I'm trying to get ADLO up but once it jumps to adlo nothing happens.
I've applied the serial-debug patch to ADLO but still no results.
Are there any specific memory region options that I need to have enabled /disabled?
Heres the snipit from my serial output.
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.2
Using stream address 0x9c00 37:init_bytes() - zkernel_start:0xfff00000 zkernel_mask:0x0000ffff Found ELF candiate at offset 0 New segment addr 0x7c00 size 0x20400 offset 0x100 filesize 0x20400 (cleaned up) New segment addr 0x7c00 size 0x20400 offset 0x100 filesize 0x20400 Loading Segment: addr: 0x0000000007f67368 memsz: 0x0000000000020400 filesz: 0x0000000000020400 Jumping to boot code at 0x7c00
<machine is toast at this point>