Hi,
You should probably try an older version of coreboot, close to when the harcuvar board was introduced and check if that version outputs anything on UART. I did that on a custom board using denverton recently and already proposed a few fix, but I don't have an harcuvar board to test.
Hope this helps,
Julien On Tue, Feb 02, 2021 at 08:27:03AM +0000, Tirumalesh wrote:
Hi,
I also tried
- config_intel_harcuvar config
- Built complete image with Intel flash image tool
Still not able to see anything on UART. Please some one help with some pointers here.
Thanks, Tirumalesh. ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Monday, February 1, 2021 12:02 PM, Tirumalesh via coreboot coreboot@coreboot.org wrote:
Hi,
I am trying to boot Coreboot on Intel Harcuvar CRB.
The steps I tried -> make menuconfig selected Intel->Harcuvar ->make (got coreboot.rom 16MB)
-> split –b 8M –a 1 –d coreboot.rom coreboot with dediprog programmed last 8M with coreboot1 (file generated with Split)
Not able to see any output on UART. please let me know if Sam missing any configs/steps here. Any help is greatly appreciated.
Thanks, Tirumalesh.
coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org