Re: [coreboot] [v2] r4925 makes my linux hang

[Bao, Zheng]

Now my VGA BIOS seems to run incorrectly.

Without_entry.txt:
The output of image running with Config.lb like,
chip southbridge/amd/rs780
    device pci 0.0 on end # HT  	0x9600
    device pci 1.0 on end # Internal Graphics P2P bridge 0x9602

With_entry.txt:
The output of image running with Config.lib like
 chip southbridge/amd/rs780
    device pci 0.0 on  # HT  	0x9600
               device pci 5.0 on end
    end
    device pci 1.0 on end # Internal Graphics P2P bridge 0x9602

That only happens when the CPU is K8. When the cpu is fam10, VGA runs
ok.
Any advice?

Zheng

-----Original Message-----
From: Myles Watson [mailto:[e-mail]] 
Sent: Saturday, November 14, 2009 12:34 AM
To: Bao, Zheng; 'Stefan Reinauer'
Cc: 'Marc Jones'; [e-mail]
Subject: RE: [coreboot] [v2] r4925 makes my linux hang
> Other boards like 690/600 need to modify, don't they?

I don't have any boards with those chipsets.  I thought you said the
dbm690t
was fine, but I don't know for sure.

Thanks,
Myles