coreboot September 2009

coreboot@coreboot.org

62 participants
305 discussions

[v2] r4659 - in trunk/coreboot-v2: . src/arch/i386
by svn＠coreboot.org 23 Sep '09

23 Sep '09

Author: myles Date: 2009-09-23 19:48:28 +0200 (Wed, 23 Sep 2009) New Revision: 4659 Modified: trunk/coreboot-v2/Makefile trunk/coreboot-v2/src/arch/i386/Makefile.inc Log: Separate payload compression from stage compression. Signed-off-by: Myles Watson <mylesgw(a)gmail.com> Acked-by: Peter Stuge <peter(a)stuge.se> Modified: trunk/coreboot-v2/Makefile =================================================================== --- trunk/coreboot-v2/Makefile 2009-09-22 22:08:47 UTC (rev 4658) +++ trunk/coreboot-v2/Makefile 2009-09-23 17:48:28 UTC (rev 4659) @@ -236,9 +236,10 @@ CFLAGS += -Werror-implicit-function-declaration -Wstrict-aliasing -Wshadow CFLAGS += -fno-common -ffreestanding -fno-builtin -fomit-frame-pointer -CBFS_COMPRESS_FLAG:= +CBFS_COMPRESS_FLAG:=l +CBFS_PAYLOAD_COMPRESS_FLAG:= ifeq ($(CONFIG_COMPRESSED_PAYLOAD_LZMA),y) -CBFS_COMPRESS_FLAG:=l +CBFS_PAYLOAD_COMPRESS_FLAG:=l endif coreboot: prepare prepare2 $(obj)/coreboot.rom Modified: trunk/coreboot-v2/src/arch/i386/Makefile.inc =================================================================== --- trunk/coreboot-v2/src/arch/i386/Makefile.inc 2009-09-22 22:08:47 UTC (rev 4658) +++ trunk/coreboot-v2/src/arch/i386/Makefile.inc 2009-09-23 17:48:28 UTC (rev 4659) @@ -25,7 +25,7 @@ @printf " PAYLOAD none (as specified by user)\n" else @printf " PAYLOAD $(CONFIG_FALLBACK_PAYLOAD_FILE) $(COMPRESSFLAG)\n" - $(CBFSTOOL) ./build/coreboot.rom add-payload $(CONFIG_FALLBACK_PAYLOAD_FILE) fallback/payload $(CBFS_COMPRESS_FLAG) + $(CBFSTOOL) ./build/coreboot.rom add-payload $(CONFIG_FALLBACK_PAYLOAD_FILE) fallback/payload $(CBFS_PAYLOAD_COMPRESS_FLAG) ifeq ($(CONFIG_VGA_BIOS),y) @printf " VGABIOS $(CONFIG_FALLBACK_VGA_BIOS_FILE) $(CONFIG_FALLBACK_VGA_BIOS_ID)\n" $(CBFSTOOL) ./build/coreboot.rom add $(CONFIG_FALLBACK_VGA_BIOS_FILE) "pci$(CONFIG_FALLBACK_VGA_BIOS_ID).rom" optionrom

