Author: stepan
Date: 2010-01-16 18:53:38 +0100 (Sat, 16 Jan 2010)
New Revision: 5022
Modified:
trunk/src/arch/i386/include/arch/io.h
trunk/src/arch/i386/include/arch/romcc_io.h
trunk/src/arch/i386/lib/console.c
trunk/src/arch/i386/lib/printk_init.c
trunk/src/lib/usbdebug_direct.c
trunk/src/mainboard/amd/db800/cache_as_ram_auto.c
trunk/src/mainboard/artecgroup/dbe61/cache_as_ram_auto.c
trunk/src/mainboard/digitallogic/msm800sev/cache_as_ram_auto.c
trunk/src/mainboard/iei/pcisa-lx-800-r10/cache_as_ram_auto.c
trunk/src/mainboard/intel/eagleheights/auto.c
trunk/src/mainboard/intel/eagleheights/mptable.c
trunk/src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c
trunk/src/mainboard/lippert/spacerunner-lx/cache_as_ram_auto.c
trunk/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c
trunk/src/northbridge/amd/gx1/northbridge.c
trunk/src/northbridge/amd/gx1/raminit.c
trunk/src/southbridge/amd/amd8111/amd8111_nic.c
trunk/src/southbridge/amd/cs5530/cs5530_vga.c
trunk/src/southbridge/amd/cs5536/cs5536.c
trunk/src/southbridge/amd/sb600/sb600_hda.c
trunk/src/southbridge/amd/sb600/sb600_sata.c
trunk/src/southbridge/amd/sb600/sb600_usb.c
trunk/src/southbridge/broadcom/bcm5785/bcm5785_sata.c
trunk/src/southbridge/intel/i82801gx/i82801gx_azalia.c
trunk/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c
trunk/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c
trunk/src/southbridge/nvidia/ck804/ck804_nic.c
trunk/src/southbridge/nvidia/mcp55/mcp55_aza.c
trunk/src/southbridge/nvidia/mcp55/mcp55_nic.c
trunk/src/southbridge/sis/sis966/sis966_aza.c
trunk/src/southbridge/sis/sis966/sis966_nic.c
trunk/src/southbridge/sis/sis966/sis966_usb2.c
Log:
coreboot used to have two different "APIs" for memory accesses:
read32(unsigned long addr) vs readl(void *addr)
and
write32(unsigned long addr, uint32_t value) vs writel(uint32_t value, void *addr)
read32 was only available in __PRE_RAM__ stage, while readl was used in stage2.
Some unclean implementations then made readl available to __PRE_RAM__ too which
results in really messy includes and code.
This patch fixes all code to use the read32/write32 variant, so that we can
remove readl/writel in another patch.
Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de>
Acked-by: Ronald G. Minnich <rminnich(a)gmail.com>
Modified: trunk/src/arch/i386/include/arch/io.h
===================================================================
--- trunk/src/arch/i386/include/arch/io.h 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/arch/i386/include/arch/io.h 2010-01-16 17:53:38 UTC (rev 5022)
@@ -136,6 +136,14 @@
);
}
+/* XXX XXX XXX This is a story from the evil API from hell XXX XXX XXX
+ * We have different functions for memory access in pre-ram stage and ram
+ * stage. Those in pre-ram stage are called write32 and expect the address
+ * first and the address as a pointer type. Those in ram stage are called
+ * writel and expect the datum first and the address as an integer type.
+ * Until all code is checked and fixed, I'll add both versions here now.
+ */
+
static inline void writeb(uint8_t b, volatile void *addr)
{
*(volatile uint8_t *) addr = b;
@@ -166,5 +174,37 @@
return *(volatile uint32_t *) addr;
}
+#if !defined(__PRE_RAM__)
+static inline __attribute__((always_inline)) uint8_t read8(unsigned long addr)
+{
+ return *((volatile uint8_t *)(addr));
+}
+
+static inline __attribute__((always_inline)) uint16_t read16(unsigned long addr)
+{
+ return *((volatile uint16_t *)(addr));
+}
+
+static inline __attribute__((always_inline)) uint32_t read32(unsigned long addr)
+{
+ return *((volatile uint32_t *)(addr));
+}
+
+static inline __attribute__((always_inline)) void write8(unsigned long addr, uint8_t value)
+{
+ *((volatile uint8_t *)(addr)) = value;
+}
+
+static inline __attribute__((always_inline)) void write16(unsigned long addr, uint16_t value)
+{
+ *((volatile uint16_t *)(addr)) = value;
+}
+
+static inline __attribute__((always_inline)) void write32(unsigned long addr, uint32_t value)
+{
+ *((volatile uint32_t *)(addr)) = value;
+}
#endif
+#endif
+
Modified: trunk/src/arch/i386/include/arch/romcc_io.h
===================================================================
--- trunk/src/arch/i386/include/arch/romcc_io.h 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/arch/i386/include/arch/romcc_io.h 2010-01-16 17:53:38 UTC (rev 5022)
@@ -3,7 +3,7 @@
#include <stdint.h>
-
+#ifdef __PRE_RAM__
static inline __attribute__((always_inline)) uint8_t read8(unsigned long addr)
{
return *((volatile uint8_t *)(addr));
@@ -33,6 +33,7 @@
{
*((volatile uint32_t *)(addr)) = value;
}
+#endif
#if CONFIG_MMCONF_SUPPORT
Modified: trunk/src/arch/i386/lib/console.c
===================================================================
--- trunk/src/arch/i386/lib/console.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/arch/i386/lib/console.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -10,7 +10,7 @@
#define COREBOOT_EXTRA_VERSION ""
#endif
-static void console_init(void)
+void console_init(void)
{
static const char console_test[] =
"\r\n\r\ncoreboot-"
Modified: trunk/src/arch/i386/lib/printk_init.c
===================================================================
--- trunk/src/arch/i386/lib/printk_init.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/arch/i386/lib/printk_init.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -18,6 +18,7 @@
*/
#include <stdarg.h>
+#include <console/console.h>
#include <console/vtxprintf.h>
#include <console/loglevel.h>
#include <uart8250.h>
@@ -32,9 +33,6 @@
#define console_loglevel CONFIG_DEFAULT_CONSOLE_LOGLEVEL
#endif
-void console_tx_byte(unsigned char byte);
-int do_printk(int msg_level, const char *fmt, ...);
-
void console_tx_byte(unsigned char byte)
{
if (byte == '\n')
Modified: trunk/src/lib/usbdebug_direct.c
===================================================================
--- trunk/src/lib/usbdebug_direct.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/lib/usbdebug_direct.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -83,7 +83,7 @@
unsigned ctrl;
int loop = 0x100000;
do {
- ctrl = readl(&ehci_debug->control);
+ ctrl = read32(&ehci_debug->control);
/* Stop when the transaction is finished */
if (ctrl & DBGP_DONE)
break;
@@ -94,7 +94,7 @@
/* Now that we have observed the completed transaction,
* clear the done bit.
