Hi,
When i launch memtest all are ok (it recognize the memory area as reported into table at 0x0530). If i launch a kernel (see later) the system restart.
Any help ??
Linuxbios V2 report this memory map area
Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-88) Type: WB DONE fixed MTRRs call enable_fixed_mtrr() Setting variable MTRR 0, base: 0MB, range: 128MB, type WB ADDRESS_MASK_HIGH=0xf DONE variable MTRRs Clear out the extra MTRR's call enable_var_mtrr() Leave x86_setup_var_mtrrs
Ram areas [0x0000000000000000, 0x0000000000001000) Reserved [0x0000000000001000, 0x00000000000a0000) RAM [0x00000000000a0000, 0x00000000000c0000) Reserved [0x00000000000c0000, 0x00000000000f0000) Reserved [0x00000000000f0000, 0x0000000000100000) Reserved [0x0000000000100000, 0x0000000008000000) RAM
Filo 0.5 report this
collect_linuxbios_info: Searching for LinuxBIOS tables... find_lb_table: Found candidate at: 00000530 find_lb_table: header checksum o.k. find_lb_table: table checksum o.k. find_lb_table: record count o.k. collect_linuxbios_info: Found LinuxBIOS table at: 00000530 convert_memmap: 0x00000000000000 0x00000000001000 16 convert_memmap: 0x00000000001000 0x0000000009f000 1 convert_memmap: 0x000000000a0000 0x00000000020000 2 convert_memmap: 0x000000000c0000 0x00000000030000 2 convert_memmap: 0x000000000f0000 0x00000000010000 16 convert_memmap: 0x00000000100000 0x00000007f00000 1 collect_sys_info: 0000000000001000-00000000000a0000 collect_sys_info: 0000000000100000-0000000008000000 collect_sys_info: RAM 128 MB
Filo Report This:
Booting 'hda1:/boot/vmlinuz-2.6.20 root=/dev/hda1 console=ttyS0' malloc_diag: alloc: 272 bytes (4 blocks), free: 16104 bytes (1 blocks) malloc_diag: alloc: 288 bytes (5 blocks), free: 16088 bytes (1 blocks) file_open: dev=hda1, path=/boot/vmlinuz-2.6.20 devopen: Partition 1 start 62 length 62620 Mounted ext2fs malloc_diag: alloc: 272 bytes (4 blocks), free: 16104 bytes (1 blocks) elf_load: Not a bootable ELF image malloc_diag: alloc: 288 bytes (5 blocks), free: 16088 bytes (1 blocks) file_open: dev=hda1, path=/boot/vmlinuz-2.6.20 devopen: already open malloc_diag: alloc: 272 bytes (4 blocks), free: 16104 bytes (1 blocks) Found Linux version 2.6.20 (bellard@voyager.localdomain) #2 SMP Sun Feb 11 19:54 :51 CET 2007 (protocol 0x205) (loadflags 0x1) bzImage. init_linux_params: Setting up paramters at 0x90000 set_memory_size: 0000000000001000 - 00000000000a0000 set_memory_size: 0000000000100000 - 0000000008000000 set_memory_size: ramtop=0x8000000 set_memory_size: ext_mem_k=64512, alt_mem_k=130048 parse_command_line: original command line: "root=/dev/hda1 console=ttyS0" parse_command_line: kernel command line at 0x91000 parse_command_line: kernel command line (28 bytes): "root=/dev/hda1 console=ttyS 0" load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1f038c Loading kernel... ok start_linux: eip=0x100000 Jumping to entry point... 0