1 0

[PATCH] FILO: parse old ext2 revisions correctly
by Daniel Mack 23 Sep '09

23 Sep '09

This patch applies against r104 of filo and allows older versions of ext2 file systems to be accessed. The problem with the current code is that EXT2_INODE_SIZE() returns 0 for these file systems and the EXT2_INODES_PER_BLOCK() uses that value in a calculation which causes a div0 and sends the machine to reboot. Below is a fix for that. Signed-off-by: Daniel Mack <daniel(a)caiaq.de> Index: fs/fsys_ext2fs.c =================================================================== --- fs/fsys_ext2fs.c (revision 105) +++ fs/fsys_ext2fs.c (working copy) @@ -253,10 +253,18 @@ ((char *)((char *)DATABLOCK1 + EXT2_BLOCK_SIZE(SUPERBLOCK))) /* linux/ext2_fs.h */ + +#define EXT2_OLD_REV 0 /* The good old (original) format */ +#define EXT2_DYNAMIC_REV 1 /* V2 format w/ dynamic inode sizes */ + +#define EXT2_OLD_INODE_SIZE 128 + #define EXT2_ADDR_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / sizeof (__u32)) #define EXT2_ADDR_PER_BLOCK_BITS(s) (log2(EXT2_ADDR_PER_BLOCK(s))) -#define EXT2_INODE_SIZE(s) (SUPERBLOCK->s_inode_size) +#define EXT2_INODE_SIZE(s) (((s)->s_rev_level == EXT2_OLD_REV) ? \ + EXT2_OLD_INODE_SIZE : (s)->s_inode_size) + #define EXT2_INODES_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s)/EXT2_INODE_SIZE(s)) /* linux/ext2_fs.h */ @@ -287,6 +295,7 @@ printf(" b_free=%d\n", le32_to_cpu(s->s_free_blocks_count)); printf(" first=%d\n", le32_to_cpu(s->s_first_data_block)); printf(" log_b_size=%d, b_size=%d\n", le32_to_cpu(s->s_log_block_size), EXT2_BLOCK_SIZE(s)); + printf(" inode_size=%d\n", le32_to_cpu(EXT2_INODE_SIZE(s))); printf(" log_f_size=%d\n", le32_to_cpu(s->s_log_frag_size)); printf(" bpg=%d\n", le32_to_cpu(s->s_blocks_per_group)); printf(" fpg=%d\n", le32_to_cpu(s->s_frags_per_group)); ----- End forwarded message -----

2 1

[FILO] r106 - trunk/filo/fs
by svn＠coreboot.org 23 Sep '09

23 Sep '09

Author: stuge Date: 2009-09-23 16:12:31 +0200 (Wed, 23 Sep 2009) New Revision: 106 Modified: trunk/filo/fs/fsys_ext2fs.c Log: Fix EXT2_INODE_SIZE() for original format ext2 filesystems This patch applies against r104 of filo and allows older versions of ext2 file systems to be accessed. The problem with the current code is that EXT2_INODE_SIZE() returns 0 for these file systems and the EXT2_INODES_PER_BLOCK() uses that value in a calculation which causes a div0 and sends the machine to reboot. Below is a fix for that. Signed-off-by: Daniel Mack <daniel(a)caiaq.de> Acked-by: Peter Stuge <peter(a)stuge.se> Modified: trunk/filo/fs/fsys_ext2fs.c =================================================================== --- trunk/filo/fs/fsys_ext2fs.c 2009-08-27 22:52:37 UTC (rev 105) +++ trunk/filo/fs/fsys_ext2fs.c 2009-09-23 14:12:31 UTC (rev 106) @@ -253,10 +253,16 @@ ((char *)((char *)DATABLOCK1 + EXT2_BLOCK_SIZE(SUPERBLOCK))) /* linux/ext2_fs.h */ +#define EXT2_OLD_REV 0 /* The good old (original) format */ +#define EXT2_DYNAMIC_REV 1 /* V2 format w/ dynamic inode sizes */ + +#define EXT2_OLD_INODE_SIZE 128 + #define EXT2_ADDR_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / sizeof (__u32)) #define EXT2_ADDR_PER_BLOCK_BITS(s) (log2(EXT2_ADDR_PER_BLOCK(s))) -#define EXT2_INODE_SIZE(s) (SUPERBLOCK->s_inode_size) +#define EXT2_INODE_SIZE(s) (((s)->s_rev_level == EXT2_OLD_REV) ? \ + EXT2_OLD_INODE_SIZE : (s)->s_inode_size) #define EXT2_INODES_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s)/EXT2_INODE_SIZE(s)) /* linux/ext2_fs.h */ @@ -287,6 +293,7 @@ printf(" b_free=%d\n", le32_to_cpu(s->s_free_blocks_count)); printf(" first=%d\n", le32_to_cpu(s->s_first_data_block)); printf(" log_b_size=%d, b_size=%d\n", le32_to_cpu(s->s_log_block_size), EXT2_BLOCK_SIZE(s)); + printf(" inode_size=%d\n", le32_to_cpu(EXT2_INODE_SIZE(s))); printf(" log_f_size=%d\n", le32_to_cpu(s->s_log_frag_size)); printf(" bpg=%d\n", le32_to_cpu(s->s_blocks_per_group)); printf(" fpg=%d\n", le32_to_cpu(s->s_frags_per_group));