*/
- writel(ctrl | DBGP_DONE, &ehci_debug->control);
+ write32(&ehci_debug->control, ctrl | DBGP_DONE);
return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl);
}
@@ -119,9 +119,9 @@
int loop = 3;
retry:
- writel(ctrl | DBGP_GO, &ehci_debug->control);
+ write32(&ehci_debug->control, ctrl | DBGP_GO);
ret = dbgp_wait_until_complete(ehci_debug);
- pids = readl(&ehci_debug->pids);
+ pids = read32(&ehci_debug->pids);
lpid = DBGP_PID_GET(pids);
if (ret < 0)
@@ -151,8 +151,8 @@
lo |= bytes[i] << (8*i);
for (; i < 8 && i < size; i++)
hi |= bytes[i] << (8*(i - 4));
- writel(lo, &ehci_debug->data03);
- writel(hi, &ehci_debug->data47);
+ write32(&ehci_debug->data03, lo);
+ write32(&ehci_debug->data47, hi);
}
static void dbgp_get_data(struct ehci_dbg_port *ehci_debug, void *buf, int size)
@@ -160,8 +160,8 @@
unsigned char *bytes = buf;
unsigned lo, hi;
int i;
- lo = readl(&ehci_debug->data03);
- hi = readl(&ehci_debug->data47);
+ lo = read32(&ehci_debug->data03);
+ hi = read32(&ehci_debug->data47);
for (i = 0; i < 4 && i < size; i++)
bytes[i] = (lo >> (8*i)) & 0xff;
for (; i < 8 && i < size; i++)
@@ -177,17 +177,17 @@
addr = DBGP_EPADDR(devnum, endpoint);
- pids = readl(&ehci_debug->pids);
+ pids = read32(&ehci_debug->pids);
pids = DBGP_PID_UPDATE(pids, USB_PID_OUT);
- ctrl = readl(&ehci_debug->control);
+ ctrl = read32(&ehci_debug->control);
ctrl = DBGP_LEN_UPDATE(ctrl, size);
ctrl |= DBGP_OUT;
ctrl |= DBGP_GO;
dbgp_set_data(ehci_debug, bytes, size);
- writel(addr, &ehci_debug->address);
- writel(pids, &ehci_debug->pids);
+ write32(&ehci_debug->address, addr);
+ write32(&ehci_debug->pids, pids);
ret = dbgp_wait_until_done(ehci_debug, ctrl);
if (ret < 0) {
@@ -211,16 +211,16 @@
addr = DBGP_EPADDR(devnum, endpoint);
- pids = readl(&ehci_debug->pids);
+ pids = read32(&ehci_debug->pids);
pids = DBGP_PID_UPDATE(pids, USB_PID_IN);
- ctrl = readl(&ehci_debug->control);
+ ctrl = read32(&ehci_debug->control);
ctrl = DBGP_LEN_UPDATE(ctrl, size);
ctrl &= ~DBGP_OUT;
ctrl |= DBGP_GO;
- writel(addr, &ehci_debug->address);
- writel(pids, &ehci_debug->pids);
+ write32(&ehci_debug->address, addr);
+ write32(&ehci_debug->pids, pids);
ret = dbgp_wait_until_done(ehci_debug, ctrl);
if (ret < 0)
return ret;
@@ -256,15 +256,15 @@
pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP);
addr = DBGP_EPADDR(devnum, 0);
- ctrl = readl(&ehci_debug->control);
+ ctrl = read32(&ehci_debug->control);
ctrl = DBGP_LEN_UPDATE(ctrl, sizeof(req));
ctrl |= DBGP_OUT;
ctrl |= DBGP_GO;
/* Send the setup message */
dbgp_set_data(ehci_debug, &req, sizeof(req));
- writel(addr, &ehci_debug->address);
- writel(pids, &ehci_debug->pids);
+ write32(&ehci_debug->address, addr);
+ write32(&ehci_debug->pids, pids);
ret = dbgp_wait_until_done(ehci_debug, ctrl);
if (ret < 0)
return ret;
@@ -282,25 +282,25 @@
int loop;
/* Reset the usb debug port */
- portsc = readl(&ehci_regs->port_status[port - 1]);
+ portsc = read32(&ehci_regs->port_status[port - 1]);
portsc &= ~PORT_PE;
portsc |= PORT_RESET;
- writel(portsc, &ehci_regs->port_status[port - 1]);
+ write32(&ehci_regs->port_status[port - 1], portsc);
delay = HUB_ROOT_RESET_TIME;
for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT;
delay_time += delay) {
dbgp_mdelay(delay);
- portsc = readl(&ehci_regs->port_status[port - 1]);
+ portsc = read32(&ehci_regs->port_status[port - 1]);
if (portsc & PORT_RESET) {
/* force reset to complete */
loop = 2;
- writel(portsc & ~(PORT_RWC_BITS | PORT_RESET),
- &ehci_regs->port_status[port - 1]);
+ write32(&ehci_regs->port_status[port - 1],
+ portsc & ~(PORT_RWC_BITS | PORT_RESET));
do {
dbgp_mdelay(delay);
- portsc = readl(&ehci_regs->port_status[port - 1]);
+ portsc = read32(&ehci_regs->port_status[port - 1]);
delay_time += delay;
} while ((portsc & PORT_RESET) && (--loop > 0));
if (!loop) {
@@ -329,7 +329,7 @@
int ret, reps;
for (reps = 0; reps < 3; reps++) {
dbgp_mdelay(100);
- status = readl(&ehci_regs->status);
+ status = read32(&ehci_regs->status);
if (status & STS_PCD) {
ret = ehci_reset_port(ehci_regs, port);
if (ret == 0)
@@ -366,7 +366,7 @@
unsigned playtimes = 3;
ehci_caps = (struct ehci_caps *)ehci_bar;
- ehci_regs = (struct ehci_regs *)(ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase)));
+ ehci_regs = (struct ehci_regs *)(ehci_bar + HC_LENGTH(read32(&ehci_caps->hc_capbase)));
ehci_debug = (struct ehci_dbg_port *)(ehci_bar + offset);
info->ehci_debug = (void *)0;
@@ -375,7 +375,7 @@
port_map_tried = 0;
try_next_port:
- hcs_params = readl(&ehci_caps->hcs_params);
+ hcs_params = read32(&ehci_caps->hcs_params);
debug_port = HCS_DEBUG_PORT(hcs_params);
n_ports = HCS_N_PORTS(hcs_params);
@@ -385,7 +385,7 @@
#if 1
for (i = 1; i <= n_ports; i++) {
- portsc = readl(&ehci_regs->port_status[i-1]);
+ portsc = read32(&ehci_regs->port_status[i-1]);
dbgp_printk("PORTSC #%d: %08x\n", i, portsc);
}
#endif
@@ -400,11 +400,11 @@
/* Reset the EHCI controller */
loop = 10;
- cmd = readl(&ehci_regs->command);
+ cmd = read32(&ehci_regs->command);
cmd |= CMD_RESET;
- writel(cmd, &ehci_regs->command);
+ write32(&ehci_regs->command, cmd);
do {
- cmd = readl(&ehci_regs->command);
+ cmd = read32(&ehci_regs->command);
} while ((cmd & CMD_RESET) && (--loop > 0));
if(!loop)
@@ -413,24 +413,24 @@
dbgp_printk("EHCI controller reset successfully.\n");
/* Claim ownership, but do not enable yet */
- ctrl = readl(&ehci_debug->control);
+ ctrl = read32(&ehci_debug->control);
ctrl |= DBGP_OWNER;
ctrl &= ~(DBGP_ENABLED | DBGP_INUSE);
- writel(ctrl, &ehci_debug->control);
+ write32(&ehci_debug->control, ctrl);
/* Start the ehci running */
- cmd = readl(&ehci_regs->command);
+ cmd = read32(&ehci_regs->command);
cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET);
cmd |= CMD_RUN;
- writel(cmd, &ehci_regs->command);
+ write32(&ehci_regs->command, cmd);
/* Ensure everything is routed to the EHCI */
- writel(FLAG_CF, &ehci_regs->configured_flag);
+ write32(&ehci_regs->configured_flag, FLAG_CF);
/* Wait until the controller is no longer halted */
loop = 10;
do {
- status = readl(&ehci_regs->status);
+ status = read32(&ehci_regs->status);
} while ((status & STS_HALT) && (--loop>0));
