Hi,
When i launch memtest all are ok (it recognize the
memory area as reported into table at 0x0530). If i launch a kernel (see later)
the system restart.
Any help ??
Linuxbios V2 report this memory map
area
Setting fixed MTRRs(0-88) type: UC
Setting fixed
MTRRs(0-88) Type: WB
DONE fixed MTRRs
call enable_fixed_mtrr()
Setting
variable MTRR 0, base: 0MB, range: 128MB, type
WB
ADDRESS_MASK_HIGH=0xf
DONE variable MTRRs
Clear out the extra
MTRR's
call enable_var_mtrr()
Leave x86_setup_var_mtrrs
Ram areas
[0x0000000000000000,
0x0000000000001000) Reserved
[0x0000000000001000, 0x00000000000a0000)
RAM
[0x00000000000a0000, 0x00000000000c0000) Reserved
[0x00000000000c0000, 0x00000000000f0000) Reserved
[0x00000000000f0000,
0x0000000000100000) Reserved
[0x0000000000100000, 0x0000000008000000)
RAM
Filo 0.5 report this
collect_linuxbios_info: Searching for LinuxBIOS
tables...
find_lb_table: Found candidate at: 00000530
find_lb_table:
header checksum o.k.
find_lb_table: table checksum o.k.
find_lb_table:
record count o.k.
collect_linuxbios_info: Found LinuxBIOS table at:
00000530
convert_memmap: 0x00000000000000 0x00000000001000
16
convert_memmap: 0x00000000001000 0x0000000009f000 1
convert_memmap:
0x000000000a0000 0x00000000020000 2
convert_memmap: 0x000000000c0000
0x00000000030000 2
convert_memmap: 0x000000000f0000 0x00000000010000
16
convert_memmap: 0x00000000100000 0x00000007f00000 1
collect_sys_info:
0000000000001000-00000000000a0000
collect_sys_info:
0000000000100000-0000000008000000
collect_sys_info: RAM 128 MB
Filo Report This:
Booting 'hda1:/boot/vmlinuz-2.6.20 root=/dev/hda1
console=ttyS0'
malloc_diag: alloc: 272 bytes (4 blocks), free: 16104 bytes (1
blocks)
malloc_diag: alloc: 288 bytes (5 blocks), free: 16088 bytes (1
blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.20
devopen: Partition
1 start 62 length 62620
Mounted ext2fs
malloc_diag: alloc: 272 bytes (4
blocks), free: 16104 bytes (1 blocks)
elf_load: Not a bootable ELF
image
malloc_diag: alloc: 288 bytes (5 blocks), free: 16088 bytes (1
blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.20
devopen: already
open
malloc_diag: alloc: 272 bytes (4 blocks), free: 16104 bytes (1
blocks)
Found Linux version 2.6.20 (bellard@voyager.localdomain) #2
SMP Sun Feb 11 19:54
:51 CET 2007 (protocol 0x205) (loadflags 0x1)
bzImage.
init_linux_params: Setting up paramters at
0x90000
set_memory_size: 0000000000001000 -
00000000000a0000
set_memory_size: 0000000000100000 -
0000000008000000
set_memory_size: ramtop=0x8000000
set_memory_size:
ext_mem_k=64512, alt_mem_k=130048
parse_command_line: original command line:
"root=/dev/hda1 console=ttyS0"
parse_command_line: kernel command line at
0x91000
parse_command_line: kernel command line (28 bytes): "root=/dev/hda1
console=ttyS
0"
load_linux_kernel: offset=0x1e00 addr=0x100000
size=0x1f038c
Loading kernel... ok
start_linux: eip=0x100000
Jumping to
entry point...
0