1 0

[PATCH] buildrom/filo build fix
by Daniel Mack 23 Sep '09

23 Sep '09

buildrom does not currently build filo due to a missing include path. This fixes it. --- Index: Makefile =================================================================== --- Makefile (revision 94) +++ Makefile (working copy) @@ -76,7 +76,7 @@ LIBGCC = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) OBJS := $(patsubst %,$(obj)/%,$(TARGETS-y)) -INCLUDES := -I$(INCPAYLOAD) -Iinclude -I$(ARCHDIR-y)/include -Ibuild +INCLUDES := -I$(INCPAYLOAD) -I$(INCPAYLOAD)/$(ARCHDIR-y) -Iinclude -I$(ARCHDIR-y)/include -Ibuild INCLUDES += -I$(GCCINCDIR) try-run= $(shell set -e; \

3 3

[BuildROM] r275 - buildrom-devel/packages/filo
by svn＠coreboot.org 23 Sep '09

23 Sep '09

Author: myles Date: 2009-09-23 05:07:31 +0200 (Wed, 23 Sep 2009) New Revision: 275 Modified: buildrom-devel/packages/filo/filo.mk Log: Bump the revision of filo to include CBFS support. Signed-off-by: Myles Watson <mylesgw(a)gmail.com> Acked-by: Myles Watson <mylesgw(a)gmail.com> Modified: buildrom-devel/packages/filo/filo.mk =================================================================== --- buildrom-devel/packages/filo/filo.mk 2009-09-18 19:47:06 UTC (rev 274) +++ buildrom-devel/packages/filo/filo.mk 2009-09-23 03:07:31 UTC (rev 275) @@ -1,5 +1,5 @@ FILO_URL=svn://coreboot.org/filo/trunk/filo -FILO_TAG=94 +FILO_TAG=105 FILO_DIR=$(BUILD_DIR)/filo FILO_SRC_DIR=$(FILO_DIR)/svn

1 0

build service results for r4658
by coreboot information 22 Sep '09

22 Sep '09

Dear coreboot readers! This is the automatic build system of coreboot. The developer "myles" checked in revision 4658 to the coreboot repository. This caused the following changes: Change Log: Fix compilation for serengeti when HAVE_ACPI_TABLES is set. Trivial. Signed-off-by: Myles Watson <mylesgw(a)gmail.com> Acked-by: Myles Watson <mylesgw(a)gmail.com> Build Log: Compilation of embeddedplanet:ep405pc is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4658&device=ep405pc&vendor… Compilation of motorola:sandpointx3_altimus_mpc7410 is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4658&device=sandpointx3_al… Compilation of totalimpact:briq is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4658&device=briq&vendor=to… If something broke during this checkin please be a pain in myles's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

[v2] r4658 - trunk/coreboot-v2/src/mainboard/amd/serengeti_cheetah
by svn＠coreboot.org 22 Sep '09