if(!loop) {
@@ -448,21 +448,21 @@
dbgp_printk("EHCI done waiting for port.\n");
/* Enable the debug port */
- ctrl = readl(&ehci_debug->control);
+ ctrl = read32(&ehci_debug->control);
ctrl |= DBGP_CLAIM;
- writel(ctrl, &ehci_debug->control);
- ctrl = readl(&ehci_debug->control);
+ write32(&ehci_debug->control, ctrl);
+ ctrl = read32(&ehci_debug->control);
if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) {
dbgp_printk("No device in EHCI debug port.\n");
- writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control);
+ write32(&ehci_debug->control, ctrl & ~DBGP_CLAIM);
goto err;
}
dbgp_printk("EHCI debug port enabled.\n");
/* Completely transfer the debug device to the debug controller */
- portsc = readl(&ehci_regs->port_status[debug_port - 1]);
+ portsc = read32(&ehci_regs->port_status[debug_port - 1]);
portsc &= ~PORT_PE;
- writel(portsc, &ehci_regs->port_status[debug_port - 1]);
+ write32(&ehci_regs->port_status[debug_port - 1], portsc);
dbgp_mdelay(100);
@@ -529,9 +529,9 @@
return;
err:
/* Things didn't work so remove my claim */
- ctrl = readl(&ehci_debug->control);
+ ctrl = read32(&ehci_debug->control);
ctrl &= ~(DBGP_CLAIM | DBGP_OUT);
- writel(ctrl, &ehci_debug->control);
+ write32(&ehci_debug->control, ctrl);
next_debug_port:
port_map_tried |= (1<<(debug_port-1));
Modified: trunk/src/mainboard/amd/db800/cache_as_ram_auto.c
===================================================================
--- trunk/src/mainboard/amd/db800/cache_as_ram_auto.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/mainboard/amd/db800/cache_as_ram_auto.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -19,6 +19,7 @@
*/
#define ASSEMBLY 1
+#define __PRE_RAM__
#include <stdint.h>
#include <device/pci_def.h>
Modified: trunk/src/mainboard/artecgroup/dbe61/cache_as_ram_auto.c
===================================================================
--- trunk/src/mainboard/artecgroup/dbe61/cache_as_ram_auto.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/mainboard/artecgroup/dbe61/cache_as_ram_auto.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -19,6 +19,7 @@
*/
#define ASSEMBLY 1
+#define __PRE_RAM__
#include <stdint.h>
#include <device/pci_def.h>
Modified: trunk/src/mainboard/digitallogic/msm800sev/cache_as_ram_auto.c
===================================================================
--- trunk/src/mainboard/digitallogic/msm800sev/cache_as_ram_auto.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/mainboard/digitallogic/msm800sev/cache_as_ram_auto.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -1,4 +1,5 @@
#define ASSEMBLY 1
+#define __PRE_RAM__
#include <stdint.h>
#include <device/pci_def.h>
Modified: trunk/src/mainboard/iei/pcisa-lx-800-r10/cache_as_ram_auto.c
===================================================================
--- trunk/src/mainboard/iei/pcisa-lx-800-r10/cache_as_ram_auto.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/mainboard/iei/pcisa-lx-800-r10/cache_as_ram_auto.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -19,6 +19,7 @@
*/
#define ASSEMBLY 1
+#define __PRE_RAM__
#include <stdint.h>
#include <device/pci_def.h>
Modified: trunk/src/mainboard/intel/eagleheights/auto.c
===================================================================
--- trunk/src/mainboard/intel/eagleheights/auto.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/mainboard/intel/eagleheights/auto.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -133,22 +133,22 @@
pci_write_config32(PCI_DEV(0, 0x1F, 0), RCBA, DEFAULT_RCBA | 1);
/* Disable watchdog */
- gcs = readl(DEFAULT_RCBA + RCBA_GCS);
+ gcs = read32(DEFAULT_RCBA + RCBA_GCS);
gcs |= (1 << 5); /* No reset */
- writel(gcs, DEFAULT_RCBA + RCBA_GCS);
+ write32(DEFAULT_RCBA + RCBA_GCS, gcs);
/* Configure PCIe port B as 4x */
- rpc = readl(DEFAULT_RCBA + RCBA_RPC);
+ rpc = read32(DEFAULT_RCBA + RCBA_RPC);
rpc |= (3 << 0);
- writel(rpc, DEFAULT_RCBA + RCBA_RPC);
+ write32(DEFAULT_RCBA + RCBA_RPC, rpc);
/* Disable Modem, Audio, PCIe ports 2/3/4 */
- fd = readl(DEFAULT_RCBA + RCBA_FD);
+ fd = read32(DEFAULT_RCBA + RCBA_FD);
fd |= (1 << 19) | (1 << 18) | (1 << 17) | (1 << 6) | (1 << 5);
- writel(fd, DEFAULT_RCBA + RCBA_FD);
+ write32(DEFAULT_RCBA + RCBA_FD, fd);
/* Enable HPET */
- writel((1 << 7), DEFAULT_RCBA + RCBA_HPTC);
+ write32(DEFAULT_RCBA + RCBA_HPTC, (1 << 7));
/* Improve interrupt routing
* D31:F2 SATA INTB# -> PIRQD
@@ -160,10 +160,10 @@
* D28:F0 PCIe Port 1 INTA# -> PIRQE
*/
- writew(0x0230, DEFAULT_RCBA + RCBA_D31IR);
- writew(0x3210, DEFAULT_RCBA + RCBA_D30IR);
- writew(0x3237, DEFAULT_RCBA + RCBA_D29IR);
- writew(0x3214, DEFAULT_RCBA + RCBA_D28IR);
+ write16(DEFAULT_RCBA + RCBA_D31IR, 0x0230);
+ write16(DEFAULT_RCBA + RCBA_D30IR, 0x3210);
+ write16(DEFAULT_RCBA + RCBA_D29IR, 0x3237);
+ write16(DEFAULT_RCBA + RCBA_D28IR, 0x3214);
/* Setup sata mode */
pci_write_config8(PCI_DEV(0, 0x1F, 2), SATA_MAP, (SATA_MODE_AHCI << 6) | (0 << 0));
Modified: trunk/src/mainboard/intel/eagleheights/mptable.c
===================================================================
--- trunk/src/mainboard/intel/eagleheights/mptable.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/mainboard/intel/eagleheights/mptable.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -234,10 +234,10 @@
/* PCIe Port B
*/
for(i = 0; i < 4; i++) {
- pin = (readl(rcba + RCBA_D28IP) >> (i * 4)) & 0x0F;
+ pin = (read32(rcba + RCBA_D28IP) >> (i * 4)) & 0x0F;
if(pin > 0) {
pin -= 1;
- route = PIRQ_A + ((readw(rcba + RCBA_D28IR) >> (pin * 4)) & 0x07);
+ route = PIRQ_A + ((read16(rcba + RCBA_D28IR) >> (pin * 4)) & 0x07);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chipset, PCI_IRQ(28, pin), IO_APIC0, route);
}
}
@@ -245,20 +245,20 @@
/* USB 1.1 : device 29, function 0, 1
*/
for(i = 0; i < 2; i++) {
- pin = (readl(rcba + RCBA_D29IP) >> (i * 4)) & 0x0F;
+ pin = (read32(rcba + RCBA_D29IP) >> (i * 4)) & 0x0F;
if(pin > 0) {
pin -= 1;
- route = PIRQ_A + ((readw(rcba + RCBA_D29IR) >> (pin * 4)) & 0x07);
+ route = PIRQ_A + ((read16(rcba + RCBA_D29IR) >> (pin * 4)) & 0x07);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chipset, PCI_IRQ(29, pin), IO_APIC0, route);
