Hi Marc,
On 03.11.2008 22:21, Marc Jones wrote:
Carl-Daniel Hailfinger wrote:
Hi Marc,
maybe you can shed some light on the problem below.
Basically, the K8 reports in lspci that it supports HT 1.02, but the BKDG says it uses HT 1.03. And HT 1.03 is the first publicly available spec.
I am not sure why you are blowing this out of proportion.
I'm very sorry if my questions gave that impression.
It is a warning. It isn't a problem. If you examine the freely available K8 BKDG, you will find that registers in the K8 match the 1.03 revision of the spec.
Thanks for confirming this.
Thus, the settings read by lspci are decoded correctly.
Actually, the settings decoded by lspci are incomplete because of the version mismatch. I'll send a patch to lspci maintainers with a workaround.
Regards, Carl-Daniel