22 Sep '09

Author: myles Date: 2009-09-23 00:08:47 +0200 (Wed, 23 Sep 2009) New Revision: 4658 Modified: trunk/coreboot-v2/src/mainboard/amd/serengeti_cheetah/Makefile.inc Log: Fix compilation for serengeti when HAVE_ACPI_TABLES is set. Trivial. Signed-off-by: Myles Watson <mylesgw(a)gmail.com> Acked-by: Myles Watson <mylesgw(a)gmail.com> Modified: trunk/coreboot-v2/src/mainboard/amd/serengeti_cheetah/Makefile.inc =================================================================== --- trunk/coreboot-v2/src/mainboard/amd/serengeti_cheetah/Makefile.inc 2009-09-22 21:29:32 UTC (rev 4657) +++ trunk/coreboot-v2/src/mainboard/amd/serengeti_cheetah/Makefile.inc 2009-09-22 22:08:47 UTC (rev 4658) @@ -32,7 +32,7 @@ # ./ssdt.o is in northbridge/amd/amdk8/Config.lb obj-$(CONFIG_ACPI_SSDTX_NUM) += ssdt2.o obj-$(CONFIG_ACPI_SSDTX_NUM) += ssdt3.o -obj-$(CONFIG_HAVE_ACPI_TABLES) += ssdt4.o +obj-$(CONFIG_ACPI_SSDTX_NUM) += ssdt4.o driver-y += ../../../drivers/i2c/i2cmux/i2cmux.o # This is part of the conversion to init-obj and away from included code. @@ -59,8 +59,8 @@ -DCONFIG_USE_PRINTK_IN_CAR=1 \ -DCONFIG_HAVE_HIGH_TABLES=1 -$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl - iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl +$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/dsdt_lb.dsl + iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dx/dsdt_lb.dsl mv dsdt.hex $@ $(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c

1 0

build service results for r4657
by coreboot information 22 Sep '09

22 Sep '09

Dear coreboot readers! This is the automatic build system of coreboot. The developer "myles" checked in revision 4657 to the coreboot repository. This caused the following changes: Change Log: src/Kconfig: Remove HT-specific options. src/cpu/amd/socket_F/Kconfig: Remove second occurrence of CPU_SOCKET_TYPE. src/mainboard/amd/serengeti_cheetah/Kconfig: Add HT_CHAIN_UNITID_BASE here, since it is board specific. src/mainboard/tyan/s289X/Kconfig: Fix typo and change APIC_ID_OFFSET to match old config. src/devices/Kconfig: Change default value of *_PLUGIN_SUPPORT to match old config. src/southbridge/amd/amd8131/Makefile.inc: Remove check since it was a typo, and the correct variable is checked in the parent directory. src/Makefile:Use devicetree.cb instead of Config.lb to generate static.c. Signed-off-by: Myles Watson <mylesgw(a)gmail.com> Acked-by: Ronald G. Minnich <rminnich(a)gmail.com> Build Log: Compilation of embeddedplanet:ep405pc is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4657&device=ep405pc&vendor… Compilation of motorola:sandpointx3_altimus_mpc7410 is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4657&device=sandpointx3_al… Compilation of totalimpact:briq is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4657&device=briq&vendor=to… If something broke during this checkin please be a pain in myles's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

Another Kconfig patch
by Myles Watson 22 Sep '09

22 Sep '09

This one lets me boot my s2895 to Linux. The problem was that the AMD 8131 southbridge Makefile.inc depended on a typo and never got built. This patch changes a few things that may be controversial, thanks for reviewing. src/Kconfig: Remove HT-specific options. src/cpu/amd/socket_F/Kconfig: Remove second occurrence of CPU_SOCKET_TYPE. src/mainboard/amd/serengeti_cheetah/Kconfig: Add HT_CHAIN_UNITID_BASE here, since it is board specific. src/mainboard/tyan/s289X/Kconfig: Fix typo and change APIC_ID_OFFSET to match old config. src/devices/Kconfig: Change default value of *_PLUGIN_SUPPORT to match old config. src/southbridge/amd/amd8131/Makefile.inc: Remove check since it was a typo, and the correct variable is checked in the parent directory. src/Makefile:Use devicetree.cb instead of Config.lb to generate static.c. Signed-off-by: Myles Watson <mylesgw(a)gmail.com> Thanks, Myles

2 2

[v2] r4657 - in trunk/coreboot-v2: . src src/cpu/amd/socket_F src/devices src/mainboard/amd/serengeti_cheetah src/mainboard/tyan/s2891 src/mainboard/tyan/s2892 src/mainboard/tyan/s2895 src/southbridge/amd/amd8131
by svn＠coreboot.org 22 Sep '09

