-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi!
I added debug statements (http://pastebin.com/iSFstXmv) and realized that the calculated checksum is 0..
CLC_CRC : 0 SPD_CRC : ce66
Furthermore I had a look at src/device/dram/ddr3.c line 155 - The capacity is given with 4GB (as you see in the log) but the dram_print_spd_ddr3 output from dimm->size_mb is 8192MB O_o
The first log was from a quite out-dated build - I reseted on 4679c41db292b80ce51c7d923e2f22258145522b..
- -> http://pastebin.com/Xxq0Lwyp
Best regards,
n3ph
On 05/20/15 21:03, Timothy Pearson wrote:
On 05/20/2015 12:46 PM, Michael Gerlach wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
I guess this check is done by Lenovo BIOS in a different way? Because this board+ram has no problems booting with vendor BIOS...
Unfortunately I do not have any other DDR3 modules to test.
Best regards,
n3ph
It is possible the vendor BIOS ignores the checksum. Is there any way to get a dump of the SPD contents while running Linux (e.g. via decode-dimms)?
- -- Bitte benutzt GPG: http://de.wikipedia.org/wiki/GNU_Privacy_Guard