}
}
/* USB 2.0 : device 29, function 7
*/
- pin = (readl(rcba + RCBA_D29IP) >> (7 * 4)) & 0x0F;
+ pin = (read32(rcba + RCBA_D29IP) >> (7 * 4)) & 0x0F;
if(pin > 0) {
pin -= 1;
- route = PIRQ_A + ((readw(rcba + RCBA_D29IR) >> (pin * 4)) & 0x07);
+ route = PIRQ_A + ((read16(rcba + RCBA_D29IR) >> (pin * 4)) & 0x07);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chipset, PCI_IRQ(29, pin), IO_APIC0, route);
}
@@ -267,10 +267,10 @@
Performance counters : device 31 function 4
*/
for(i = 2; i < 5; i++) {
- pin = (readl(rcba + RCBA_D31IP) >> (i * 4)) & 0x0F;
+ pin = (read32(rcba + RCBA_D31IP) >> (i * 4)) & 0x0F;
if(pin > 0) {
pin -= 1;
- route = PIRQ_A + ((readw(rcba + RCBA_D31IR) >> (pin * 4)) & 0x07);
+ route = PIRQ_A + ((read16(rcba + RCBA_D31IR) >> (pin * 4)) & 0x07);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chipset, PCI_IRQ(31, pin), IO_APIC0, route);
}
}
Modified: trunk/src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c
===================================================================
--- trunk/src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -22,6 +22,7 @@
/* Based on cache_as_ram_auto.c from AMD's DB800 and DBM690T mainboards. */
#define ASSEMBLY 1
+#define __PRE_RAM__
#include <stdlib.h>
#include <stdint.h>
Modified: trunk/src/mainboard/lippert/spacerunner-lx/cache_as_ram_auto.c
===================================================================
--- trunk/src/mainboard/lippert/spacerunner-lx/cache_as_ram_auto.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/mainboard/lippert/spacerunner-lx/cache_as_ram_auto.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -22,6 +22,7 @@
/* Based on cache_as_ram_auto.c from AMD's DB800 and DBM690T mainboards. */
#define ASSEMBLY 1
+#define __PRE_RAM__
#include <stdlib.h>
#include <stdint.h>
Modified: trunk/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c
===================================================================
--- trunk/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -18,6 +18,7 @@
*/
#define ASSEMBLY 1
+#define __PRE_RAM__
#include <stdint.h>
#include <spd.h>
Modified: trunk/src/northbridge/amd/gx1/northbridge.c
===================================================================
--- trunk/src/northbridge/amd/gx1/northbridge.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/northbridge/amd/gx1/northbridge.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -36,8 +36,8 @@
static void enable_shadow(device_t dev)
{
- writel(0x77777777,GX_BASE+BC_XMAP_2);
- writel(0x77777777,GX_BASE+BC_XMAP_3);
+ write32(GX_BASE+BC_XMAP_2, 0x77777777);
+ write32(GX_BASE+BC_XMAP_3, 0x77777777);
}
static void northbridge_init(device_t dev)
Modified: trunk/src/northbridge/amd/gx1/raminit.c
===================================================================
--- trunk/src/northbridge/amd/gx1/raminit.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/northbridge/amd/gx1/raminit.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -34,12 +34,12 @@
void setGX1Mem(unsigned int addr, unsigned int data)
{
- writel(data, (volatile void *)addr);
+ write32(addr, data);
}
unsigned int getGX1Mem(unsigned int addr)
{
- return (unsigned int)readl((const volatile void *)addr);
+ return (unsigned int)read32(addr);
}
void do_refresh(void)
Modified: trunk/src/southbridge/amd/amd8111/amd8111_nic.c
===================================================================
--- trunk/src/southbridge/amd/amd8111/amd8111_nic.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/amd/amd8111/amd8111_nic.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -54,12 +54,12 @@
/* Hard Reset PHY */
printk_debug("Reseting PHY... ");
if (conf->phy_lowreset) {
- writel(VAL0 | PHY_RST_POL | RESET_PHY , (void *)(mmio + CMD3));
+ write32((void *)(mmio + CMD3), VAL0 | PHY_RST_POL | RESET_PHY);
} else {
- writel(VAL0 | RESET_PHY, (void *)(mmio + CMD3));
+ write32((void *)(mmio + CMD3), VAL0 | RESET_PHY);
}
mdelay(15);
- writel(RESET_PHY, (void *)(mmio + CMD3));
+ write32((void *)(mmio + CMD3), RESET_PHY);
printk_debug("Done\n");
}
Modified: trunk/src/southbridge/amd/cs5530/cs5530_vga.c
===================================================================
--- trunk/src/southbridge/amd/cs5530/cs5530_vga.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/amd/cs5530/cs5530_vga.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -242,27 +242,27 @@
unsigned long reg;
/* disable the PLL first, reset and power it down */
- reg = readl(io_base+CS5530_DOT_CLK_CONFIG) & ~0x20;
+ reg = read32(io_base+CS5530_DOT_CLK_CONFIG) & ~0x20;
reg |= 0x80000100;
- writel(reg, io_base+CS5530_DOT_CLK_CONFIG);
+ write32(io_base+CS5530_DOT_CLK_CONFIG, reg);
/* write the new PLL setting */
reg |= (pll_val & ~0x80000920);
- writel(reg, io_base+CS5530_DOT_CLK_CONFIG);
+ write32(io_base+CS5530_DOT_CLK_CONFIG, reg);
mdelay(1); /* wait for control voltage to be 0V */
/* enable the PLL */
reg |= 0x00000800;
- writel(reg, io_base+CS5530_DOT_CLK_CONFIG);
+ write32(io_base+CS5530_DOT_CLK_CONFIG, reg);
/* clear reset */
reg &= ~0x80000000;
- writel(reg, io_base+CS5530_DOT_CLK_CONFIG);
+ write32(io_base+CS5530_DOT_CLK_CONFIG, reg);
/* clear bypass */
reg &= ~0x00000100;
- writel(reg, io_base+CS5530_DOT_CLK_CONFIG);
+ write32(io_base+CS5530_DOT_CLK_CONFIG, reg);
}
/**
@@ -286,15 +286,15 @@
{
u32 base = 0x00000000;
- writel(base, gx_base + DC_FB_ST_OFFSET);
+ write32(gx_base + DC_FB_ST_OFFSET, base);
base += (COLOUR_DEPTH>>3) * mode->visible_pixel * mode->visible_lines;
- writel(base, gx_base + DC_CB_ST_OFFSET);
- writel(base, gx_base + DC_CURS_ST_OFFSET);
- writel(base, gx_base + DC_VID_ST_OFFSET);
- writel(((COLOUR_DEPTH>>3) * mode->visible_pixel) >> 2, gx_base + DC_LINE_DELTA);
- writel(((COLOUR_DEPTH>>3) * mode->visible_pixel) >> 3, gx_base + DC_BUF_SIZE);
+ write32(gx_base + DC_CB_ST_OFFSET, base);
+ write32(gx_base + DC_CURS_ST_OFFSET, base);
+ write32(gx_base + DC_VID_ST_OFFSET, base);
+ write32(gx_base + DC_LINE_DELTA, ((COLOUR_DEPTH>>3) * mode->visible_pixel) >> 2);
+ write32(gx_base + DC_BUF_SIZE, ((COLOUR_DEPTH>>3) * mode->visible_pixel) >> 3);
