Author: oxygene
Date: 2009-04-03 14:55:55 +0200 (Fri, 03 Apr 2009)
New Revision: 4050
Removed:
trunk/coreboot-v2/src/mainboard/tyan/s2735/auto.c
trunk/coreboot-v2/src/mainboard/tyan/s2735/failover.c
trunk/coreboot-v2/src/mainboard/tyan/s2850/auto.c
trunk/coreboot-v2/src/mainboard/tyan/s2850/failover.c
trunk/coreboot-v2/src/mainboard/tyan/s2875/auto.c
trunk/coreboot-v2/src/mainboard/tyan/s2875/failover.c
trunk/coreboot-v2/src/mainboard/tyan/s2880/auto.c
trunk/coreboot-v2/src/mainboard/tyan/s2880/failover.c
trunk/coreboot-v2/src/mainboard/tyan/s2881/auto.c
trunk/coreboot-v2/src/mainboard/tyan/s2881/failover.c
trunk/coreboot-v2/src/mainboard/tyan/s2882/auto.c
trunk/coreboot-v2/src/mainboard/tyan/s2882/failover.c
trunk/coreboot-v2/src/mainboard/tyan/s2885/auto.c
trunk/coreboot-v2/src/mainboard/tyan/s2885/failover.c
trunk/coreboot-v2/src/mainboard/tyan/s2891/auto.c
trunk/coreboot-v2/src/mainboard/tyan/s2891/failover.c
trunk/coreboot-v2/src/mainboard/tyan/s2892/auto.c
trunk/coreboot-v2/src/mainboard/tyan/s2892/failover.c
trunk/coreboot-v2/src/mainboard/tyan/s2895/auto.c
trunk/coreboot-v2/src/mainboard/tyan/s2895/failover.c
Modified:
trunk/coreboot-v2/src/mainboard/tyan/s2875/Config.lb
trunk/coreboot-v2/src/mainboard/tyan/s2880/Config.lb
trunk/coreboot-v2/src/mainboard/tyan/s2881/Config.lb
trunk/coreboot-v2/src/mainboard/tyan/s2882/Config.lb
trunk/coreboot-v2/src/mainboard/tyan/s2885/Config.lb
Log:
Next step. Kill auto.c and failover.c and clean up Config.lb for
tyan/s2735
tyan/s2850
tyan/s2875
tyan/s2880
tyan/s2881
tyan/s2882
tyan/s2885
tyan/s2891
tyan/s2892
tyan/s2895
Abuild log is completely identical with and without the patch.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Acked-by: Stefan Reinauer <stepan(a)coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi(a)coresystems.de>
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2735/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2735/auto.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2735/auto.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,145 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-
-#include "arch/i386/lib/console.c"
-
-#include "ram/ramtest.c"
-#include "southbridge/intel/i82801er/i82801er_early_smbus.c"
-#include "northbridge/intel/e7501/raminit.h"
-#if 0
-#include "cpu/intel/model_f2x/apic_timer.c"
-#include "lib/delay.c"
-#endif
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/intel/e7501/debug.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-static void hard_reset(void)
-{
- outb(0x0e, 0x0cf9);
-}
-
-static void memreset_setup(void)
-{
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-
-#include "northbridge/intel/e7501/raminit.c"
-#include "northbridge/intel/e7501/reset_test.c"
-#include "sdram/generic_sdram.c"
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller memctrl[] = {
- {
- .d0 = PCI_DEV(0, 0, 0),
- .d0f1 = PCI_DEV(0, 0, 1),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|1, (0xa<<3)|2, 0 },
- .channel1 = { (0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, 0 },
- },
- };
-
- if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- early_mtrr_init();
- enable_lapic();
-// init_timer();
-
- }
-
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
-// report_bist_failure(bist);
-
-// setup_default_resource_map();
-#if 0
- print_pci_devices();
-#endif
- if(!bios_reset_detected()) {
- enable_smbus();
-#if 0
- dump_spd_registers(&memctrl[0]);
-// dump_smbus_registers();
-#endif
-
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(memctrl), memctrl);
- }
-#if 0
- else {
- /* clear memory 1meg */
- __asm__ volatile(
- "1: \n\t"
- "movl %0, %%fs:(%1)\n\t"
- "addl $4,%1\n\t"
- "subl $4,%2\n\t"
- "jnz 1b\n\t"
- :
- : "a" (0), "D" (0), "c" (1024*1024)
- );
-
- }
-#endif
-
-#if 0
- dump_pci_devices();
-#endif
-#if 1
