did you set registers that control shadow ram right? (at loader.s)
On Wed, 30 Apr 2003, Richard Smith wrote:
I'm trying to get ADLO up but once it jumps to
adlo nothing happens.
I've applied the serial-debug patch to ADLO but still no results.
Are there any specific memory region options that I need to have enabled
Heres the snipit from my serial output.
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Using stream address 0x9c00
37:init_bytes() - zkernel_start:0xfff00000 zkernel_mask:0x0000ffff
Found ELF candiate at offset 0
New segment addr 0x7c00 size 0x20400 offset 0x100 filesize 0x20400
(cleaned up) New segment addr 0x7c00 size 0x20400 offset 0x100 filesize
Loading Segment: addr: 0x0000000007f67368 memsz: 0x0000000000020400
Jumping to boot code at 0x7c00
<machine is toast at this point>
The Supreme Headquarters of the 32 bit registers