}
/**
@@ -343,20 +343,20 @@
vtotal = vblankend;
/* row description */
- writel((hactive - 1) | ((htotal - 1) << 16), gx_base + DC_H_TIMING_1);
+ write32(gx_base + DC_H_TIMING_1, (hactive - 1) | ((htotal - 1) << 16));
/* horizontal blank description */
- writel((hblankstart - 1) | ((hblankend - 1) << 16), gx_base + DC_H_TIMING_2);
+ write32(gx_base + DC_H_TIMING_2, (hblankstart - 1) | ((hblankend - 1) << 16));
/* horizontal sync description */
- writel((hsyncstart - 1) | ((hsyncend - 1) << 16), gx_base + DC_H_TIMING_3);
- writel((hsyncstart - 1) | ((hsyncend - 1) << 16), gx_base + DC_FP_H_TIMING);
+ write32(gx_base + DC_H_TIMING_3, (hsyncstart - 1) | ((hsyncend - 1) << 16));
+ write32(gx_base + DC_FP_H_TIMING, (hsyncstart - 1) | ((hsyncend - 1) << 16));
/* line description */
- writel((vactive - 1) | ((vtotal - 1) << 16), gx_base + DC_V_TIMING_1);
+ write32(gx_base + DC_V_TIMING_1, (vactive - 1) | ((vtotal - 1) << 16));
/* vertical blank description */
- writel((vblankstart - 1) | ((vblankend - 1) << 16), gx_base + DC_V_TIMING_2);
+ write32(gx_base + DC_V_TIMING_2, (vblankstart - 1) | ((vblankend - 1) << 16));
/* vertical sync description */
- writel((vsyncstart - 1) | ((vsyncend - 1) << 16), gx_base + DC_V_TIMING_3);
- writel((vsyncstart - 2) | ((vsyncend - 2) << 16), gx_base + DC_FP_V_TIMING);
+ write32(gx_base + DC_V_TIMING_3, (vsyncstart - 1) | ((vsyncend - 1) << 16));
+ write32(gx_base + DC_FP_V_TIMING, (vsyncstart - 2) | ((vsyncend - 2) << 16));
}
/**
@@ -369,14 +369,14 @@
*/
static void cs5530_activate_mode(void *gx_base, const struct video_mode *mode)
{
- writel(0x00000080, gx_base + DC_GENERAL_CFG);
+ write32(gx_base + DC_GENERAL_CFG, 0x00000080);
mdelay(1);
dc_setup_layout(gx_base,mode);
dc_setup_timing(gx_base,mode);
- writel(0x2000C581, gx_base + DC_GENERAL_CFG);
- writel(0x0000002F, gx_base + DC_TIMING_CFG);
- writel(0x00003004, gx_base + DC_OUTPUT_CFG);
+ write32(gx_base + DC_GENERAL_CFG, 0x2000C581);
+ write32(gx_base + DC_TIMING_CFG, 0x0000002F);
+ write32(gx_base + DC_OUTPUT_CFG, 0x00003004);
}
/**
@@ -392,7 +392,7 @@
u32 val;
val = (u32)mode->sync_pol << 8;
- writel(val | 0x0020002F, io_base + CS5530_DISPLAY_CONFIG);
+ write32(io_base + CS5530_DISPLAY_CONFIG, val | 0x0020002F);
}
#if CONFIG_SPLASH_GRAPHIC == 1
@@ -465,7 +465,7 @@
cs5530_set_clock_frequency(io_base, mode->pll_value);
- writel(DC_UNLOCK_MAGIC, gx_base + DC_UNLOCK);
+ write32(gx_base + DC_UNLOCK, DC_UNLOCK_MAGIC);
show_boot_splash_16(mode->visible_pixel, mode->visible_lines,
mode->visible_pixel * (COLOUR_DEPTH>>3), (void*)(GX_BASE + 0x800000));
@@ -473,7 +473,7 @@
cs5530_activate_mode(gx_base, mode);
cs5530_activate_video(io_base, mode);
- writel(0x00000000, gx_base + DC_UNLOCK);
+ write32(gx_base + DC_UNLOCK, 0x00000000);
}
static struct device_operations vga_ops = {
Modified: trunk/src/southbridge/amd/cs5536/cs5536.c
===================================================================
--- trunk/src/southbridge/amd/cs5536/cs5536.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/amd/cs5536/cs5536.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -428,10 +428,10 @@
bar = (uint8_t *) pci_read_config32(dev, PCI_BASE_ADDRESS_0);
/* Make HCCPARAMS writeable */
- writel(readl(bar + IPREG04) | USB_HCCPW_SET, bar + IPREG04);
+ write32(bar + IPREG04, read32(bar + IPREG04) | USB_HCCPW_SET);
/* ; EECP=50h, IST=01h, ASPC=1 */
- writel(0x00005012, bar + HCCPARAMS);
+ write32(bar + HCCPARAMS, 0x00005012);
}
dev = dev_find_device(PCI_VENDOR_ID_AMD,
@@ -439,19 +439,19 @@
if (dev) {
bar = (uint8_t *) pci_read_config32(dev, PCI_BASE_ADDRESS_0);
- writel(readl(bar + UOCMUX) & PUEN_SET, bar + UOCMUX);
+ write32(bar + UOCMUX, read32(bar + UOCMUX) & PUEN_SET);
/* Host or Device? */
if (sb->enable_USBP4_device) {
- writel(readl(bar + UOCMUX) | PMUX_DEVICE, bar + UOCMUX);
+ write32(bar + UOCMUX, read32(bar + UOCMUX) | PMUX_DEVICE);
} else {
- writel(readl(bar + UOCMUX) | PMUX_HOST, bar + UOCMUX);
+ write32(bar + UOCMUX, read32(bar + UOCMUX) | PMUX_HOST);
}
/* Overcurrent configuration */
if (sb->enable_USBP4_overcurrent) {
- writel(readl(bar + UOCCAP)
- | sb->enable_USBP4_overcurrent, bar + UOCCAP);
+ write32(bar + UOCCAP, read32(bar + UOCCAP)
+ | sb->enable_USBP4_overcurrent);
}
}
@@ -467,8 +467,8 @@
if (dev) {
bar = (uint8_t *) pci_read_config32(dev,
PCI_BASE_ADDRESS_0);
- writel(readl(bar + UDCDEVCTL) | UDC_SD_SET,
- bar + UDCDEVCTL);
+ write32(bar + UDCDEVCTL,
+ read32(bar + UDCDEVCTL) | UDC_SD_SET);
}
@@ -477,8 +477,8 @@
if (dev) {
bar = (uint8_t *) pci_read_config32(dev,
PCI_BASE_ADDRESS_0);
- writel(readl(bar + UOCCTL) | PADEN_SET, bar + UOCCTL);
- writel(readl(bar + UOCCAP) | APU_SET, bar + UOCCAP);
+ write32(bar + UOCCTL, read32(bar + UOCCTL) | PADEN_SET);
+ write32(bar + UOCCAP, read32(bar + UOCCAP) | APU_SET);
}
}
Modified: trunk/src/southbridge/amd/sb600/sb600_hda.c
===================================================================
--- trunk/src/southbridge/amd/sb600/sb600_hda.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/amd/sb600/sb600_hda.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -37,10 +37,10 @@
/* Write (val & ~mask) to port */
val &= mask;
- dword = readl(port);
+ dword = read32(port);
dword &= ~mask;
dword |= val;
- writel(dword, port);
+ write32(port, dword);
/* Wait for readback of register to
* match what was just written to it
@@ -49,7 +49,7 @@
do {
/* Wait 1ms based on BKDG wait time */
mdelay(1);
- dword = readl(port);
+ dword = read32(port);
dword &= mask;
} while ((dword != val) && --count);
@@ -75,7 +75,7 @@
mdelay(1);
/* Read in Codec location (BAR + 0xe)[3..0]*/
- dword = readl(base + 0xe);
+ dword = read32(base + 0xe);
dword &= 0x0F;
if (!dword)
goto no_codec;
@@ -180,7 +180,7 @@
int timeout = 50;
while(timeout--) {
- u32 dword=readl(base + HDA_ICII_REG);
+ u32 dword=read32(base + HDA_ICII_REG);
if (!(dword & HDA_ICII_BUSY))
return 0;
udelay(1);
@@ -202,7 +202,7 @@
int timeout = 50;
while(timeout--) {
- u32 dword = readl(base + HDA_ICII_REG);
+ u32 dword = read32(base + HDA_ICII_REG);
if ((dword & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
HDA_ICII_VALID)
return 0;
