Rudolf Marek escribió:

Hi,

Try experimenting with the position of used memory slots. Maybe you just need to
put DIMMS into right places ;) I think I used the slot closest to CPU then one
empty and then the second DIM and then the closest to edge empty.

Rudolf

Hello,

yes switching memory slots to "CPU yes no yes no" worked perfectly. Now I'm stucked with dev_enumeration more precisely scan_bus fails with a malloc error. I already had this error with PCI: 00:10.1 - 00:10.4 (the USB) I disabled them in the device tree with device pci 10.1 off end but now it fails again and i can't just disable the whole PCI bus 2 since the VGA is on it.

PCI: 01:1d.0, bad id 0xffffffff
PCI: 01:1e.0, bad id 0xffffffff
PCI: 01:1f.0, bad id 0xffffffff
POST: 0x25
PCI: pci_scan_bus returning with max=001
POST: 0x55
do_pci_scan_bridge returns max 1
do_pci_scan_bridge for PCI: 00:02.0
PCI: pci_scan_bus for bus 02
POST: 0x24
malloc Enter, size 1092, free_mem_ptr 0014bffc
Error! malloc: Out of memory (free_mem_ptr >= free_mem_end_ptr)POST: 0xff

Thanks again, without the maillist i would be lost! :)