On a Fedora box with gcc-3.4.4 I 've succeed. Goin' to check other gcc on that gentoo box...

Bu

On 10/8/05, Bu Bacoo <bubacoo@gmail.com> wrote:
No, it doesn't help. I checked your list of targets and there epia-m looks to compile fine. Clean dir, I did:

svn co svn://openbios.org/repos/trunk/LinuxBIOSv2
....
Checked out revision 2051.

cd /home/bubak/epia/bios/LinuxBIOSv2/targets
./buildtarget via/epia-m/Config.lb > build.txt 2> build2.txt
cd via/epia-m/epia-m/
make > make.txt 2> make2.txt

Outputs are attached. Same VGA problems

After this, I've run yours ./test-build-all.sh. Very same output for via-epia-m. And it doesn't look to me, that it uses some external libs regarding VGA support, does it?

Btw, ehn I checked the build-all log, much less targets were build, then on your side :-(
(logs are attached)

Any ideas?


Thanks, Bu


gcc --version
gcc (GCC) 3.3.6 (Gentoo 3.3.6, ssp-3.3.6-1.0, pie-8.7.8)

glibc 2.3.5-r1




On 10/8/05, Jonathan McDowell <noodles@earth.li > wrote:
On Fri, Oct 07, 2005 at 10:37:43PM +0200, Bu Bacoo wrote:
> After preparing epia-m build ( ./buildtarget via/epia-m/ ), I move to
> via/epia-m/epia-m and run 'make'. I get this error during linkage:
>
> .... cut.....
> gcc -m32 -nostdlib -r -o linuxbios_ram.o c_start.o vt8235_lpc.o
> uart8250_console.o vt8235.o vt8235_ide.o mainboard.o vt8235_usb.o
> vt8235_nic.o model_centaur_init.o
> linuxbios.a /usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.6/libgcc.a
> gcc -m32 -nostdlib -nostartfiles -static -o linuxbios_ram -T
> /home/bubak/epia/bios/LinuxBIOSv2/src/config/linuxbios_ram.ld
> linuxbios_ram.o
> linuxbios_ram.o(.text+0x8bc): In function `vga_fixup':
> : undefined reference to `setup_realmode_idt'
> linuxbios_ram.o(.text+0x8cd): In function `vga_fixup':
> : undefined reference to `do_vgabios'
> linuxbios_ram.o(.text+0x8e0): In function `vga_fixup':
> : undefined reference to `vga_enable_console'
> collect2: ld returned 1 exit status
> make[1]: *** [linuxbios_ram] Error 1
> make[1]: Leaving directory
> `/home/bubak/epia/bios/LinuxBIOSv2/targets/via/epia-m/epia-m/normal'
> make: *** [normal/linuxbios.rom] Error 1
>
> Any ideas please?

The VGA support won't compile; does "./buildtarget via/epia-m/Config.lb"
get any further for you?

I'm still periodically updating the list of targets that build with a
default SVN checkout at:

http://the.earth.li/~noodles/lb/

J.

--
[    Graduate of the Darth Vader School of Personnel Management.     ]

--
LinuxBIOS mailing list
LinuxBIOS@openbios.org
http://www.openbios.org/mailman/listinfo/linuxbios