@@ -224,12 +224,12 @@
return;
dword = (addr << 28) | 0x000f0000;
- writel(dword, base + 0x60);
+ write32(base + 0x60, dword);
if (wait_for_valid(base) == -1)
return;
- dword = readl(base + 0x64);
+ dword = read32(base + 0x64);
/* 2 */
printk_debug("codec viddid: %08x\n", dword);
@@ -246,7 +246,7 @@
if (wait_for_ready(base) == -1)
return;
- writel(verb[i], base + 0x60);
+ write32(base + 0x60, verb[i]);
if (wait_for_valid(base) == -1)
return;
Modified: trunk/src/southbridge/amd/sb600/sb600_sata.c
===================================================================
--- trunk/src/southbridge/amd/sb600/sb600_sata.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/amd/sb600/sb600_sata.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -172,7 +172,7 @@
/* Use BAR5+0x2A8,BAR2 for Secondary Slave */
for (i = 0; i < 4; i++) {
- byte = readb(sata_bar5 + 0x128 + 0x80 * i);
+ byte = read8(sata_bar5 + 0x128 + 0x80 * i);
printk_spew("SATA port %i status = %x\n", i, byte);
byte &= 0xF;
@@ -182,24 +182,24 @@
printk_spew("SATA device detected but not talking. Trying lower speed.\n");
/* Read in Port-N Serial ATA Control Register */
- byte = readb(sata_bar5 + 0x12C + 0x80 * i);
+ byte = read8(sata_bar5 + 0x12C + 0x80 * i);
/* Set Reset Bit and 1.5g bit */
byte |= 0x11;
- writeb(byte, (sata_bar5 + 0x12C + 0x80 * i));
+ write8((sata_bar5 + 0x12C + 0x80 * i), byte);
/* Wait 1ms */
mdelay(1);
/* Clear Reset Bit */
byte &= ~0x01;
- writeb(byte, (sata_bar5 + 0x12C + 0x80 * i));
+ write8((sata_bar5 + 0x12C + 0x80 * i), byte);
/* Wait 1ms */
mdelay(1);
/* Reread status */
- byte = readb(sata_bar5 + 0x128 + 0x80 * i);
+ byte = read8(sata_bar5 + 0x128 + 0x80 * i);
printk_spew("SATA port %i status = %x\n", i, byte);
byte &= 0xF;
}
@@ -223,15 +223,15 @@
/* Below is CIM InitSataLateFar */
/* Enable interrupts from the HBA */
- byte = readb(sata_bar5 + 0x4);
+ byte = read8(sata_bar5 + 0x4);
byte |= 1 << 1;
- writeb(byte, (sata_bar5 + 0x4));
+ write8((sata_bar5 + 0x4), byte);
/* Clear error status */
- writel(0xFFFFFFFF, (sata_bar5 + 0x130));
- writel(0xFFFFFFFF, (sata_bar5 + 0x1b0));
- writel(0xFFFFFFFF, (sata_bar5 + 0x230));
- writel(0xFFFFFFFF, (sata_bar5 + 0x2b0));
+ write32((sata_bar5 + 0x130), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x1b0), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x230), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x2b0), 0xFFFFFFFF);
/* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */
/* ????? why CIM does not set the AcpiGpe0BlkAddr , but use it??? */
@@ -241,7 +241,7 @@
/* byte = pm_ioread(0x29); */
/* word |= byte<<8; */
/* printk_debug("AcpiGpe0Blk addr = %x\n", word); */
- /* writel(0x80000000 , word); */
+ /* write32(word, 0x80000000); */
}
static struct pci_operations lops_pci = {
Modified: trunk/src/southbridge/amd/sb600/sb600_usb.c
===================================================================
--- trunk/src/southbridge/amd/sb600/sb600_usb.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/amd/sb600/sb600_usb.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -98,16 +98,16 @@
/* RPR5.4 Enables the USB PHY auto calibration resister to match 45ohm resistence */
dword = 0x00020F00;
- writel(dword, usb2_bar0 + 0xC0);
+ write32(usb2_bar0 + 0xC0, dword);
/* RPR5.5 Sets In/OUT FIFO threshold for best performance */
dword = 0x00200040;
- writel(dword, usb2_bar0 + 0xA4);
+ write32(usb2_bar0 + 0xA4, dword);
/* RPR5.9 Disable the EHCI Dynamic Power Saving feature */
- word = readl(usb2_bar0 + 0xBC);
+ word = read16(usb2_bar0 + 0xBC);
word &= ~(1 << 12);
- writew(word, usb2_bar0 + 0xBC);
+ write16(usb2_bar0 + 0xBC, word);
/* RPR5.10 Disable EHCI MSI support */
byte = pci_read_config8(dev, 0x50);
Modified: trunk/src/southbridge/broadcom/bcm5785/bcm5785_sata.c
===================================================================
--- trunk/src/southbridge/broadcom/bcm5785/bcm5785_sata.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/broadcom/bcm5785/bcm5785_sata.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -52,13 +52,13 @@
printk_debug("init PHY...\n");
for(i=0; i<4; i++) {
mmio = base + 0x100 * i;
- byte = readb(mmio + 0x40);
+ byte = read8(mmio + 0x40);
printk_debug("port %d PHY status = %02x\r\n", i, byte);
if(byte & 0x4) {// bit 2 is set
- byte = readb(mmio+0x48);
- writeb(byte | 1, mmio + 0x48);
- writeb(byte & (~1), mmio + 0x48);
- byte = readb(mmio + 0x40);
+ byte = read8(mmio+0x48);
+ write8(mmio + 0x48, byte | 1);
+ write8(mmio + 0x48, byte & (~1));
+ byte = read8(mmio + 0x40);
printk_debug("after reset port %d PHY status = %02x\r\n", i, byte);
}
}
Modified: trunk/src/southbridge/intel/i82801gx/i82801gx_azalia.c
===================================================================
--- trunk/src/southbridge/intel/i82801gx/i82801gx_azalia.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/intel/i82801gx/i82801gx_azalia.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -40,10 +40,10 @@
/* Write (val & mask) to port */
val &= mask;
- reg32 = readl(port);
+ reg32 = read32(port);
reg32 &= ~mask;
reg32 |= val;
- writel(reg32, port);
+ write32(port, reg32);
/* Wait for readback of register to
* match what was just written to it
@@ -52,7 +52,7 @@
do {
/* Wait 1ms based on BKDG wait time */
mdelay(1);
- reg32 = readl(port);
+ reg32 = read32(port);
reg32 &= mask;
} while ((reg32 != val) && --count);
@@ -75,7 +75,7 @@
goto no_codec;
/* Read in Codec location (BAR + 0xe)[2..0]*/
- reg32 = readl(base + 0xe);
+ reg32 = read32(base + 0xe);
reg32 &= 0x0f;
if (!reg32)
goto no_codec;
@@ -124,7 +124,7 @@
int timeout = 50;
while(timeout--) {
- u32 reg32 = readl(base + HDA_ICII_REG);
+ u32 reg32 = read32(base + HDA_ICII_REG);
if (!(reg32 & HDA_ICII_BUSY))
return 0;
udelay(1);
@@ -144,16 +144,16 @@
u32 reg32;
/* Send the verb to the codec */
- reg32 = readl(base + 0x68);
+ reg32 = read32(base + 0x68);
reg32 |= (1 << 0) | (1 << 1);
- writel(reg32, base + 0x68);
+ write32(base + 0x68, reg32);
/* Use a 50 usec timeout - the Linux kernel uses the
* same duration */
int timeout = 50;
while(timeout--) {
- reg32 = readl(base + HDA_ICII_REG);
