Rudolf Marek escribió:
Hi,
Try experimenting with the position of used memory slots. Maybe you just need to put DIMMS into right places ;) I think I used the slot closest to CPU then one empty and then the second DIM and then the closest to edge empty.
Rudolf
Hello,
yes switching memory slots to "CPU yes no yes no" worked perfectly. Now I'm stucked with dev_enumeration more precisely scan_bus fails with a malloc error. I already had this error with PCI: 00:10.1 - 00:10.4 (the USB) I disabled them in the device tree with /device pci 10.1 off end /but now it fails again and i can't just disable the whole PCI bus 2 since the VGA is on it.
PCI: 01:1d.0, bad id 0xffffffff PCI: 01:1e.0, bad id 0xffffffff PCI: 01:1f.0, bad id 0xffffffff POST: 0x25 PCI: pci_scan_bus returning with max=001 POST: 0x55 do_pci_scan_bridge returns max 1 do_pci_scan_bridge for PCI: 00:02.0 PCI: pci_scan_bus for bus 02 POST: 0x24 malloc Enter, size 1092, free_mem_ptr 0014bffc Error! malloc: Out of memory (free_mem_ptr >= free_mem_end_ptr)POST: 0xff
Thanks again, without the maillist i would be lost! :)