System BIOS or LinuxBIOS?
Did you base the code in the tree?
YH
-----Original Message----- From: linuxbios-bounces@linuxbios.org [mailto:linuxbios-bounces@linuxbios.org] On Behalf Of Jia Jianwei Sent: Thursday, March 30, 2006 12:36 PM To: linuxbios@linuxbios.org Subject: [LinuxBIOS] broadcom HT1000 SATA PHY initializing
I'm porting BIOS on a AMD opteron system with broadcom HT2000 and HT1000 chipset. I meet a problem when initilizing SATA device of HT1000. The SATA PHY status(0x40)always return a disable status(04), whatever I did with the PHY reset ( set 0x48 bit 0 and clear it ). Can anyone give me some advices? Thanks in advance!
Best Regards, Jianwei
*** Disclaimer: This message may contain privileged and/or confidential information. If you have received this e-mail in error or are not the intended recipient, you may not use, copy, disseminate or distribute it; do not open any attachments, delete it immediately from your system and notify the sender promptly by e-mail that you have done so. Thank you. ***