+ reg32 = read32(base + HDA_ICII_REG);
if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
HDA_ICII_VALID)
return 0;
@@ -177,12 +177,12 @@
return;
reg32 = (addr << 28) | 0x000f0000;
- writel(reg32, base + 0x60);
+ write32(base + 0x60, reg32);
if (wait_for_valid(base) == -1)
return;
- reg32 = readl(base + 0x64);
+ reg32 = read32(base + 0x64);
/* 2 */
printk_debug("Azalia: codec viddid: %08x\n", reg32);
@@ -199,7 +199,7 @@
if (wait_for_ready(base) == -1)
return;
- writel(verb[i], base + 0x60);
+ write32(base + 0x60, verb[i]);
if (wait_for_valid(base) == -1)
return;
Modified: trunk/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c
===================================================================
--- trunk/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -31,10 +31,9 @@
u32 dbgctl;
printk_debug("Enabling OWNER_CNT\n");
- dbgctl = readl(EHCI_BAR + EHCI_DEBUG_OFFSET);
+ dbgctl = read32(EHCI_BAR + EHCI_DEBUG_OFFSET);
dbgctl |= (1 << 30);
- writel(dbgctl, EHCI_BAR + EHCI_DEBUG_OFFSET);
-
+ write32(EHCI_BAR + EHCI_DEBUG_OFFSET, dbgctl);
}
static void i82801gx_enable_usbdebug_direct(unsigned port)
Modified: trunk/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c
===================================================================
--- trunk/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -53,8 +53,8 @@
/* Clear any pending port changes */
res = find_resource(dev, 0x10);
base = res->base;
- reg32 = readl((u8 *)base + 0x24) | (1 << 2);
- writel(reg32, (u8 *)base + 0x24);
+ reg32 = read32((u8 *)base + 0x24) | (1 << 2);
+ write32((u8 *)base + 0x24, reg32);
/* workaround */
reg8 = pci_read_config8(dev, 0x84);
Modified: trunk/src/southbridge/nvidia/ck804/ck804_nic.c
===================================================================
--- trunk/src/southbridge/nvidia/ck804/ck804_nic.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/nvidia/ck804/ck804_nic.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -27,7 +27,7 @@
#define NvRegPhyInterface 0xC0
#define PHY_RGMII 0x10000000
- writel(PHY_RGMII, base + NvRegPhyInterface);
+ write32(base + NvRegPhyInterface, PHY_RGMII);
old = dword = pci_read_config32(dev, 0x30);
dword &= ~(0xf);
@@ -76,15 +76,15 @@
if (!eeprom_valid) {
unsigned long mac_pos;
mac_pos = 0xffffffd0; /* See romstrap.inc and romstrap.lds. */
- mac_l = readl((uint8_t*)mac_pos) + nic_index;
- mac_h = readl((uint8_t*)mac_pos + 4);
+ mac_l = read32((uint8_t*)mac_pos) + nic_index;
+ mac_h = read32((uint8_t*)mac_pos + 4);
}
#if 1
/* Set that into NIC MMIO. */
#define NvRegMacAddrA 0xA8
#define NvRegMacAddrB 0xAC
- writel(mac_l, base + NvRegMacAddrA);
- writel(mac_h, base + NvRegMacAddrB);
+ write32(base + NvRegMacAddrA, mac_l);
+ write32(base + NvRegMacAddrB, mac_h);
#else
/* Set that into NIC. */
pci_write_config32(dev, 0xa8, mac_l);
Modified: trunk/src/southbridge/nvidia/mcp55/mcp55_aza.c
===================================================================
--- trunk/src/southbridge/nvidia/mcp55/mcp55_aza.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/nvidia/mcp55/mcp55_aza.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -36,14 +36,14 @@
int count;
val &= mask;
- dword = readl(port);
+ dword = read32(port);
dword &= ~mask;
dword |= val;
- writel(dword, port);
+ write32(port, dword);
count = 50;
do {
- dword = readl(port);
+ dword = read32(port);
dword &= mask;
udelay(100);
} while ((dword != val) && --count);
@@ -63,9 +63,9 @@
set_bits(base + 0x08, 1, 1);
/* 2 */
- dword = readl(base + 0x0e);
+ dword = read32(base + 0x0e);
dword |= 7;
- writel(dword, base + 0x0e);
+ write32(base + 0x0e, dword);
/* 3 */
set_bits(base + 0x08, 1, 0);
@@ -74,7 +74,7 @@
set_bits(base + 0x08, 1, 1);
/* 5 */
- dword = readl(base + 0xe);
+ dword = read32(base + 0xe);
dword &= 7;
/* 6 */
@@ -173,17 +173,17 @@
/* 1 */
do {
- dword = readl(base + 0x68);
+ dword = read32(base + 0x68);
} while (dword & 1);
dword = (addr<<28) | 0x000f0000;
- writel(dword, base + 0x60);
+ write32(base + 0x60, dword);
do {
- dword = readl(base + 0x68);
+ dword = read32(base + 0x68);
} while ((dword & 3)!=2);
- dword = readl(base + 0x64);
+ dword = read32(base + 0x64);
/* 2 */
printk_debug("codec viddid: %08x\n", dword);
@@ -198,13 +198,13 @@
/* 3 */
for(i=0; i<verb_size; i++) {
do {
- dword = readl(base + 0x68);
+ dword = read32(base + 0x68);
} while (dword & 1);
- writel(verb[i], base + 0x60);
+ write32(base + 0x60, verb[i]);
do {
- dword = readl(base + 0x68);
+ dword = read32(base + 0x68);
} while ((dword & 3) != 2);
}
printk_debug("verb loaded!\n");
Modified: trunk/src/southbridge/nvidia/mcp55/mcp55_nic.c
===================================================================
--- trunk/src/southbridge/nvidia/mcp55/mcp55_nic.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/nvidia/mcp55/mcp55_nic.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -35,22 +35,22 @@
{
uint32_t dword;
unsigned loop = 0x100;
- writel(0x8000, base+0x190); //Clear MDIO lock bit
+ write32(base+0x190, 0x8000); //Clear MDIO lock bit
mdelay(1);
- dword = readl(base+0x190);
+ dword = read32(base+0x190);
if(dword & (1<<15)) return -1;
- writel(1, base+0x180);
- writel((phy_addr<<5) | (phy_reg),base + 0x190);
+ write32(base+0x180, 1);
+ write32(base + 0x190, (phy_addr<<5) | (phy_reg));
do{
- dword = readl(base + 0x190);
+ dword = read32(base + 0x190);
if(--loop==0) return -4;
} while ((dword & (1<<15)) );
- dword = readl(base + 0x180);
+ dword = read32(base + 0x180);
if(dword & 1) return -3;
- dword = readl(base + 0x194);
+ dword = read32(base + 0x194);
return dword;
@@ -62,9 +62,9 @@
int i;
int val;
unsigned id;
- dword = readl(base+0x188);
+ dword = read32(base+0x188);
dword &= ~(1<<20);
- writel(dword, base+0x188);
+ write32(base+0x188, dword);
phy_read(base, 0, 1);
@@ -116,7 +116,7 @@
#define NvRegPhyInterface 0xC0
#define PHY_RGMII 0x10000000
- writel(PHY_RGMII, base + NvRegPhyInterface);
+ write32(base + NvRegPhyInterface, PHY_RGMII);
conf = dev->chip_info;
@@ -157,16 +157,16 @@
if(!eeprom_valid) {
unsigned long mac_pos;
mac_pos = 0xffffffd0; // refer to romstrap.inc and romstrap.lds
- mac_l = readl(mac_pos) + nic_index; // overflow?
