Please send me the full log archive so I can reproduce. Also note: X1 carbon has soldered RAM which will need adjustements
Le Sun, Dec 13, 2015 à 10:59 PM, Gerhard Gappmeier gappy1502@gmx.net a écrit :
Hi all,
unfortunately autoport didn't work well.
This is the output on the 1st run:
Unsupported PCI device 8086:1e56
Unknown PCI device 8086:0085, assuming removable
panic: runtime error: invalid memory address or nil pointer dereference
[signal 0xb code=0x1 addr=0x20 pc=0x40a157]
goroutine 1 [running]:
main.LenovoEC(0xc20801edc0, 0x19, 0xc20801eec0, 0x1f, 0xc20804638f, 0x6, 0xc20804640a, 0x12, 0xc20803d9e0, 0x2d, ...)
/home/gergap/work/opensource/coreboot/util/autoport/ec_lenovo.go:20 +0x1d37
main.ScanRoot(0xc20801edc0, 0x19, 0xc20801eec0, 0x1f, 0xc20804638f, 0x6, 0xc20804640a, 0x12, 0xc20803d9e0, 0x2d, ...)
/home/gergap/work/opensource/coreboot/util/autoport/root.go:33 +0x52a
main.main()
/home/gergap/work/opensource/coreboot/util/autoport/main.go:727 +0x683
On further runs the system freezes.
To fix the tree again I run
sudo -R gergap .
git clean -fdx
git reset --hard
This way I could reproduce the above output.
The created log files can be found here:
https://www.dropbox.com/s/1r2dvbk7rj68fuv/logs.tar.gz?dl=0
The created mainboard folder is not really useful,
but if you are interested here is the patch:
https://www.dropbox.com/s/2ejds3ppae0y5md/0001-Add-lenovo-thinkpad_x1_carbon...
Any help is appreciated.
On Sunday, December 13, 2015 07:52:31 PM you wrote:
Try util/autoport and it can be easier.
--
mfg,
Gerhard Gappmeier
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot