To begin with the system didn't find memory attached... but there is memory attached, SPD address mismatch? I will check. .... .......Timeout while sending command 0x0d to EC! recv_ec_data: 0xff recv_ec_data: 0xff SPD index 7 No memory dimm at address A0 No memory dimm at address A2 No memory dimm at address A6 .... 0 DIMMs found ....
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Wednesday, 12 September 2018 13:29, Jose Trujillo via coreboot coreboot@coreboot.org wrote:
Dear coreboot engineers:
Right now I am stuck with a Kabylake system with the following message: .... CPU #1 initialized apic_id: 0x06 done. microcode: updated to revision 0x8d date=2018-01-21 CPU #3 initialized bsp_do_flight_plan done after 220 msecs. CPU: frequency set to 3600 MHz Enabling SMIs. Locking SMM. VMX : param.enable = 0 VMX: pre-conditions not met SGX: pre-conditions not met VMX: pre-conditions not met VMX: pre-conditions not met SGX: pre-conditions not met SGX: pre-conditions not met VMX: pre-conditions not met SGX: pre-conditions not met POST: 0x71 ....
May be some configuration is missing and I am trying to find this out myself but if someone of you can give a hint on how to resolve it I will be grateful.
Attached is the full serial dump.
Thank you, Jose Trujillo