22 Sep '09

Author: myles Date: 2009-09-22 23:29:32 +0200 (Tue, 22 Sep 2009) New Revision: 4657 Modified: trunk/coreboot-v2/Makefile trunk/coreboot-v2/src/Kconfig trunk/coreboot-v2/src/cpu/amd/socket_F/Kconfig trunk/coreboot-v2/src/devices/Kconfig trunk/coreboot-v2/src/mainboard/amd/serengeti_cheetah/Kconfig trunk/coreboot-v2/src/mainboard/tyan/s2891/Kconfig trunk/coreboot-v2/src/mainboard/tyan/s2892/Kconfig trunk/coreboot-v2/src/mainboard/tyan/s2895/Kconfig trunk/coreboot-v2/src/southbridge/amd/amd8131/Makefile.inc Log: src/Kconfig: Remove HT-specific options. src/cpu/amd/socket_F/Kconfig: Remove second occurrence of CPU_SOCKET_TYPE. src/mainboard/amd/serengeti_cheetah/Kconfig: Add HT_CHAIN_UNITID_BASE here, since it is board specific. src/mainboard/tyan/s289X/Kconfig: Fix typo and change APIC_ID_OFFSET to match old config. src/devices/Kconfig: Change default value of *_PLUGIN_SUPPORT to match old config. src/southbridge/amd/amd8131/Makefile.inc: Remove check since it was a typo, and the correct variable is checked in the parent directory. src/Makefile:Use devicetree.cb instead of Config.lb to generate static.c. Signed-off-by: Myles Watson <mylesgw(a)gmail.com> Acked-by: Ronald G. Minnich <rminnich(a)gmail.com> Modified: trunk/coreboot-v2/Makefile =================================================================== --- trunk/coreboot-v2/Makefile 2009-09-22 18:53:50 UTC (rev 4656) +++ trunk/coreboot-v2/Makefile 2009-09-22 21:29:32 UTC (rev 4657) @@ -111,7 +111,7 @@ # needed objects that every mainboard uses # Creation of these is architecture and mainboard independent -$(obj)/mainboard/$(MAINBOARDDIR)/static.c: $(src)/mainboard/$(MAINBOARDDIR)/Config.lb $(obj)/mainboard/$(MAINBOARDDIR)/config.py +$(obj)/mainboard/$(MAINBOARDDIR)/static.c: $(src)/mainboard/$(MAINBOARDDIR)/devicetree.cb $(obj)/mainboard/$(MAINBOARDDIR)/config.py mkdir -p $(obj)/mainboard/$(MAINBOARDDIR) (cd $(obj)/mainboard/$(MAINBOARDDIR) ; PYTHONPATH=$(top)/util/sconfig export PYTHONPATH; python config.py $(MAINBOARDDIR) $(top) $(obj)/mainboard/$(MAINBOARDDIR)) Modified: trunk/coreboot-v2/src/Kconfig =================================================================== --- trunk/coreboot-v2/src/Kconfig 2009-09-22 18:53:50 UTC (rev 4656) +++ trunk/coreboot-v2/src/Kconfig 2009-09-22 21:29:32 UTC (rev 4657) @@ -84,14 +84,6 @@ bool default n -config HT_CHAIN_UNITID_BASE - hex - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - config HEAP_SIZE hex default 0x2000 Modified: trunk/coreboot-v2/src/cpu/amd/socket_F/Kconfig =================================================================== --- trunk/coreboot-v2/src/cpu/amd/socket_F/Kconfig 2009-09-22 18:53:50 UTC (rev 4656) +++ trunk/coreboot-v2/src/cpu/amd/socket_F/Kconfig 2009-09-22 21:29:32 UTC (rev 4657) @@ -24,8 +24,3 @@ default 0x0104 depends on CPU_AMD_SOCKET_F -config CPU_SOCKET_TYPE - hex - default 0x10 - depends on CPU_AMD_SOCKET_F - Modified: trunk/coreboot-v2/src/devices/Kconfig =================================================================== --- trunk/coreboot-v2/src/devices/Kconfig 2009-09-22 18:53:50 UTC (rev 4656) +++ trunk/coreboot-v2/src/devices/Kconfig 2009-09-22 21:29:32 UTC (rev 4657) @@ -79,20 +79,20 @@ config