tar.bz2 (cached)
>
> Downloaded tarballs ... ok
> Unpacking and patching ...
> libelf-0.8.13.tar.gz
>
> gzip: stdin: not in gzip format
> tar: Child returned status 1
> tar: Error is not recoverable: exiting now
> touch: cannot touch 'libelf-0.8.13/.unpack_success': No such file or
> directory
> make[3]: *** [build_gcc] Error 1
> make[2]: *** [build-i386] Error 2
> make[1]: *** [all_without_gdb] Error 2
> make: *** [crossgcc] Error 2

[Zoran Stojsavljevic]

> tar zxf tarballs/libelf-0.8.13.tar.gz

What about the following command: *$ tar -xf libelf-0.8.13.tar.gz *?
($ uname -a -> Linux localhost.localdomain *4.6.5-300.fc24.x86_64*)

Zoran

On Sun, Aug 14, 2016 at 10:12 AM, Ali H. Fardan  wrote:
> Greetings,
>
> Coreboot is failing to build after running 'make crossgcc'
> this error occured when building libreboot too, could any-
> one figure it out? Might be that the mirror of libelf is
> outdated.
>
> Raiz
>
> user@user-ThinkPad-X200:~/Downloads/coreboot$ make crossgcc V=1
> rm -rf doxygen
> make -C payloads/coreinfo clean;   make -C payloads/nvramcui clean;   make
> -C payloads/libpayload clean;   make -C payloads/external/depthcharge
> clean;   make -C payloads/external/SeaBIOS clean;   make -C
> payloads/external/U-Boot clean;   make -C payloads/external/Memtest86Plus
> clean;   make -C payloads/external/iPXE clean;   make -C
> payloads/external/tint clean;
> rm -rf build/*.elf build/*.o .xcompile
> rm -f nvramcui.elf
> rm -rf doxygen
> rm -f  build/libpayload.a
> rm -f  .xcompile
> rm -f
> rmdir -p  2>/dev/null >/dev/null || true
> rm -f .ccwrap junit_config junit_config.old
> test -d /home/user/Downloads/coreboot/payloads/external/depthcharge/depthcharge/build
> && rm -rf /home/user/Downloads/coreboot/payloads/external/depthcharge/depthcharge/build
> || exit 0
> test -d seabios/out && rm -rf seabios/out || exit 0
> test -d u-boot && make -C u-boot clean || exit 0
> test -d /home/user/Downloads/coreboot/payloads/external/Memtest86Plus/memtest86plus
> && make -C /home/user/Downloads/coreboot/payloads/external/Memtest86Plus/memtest86plus
> clean || exit 0
> test -d ipxe && make -C ipxe/src veryclean || exit 0
> rm -f ipxe/ipxe.rom
> test -d tint && make -C tint clean || exit 0
> rm -f build/ramstage?* build/coreboot.romstage build/coreboot.pre*
> build/coreboot.bootblock build/coreboot.a
> rm -rf build/bootblock?* build/romstage?* build/location.*
> rm -f build/option_table.* build/crt0.S build/ldscript
> rm -f build/mainboard//static.c build/mainboard//config.py
> build/mainboard//static.dot
> rm -f build/mainboard//crt0.s build/mainboard//crt0.disasm
> rm -f build/mainboard//romstage.inc
> rm -f build/mainboard//bootblock.* build/dsdt.*
> rm -f build/cpu/x86/smm/smm_bin.c build/cpu/x86/smm/smm.*
> build/cpu/x86/smm/smm
> rm -rf build .xcompile
> make -C util/crossgcc all_without_gdb SKIP_CLANG=1
> make SKIP_GDB=1 build-i386 build-x64 build-arm build-mips \
>                 build-riscv build-aarch64 build-power8 build-nds32le \
>                 build_clang build_iasl build_make
> bash ./buildgcc -p i386-elf    \
>                          -d /home/user/Downloads/coreboot/
> util/crossgcc/xgcc
> Welcome to the coreboot cross toolchain builder v1.42 (August 11th, 2016)
>
> Target architecture is now i386-elf
> Downloading tarballs ...
> gmp-6.1.0.tar.xz (cached)
> mpfr-3.1.4.tar.xz (cached)
> mpc-1.0.3.tar.gz (cached)
> libelf-0.8.13.tar.gz (downloading from http://www.mr511.de/software/l
>
> ibelf-0.8.13.tar.gz) ..100%
> binutils-2.26.1.tar.bz2 (cached)
> gcc-5.3.0.tar.bz2 (cached)
>
> Downloaded tarballs ... ok
> Unpacking and patching ...
> libelf-0.8.13.tar.gz
>
> gzip: stdin: not in gzip format
> tar: Child returned status 1
> tar: Error is not recoverable: exiting now
> touch: cannot touch 'libelf-0.8.13/.unpack_success': No such file or
> directory
> make[3]: *** [build_gcc] Error 1
> make[2]: *** [build-i386] Error 2
> make[1]: *** [all_without_gdb] Error 2
> make: *** [crossgcc] Error 2