- mac_h = readl(mac_pos + 4);
+ mac_l = read32(mac_pos) + nic_index; // overflow?
+ mac_h = read32(mac_pos + 4);
}
#if 1
// set that into NIC MMIO
#define NvRegMacAddrA 0xA8
#define NvRegMacAddrB 0xAC
- writel(mac_l, base + NvRegMacAddrA);
- writel(mac_h, base + NvRegMacAddrB);
+ write32(base + NvRegMacAddrA, mac_l);
+ write32(base + NvRegMacAddrB, mac_h);
#else
// set that into NIC
pci_write_config32(dev, 0xa8, mac_l);
Modified: trunk/src/southbridge/sis/sis966/sis966_aza.c
===================================================================
--- trunk/src/southbridge/sis/sis966/sis966_aza.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/sis/sis966/sis966_aza.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -48,14 +48,14 @@
int count;
val &= mask;
- dword = readl(port);
+ dword = read32(port);
dword &= ~mask;
dword |= val;
- writel(dword, port);
+ write32(port, dword);
count = 50;
do {
- dword = readl(port);
+ dword = read32(port);
dword &= mask;
udelay(100);
} while ((dword != val) && --count);
@@ -73,23 +73,23 @@
uint32_t dword;
- dword = readl(base + 0x68);
+ dword = read32(base + 0x68);
dword=dword|(unsigned long)0x0002;
- writel(dword,base + 0x68);
+ write32(base + 0x68, dword);
do {
- dword = readl(base + 0x68);
+ dword = read32(base + 0x68);
} while ((dword & 1)!=0);
- writel(verb, base + 0x60);
+ write32(base + 0x60, verb);
udelay(500);
- dword = readl(base + 0x68);
+ dword = read32(base + 0x68);
dword =(dword |0x1);
- writel(dword, base + 0x68);
+ write32(base + 0x68, dword);
do {
udelay(100);
- dword = readl(base + 0x68);
+ dword = read32(base + 0x68);
} while ((dword & 3) != 2);
- dword = readl(base + 0x64);
+ dword = read32(base + 0x64);
return dword;
}
@@ -106,7 +106,7 @@
set_bits(base + 0x08, 1, 1);
do{
- dword = readl(base + 0x08)&0x1;
+ dword = read32(base + 0x08)&0x1;
if(idx++>1000) { printk_debug("controller reset fail !!! \n"); break;}
} while (dword !=1);
@@ -206,17 +206,17 @@
/* 1 */
do {
- dword = readl(base + 0x68);
+ dword = read32(base + 0x68);
} while (dword & 1);
dword = (addr<<28) | 0x000f0000;
- writel(dword, base + 0x60);
+ write32(base + 0x60, dword);
do {
- dword = readl(base + 0x68);
+ dword = read32(base + 0x68);
} while ((dword & 3)!=2);
- dword = readl(base + 0x64);
+ dword = read32(base + 0x64);
/* 2 */
printk_debug("codec viddid: %08x\n", dword);
Modified: trunk/src/southbridge/sis/sis966/sis966_nic.c
===================================================================
--- trunk/src/southbridge/sis/sis966/sis966_nic.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/sis/sis966/sis966_nic.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -144,13 +144,13 @@
ulValue = (0x80 | (0x2 << 8) | (Reg << 10)); //BIT_7
- writel( ulValue,base+0x3c);
+ write32(base+0x3c, ulValue);
mdelay(10);
for(i=0 ; i <= LoopNum; i++)
{
- ulValue=readl(base+0x3c);
+ ulValue=read32(base+0x3c);
if(!(ulValue & 0x0080)) //BIT_7
break;
@@ -162,7 +162,7 @@
if(i==LoopNum) data=0x10000;
else{
- ulValue=readl(base+0x3c);
+ ulValue=read32(base+0x3c);
data = ((ulValue & 0xffff0000) >> 16);
}
@@ -183,14 +183,14 @@
SMI_REQUEST);
// SmiMgtInterface Reg is the SMI management interface register(offset 44h) of MAC
- writel( Read_Cmd,base+0x44);
+ write32(base+0x44, Read_Cmd);
// Polling SMI_REQ bit to be deasserted indicated read command completed
do
{
// Wait 20 usec before checking status
mdelay(20);
- ulValue = readl(base+0x44);
+ ulValue = read32(base+0x44);
} while((ulValue & SMI_REQUEST) != 0);
//printk_debug("base %x cmd %lx ret val %lx\n", tmp,Read_Cmd,ulValue);
usData=(ulValue>>16);
@@ -282,7 +282,7 @@
return;
}
- ulValue=readl(base + 0x38L); // check EEPROM existing
+ ulValue=read32(base + 0x38L); // check EEPROM existing
if((ulValue & 0x0002))
{
@@ -303,9 +303,9 @@
}else{
// read MAC address from firmware
printk_debug("EEPROM invalid!!\nReg 0x38h=%.8lx \n",ulValue);
- MacAddr[0]=readw(0xffffffc0); // mac address store at here
- MacAddr[1]=readw(0xffffffc2);
- MacAddr[2]=readw(0xffffffc4);
+ MacAddr[0]=read16(0xffffffc0); // mac address store at here
+ MacAddr[1]=read16(0xffffffc2);
+ MacAddr[2]=read16(0xffffffc4);
}
set_apc(dev);
Modified: trunk/src/southbridge/sis/sis966/sis966_usb2.c
===================================================================
--- trunk/src/southbridge/sis/sis966/sis966_usb2.c 2010-01-16 17:50:55 UTC (rev 5021)
+++ trunk/src/southbridge/sis/sis966/sis966_usb2.c 2010-01-16 17:53:38 UTC (rev 5022)
@@ -96,7 +96,7 @@
base =(uint8_t *) res->base;
printk_debug("base = %08x\n", base);
- writel(0x2,base+0x20);
+ write32(base+0x20, 0x2);
//-----------------------------------------------------------
#if DEBUG_USB2