HYPERTRANSPORT_PLUGIN_SUPPORT bool - default n + default y config PCIX_PLUGIN_SUPPORT bool - default n + default y config PCIEXP_PLUGIN_SUPPORT bool - default n + default y config AGP_PLUGIN_SUPPORT bool - default n + default y config CARDBUS_PLUGIN_SUPPORT bool - default n + default y Modified: trunk/coreboot-v2/src/mainboard/amd/serengeti_cheetah/Kconfig =================================================================== --- trunk/coreboot-v2/src/mainboard/amd/serengeti_cheetah/Kconfig 2009-09-22 18:53:50 UTC (rev 4656) +++ trunk/coreboot-v2/src/mainboard/amd/serengeti_cheetah/Kconfig 2009-09-22 21:29:32 UTC (rev 4657) @@ -119,6 +119,11 @@ default 0x6 depends on BOARD_AMD_SERENGETI_CHEETAH +config HT_CHAIN_UNITID_BASE + hex + default 0x1 + depends on BOARD_AMD_SERENGETI_CHEETAH + config USE_INIT bool default n Modified: trunk/coreboot-v2/src/mainboard/tyan/s2891/Kconfig =================================================================== --- trunk/coreboot-v2/src/mainboard/tyan/s2891/Kconfig 2009-09-22 18:53:50 UTC (rev 4656) +++ trunk/coreboot-v2/src/mainboard/tyan/s2891/Kconfig 2009-09-22 21:29:32 UTC (rev 4657) @@ -17,7 +17,7 @@ config APIC_ID_OFFSET hex - default 8 + default 0x10 depends on BOARD_TYAN_S2891 config SB_HT_CHAIN_ON_BUS0 @@ -40,7 +40,7 @@ default "s2891" depends on BOARD_TYAN_S2891 -config CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID hex default 0x2891 depends on BOARD_TYAN_S2891 Modified: trunk/coreboot-v2/src/mainboard/tyan/s2892/Kconfig =================================================================== --- trunk/coreboot-v2/src/mainboard/tyan/s2892/Kconfig 2009-09-22 18:53:50 UTC (rev 4656) +++ trunk/coreboot-v2/src/mainboard/tyan/s2892/Kconfig 2009-09-22 21:29:32 UTC (rev 4657) @@ -17,7 +17,7 @@ config APIC_ID_OFFSET hex - default 8 + default 0x10 depends on BOARD_TYAN_S2892 config SB_HT_CHAIN_ON_BUS0 @@ -40,7 +40,7 @@ default "s2892" depends on BOARD_TYAN_S2892 -config CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID hex default 0x2892 depends on BOARD_TYAN_S2892 Modified: trunk/coreboot-v2/src/mainboard/tyan/s2895/Kconfig =================================================================== --- trunk/coreboot-v2/src/mainboard/tyan/s2895/Kconfig 2009-09-22 18:53:50 UTC (rev 4656) +++ trunk/coreboot-v2/src/mainboard/tyan/s2895/Kconfig 2009-09-22 21:29:32 UTC (rev 4657) @@ -17,7 +17,7 @@ config APIC_ID_OFFSET hex - default 8 + default 0x10 depends on BOARD_TYAN_S2895 config SB_HT_CHAIN_ON_BUS0 @@ -40,7 +40,7 @@ default "s2895" depends on BOARD_TYAN_S2895 -config CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID hex default 0x2895 depends on BOARD_TYAN_S2895 Modified: trunk/coreboot-v2/src/southbridge/amd/amd8131/Makefile.inc =================================================================== --- trunk/coreboot-v2/src/southbridge/amd/amd8131/Makefile.inc 2009-09-22 18:53:50 UTC (rev 4656) +++ trunk/coreboot-v2/src/southbridge/amd/amd8131/Makefile.inc 2009-09-22 21:29:32 UTC (rev 4657) @@ -1 +1 @@ -driver-$(SOUTHBRIDGE_AMD_AMD8131) += amd8131_bridge.o \ No newline at end of file +driver-y += amd8131_bridge.o

1 0

← Newer
1
...
16
17
18
19
20
21
22
...
31
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot September 2009