Re: [LinuxBIOS] Epia-M compilation fails

[Bu Bacoo]

On a Fedora box with gcc-3.4.4 I 've succeed. Goin' to check other gcc on
that gentoo box...

Bu

On 10/8/05, Bu Bacoo  wrote:
> No, it doesn't help. I checked your list of targets and there epia-m looks
> to compile fine. Clean dir, I did:
>
> svn co svn://openbios.org/repos/trunk/LinuxBIOSv2
> ....
> Checked out revision 2051.
>
> cd /home/bubak/epia/bios/LinuxBIOSv2/targets
> ./buildtarget via/epia-m/Config.lb > build.txt 2> build2.txt
> cd via/epia-m/epia-m/
> make > make.txt 2> make2.txt
>
> Outputs are attached. Same VGA problems
>
> After this, I've run yours ./test-build-all.sh. Very same output for
> via-epia-m. And it doesn't look to me, that it uses some external libs
> regarding VGA support, does it?
>
> Btw, ehn I checked the build-all log, much less targets were build, then
> on your side :-(
> (logs are attached)
>
> Any ideas?
>
> Thanks, Bu
>
> gcc --version
> gcc (GCC) 3.3.6 (Gentoo 3.3.6, ssp-3.3.6-1.0, pie-8.7.8)
>
> glibc 2.3.5-r1
>
> On 10/8/05, Jonathan McDowell  wrote:
> > On Fri, Oct 07, 2005 at 10:37:43PM +0200, Bu Bacoo wrote:
> > > After preparing epia-m build ( ./buildtarget via/epia-m/ ), I move to
> > > via/epia-m/epia-m and run 'make'. I get this error during linkage:
> > >
> > > .... cut.....
> > > gcc -m32 -nostdlib -r -o linuxbios_ram.o c_start.o vt8235_lpc.o
> > > uart8250_console.o vt8235.o vt8235_ide.o mainboard.o vt8235_usb.o
> > > vt8235_nic.o model_centaur_init.o
> > > linuxbios.a /usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.6/libgcc.a
> > > gcc -m32 -nostdlib -nostartfiles -static -o linuxbios_ram -T
> > > /home/bubak/epia/bios/LinuxBIOSv2/src/config/linuxbios_ram.ld
> > > linuxbios_ram.o
> > > linuxbios_ram.o(.text+0x8bc): In function `vga_fixup':
> > > : undefined reference to `setup_realmode_idt'
> > > linuxbios_ram.o(.text+0x8cd): In function `vga_fixup':
> > > : undefined reference to `do_vgabios'
> > > linuxbios_ram.o(.text+0x8e0): In function `vga_fixup':
> > > : undefined reference to `vga_enable_console'
> > > collect2: ld returned 1 exit status
> > > make[1]: *** [linuxbios_ram] Error 1
> > > make[1]: Leaving directory
> > > `/home/bubak/epia/bios/LinuxBIOSv2/targets/via/epia-m/epia-m/normal'
> > > make: *** [normal/linuxbios.rom] Error 1
> > >
> > > Any ideas please?
> >
> > The VGA support won't compile; does "./buildtarget via/epia-m/Config.lb"
> > get any further for you?
> >
> > I'm still periodically updating the list of targets that build with a
> > default SVN checkout at:
> >
> > http://the.earth.li/~noodles/lb/ http://the.earth.li/%7Enoodles/lb/
> >
> > J.