[coreboot] Re: coreboot image forIntel Harcuvar CRB

[Tirumalesh]

Thanks for the suggestion I will try that.
If you can point me to your fixes I can try them in harcuvar and let you know.

Thanks,
Tirumalesh

On Fri, Feb 5, 2021 at 1:43 AM, Julien Viard de Galbert  wrote:
> Hi,
>
> You should probably try an older version of coreboot, close to when the
> harcuvar board was introduced and check if that version outputs anything
> on UART.
> I did that on a custom board using denverton recently and already
> proposed a few fix, but I don't have an harcuvar board to test.
>
> Hope this helps,
>
> Julien
> On Tue, Feb 02, 2021 at 08:27:03AM +0000, Tirumalesh wrote:
> > Hi,
> >
> > I also tried
> > config_intel_harcuvar config
> > Built complete image with Intel flash image tool
> >
> > Still not able to see anything on UART. Please some one help with some pointers here.
> >
> > Thanks,
> > Tirumalesh.
> > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > On Monday, February 1, 2021 12:02 PM, Tirumalesh via coreboot  wrote:
> > > Hi,
> > >
> > > I am trying to boot Coreboot on Intel Harcuvar CRB.
> > >
> > > The steps I tried
> > > -> make menuconfig
> > > selected Intel->Harcuvar
> > > ->make (got coreboot.rom 16MB)
> > >
> > > -> split –b 8M –a 1 –d coreboot.rom coreboot
> > > with dediprog programmed last 8M with coreboot1 (file generated with Split)
> > >
> > > Not able to see any output on UART. please let me know if Sam missing any configs/steps here.
> > > Any help is greatly appreciated.
> > >
> > > Thanks,
> > > Tirumalesh.
> > coreboot mailing list -- [e-mail]
> > To unsubscribe send an email to [e-mail]
>
> coreboot mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]