To begin with the system didn't find memory attached...
but there is memory attached, SPD address mismatch? I will check.
....
.......Timeout while sending command 0x0d to EC!
recv_ec_data: 0xff
recv_ec_data: 0xff
SPD index 7
No memory dimm at address A0
No memory dimm at address A2
No memory dimm at address A6
....
0 DIMMs found
....
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Wednesday, 12 September 2018 13:29, Jose Trujillo via coreboot <coreboot@coreboot.org> wrote:
Dear coreboot engineers:
Right now I am stuck with a Kabylake system with the following message:
....
CPU #1 initialized
apic_id: 0x06 done.
microcode: updated to revision 0x8d date=2018-01-21
CPU #3 initialized
bsp_do_flight_plan done after 220 msecs.
CPU: frequency set to 3600 MHz
Enabling SMIs.
Locking SMM.
VMX : param.enable = 0
VMX: pre-conditions not met
SGX: pre-conditions not met
VMX: pre-conditions not met
VMX: pre-conditions not met
SGX: pre-conditions not met
SGX: pre-conditions not met
VMX: pre-conditions not met
SGX: pre-conditions not met
POST: 0x71
....
May be some configuration is missing and I am trying to find this out myself but if someone of you can give a hint on how to resolve it I will be grateful.
Attached is the full serial dump.
Thank you,
Jose Trujillo