- dump_pci_device(PCI_DEV(0, 0, 0));
-#endif
-
-#if 0
- msr_t msr;
- msr = rdmsr(TOP_MEM2);
- print_debug("TOP_MEM2: ");
- print_debug_hex32(msr.hi);
- print_debug_hex32(msr.lo);
- print_debug("\r\n");
-#endif
-
-#if 0
- ram_check(0x00000000, msr.lo+(msr.hi<<32));
-#endif
-
-#if 0
- // Check 16MB of memory @ 0
- ram_check(0x00000000, 0x01000000);
- // Check 16MB of memory @ 2GB
-// ram_check(0x80000000, 0x81000000);
-#endif
-
-}
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2735/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2735/failover.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2735/failover.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,47 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/intel/i82801er/cmos_failover.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/intel/e7501/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else {
-
- check_cmos_failed();
-
- if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
-#if 0
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
-#endif
- fallback_image:
- return bist;
-}
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2850/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2850/auto.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2850/auto.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,203 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
- unsigned reg;
-
- for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
- unsigned config_map;
- config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
- if ((config_map & 3) != 3) {
- continue;
- }
- if ((((config_map >> 4) & 7) == node) &&
- (((config_map >> 8) & 3) == link))
- {
- return (config_map >> 16) & 0xff;
- }
- }
- return 0;
-}
-
-static void hard_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3);
-
- set_bios_reset();
-
- /* enable cf9 */
- pci_write_config8(dev, 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0);
-
- set_bios_reset();
- pci_write_config8(dev, 0x47, 1);
-}
-
-#define REV_B_RESET 0
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | (0 << 0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- } else {
- outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | (1 << 0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) |
- (0 << 0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- outb((0 << 7) | (0 << 6) | (0 << 5) | (0 << 4) | (1 << 2) | (1 << 0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
- udelay(90);
- }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#include "cpu/amd/dualcore/dualcore.c"
-#endif
-
-static void main(unsigned long bist)
-{
- /*
- * GPIO28 of 8111 will control H0_MEMRESET_L
- * GPIO29 of 8111 will control H1_MEMRESET_L
- */
- static const struct mem_controller cpu[] = {
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = {(0xa << 3) | 0, (0xa << 3) | 2, 0, 0},
- .channel1 = {(0xa << 3) | 1, (0xa << 3) | 3, 0, 0},
- },
- };
-
- int needs_reset;
-
-#if CONFIG_LOGICAL_CPUS==1
- struct node_core_id id;
-#else
- unsigned nodeid;
-#endif
-
- if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- amd_early_mtrr_init();
-
-#if CONFIG_LOGICAL_CPUS==1
- set_apicid_cpuid_lo();
-#endif
-
- enable_lapic();
- init_timer();
-
-#if CONFIG_LOGICAL_CPUS==1
- id = get_node_core_id_x();
- if(id.coreid == 0) {
- if (cpu_init_detected(id.nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(id.nodeid);
- }
-#else
- nodeid = lapicid();
- if (cpu_init_detected(nodeid)) {
- asm volatile ("jmp __cpu_reset");
- }
- distinguish_cpu_resets(nodeid);
-#endif
-
- if (!boot_cpu()
-#if CONFIG_LOGICAL_CPUS==1
- || (id.coreid != 0)
-#endif
- ) {
- stop_this_cpu();
- }
- }
-
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_default_resource_map();
- needs_reset = setup_coherent_ht_domain();
-#if CONFIG_LOGICAL_CPUS==1
- start_other_cores();
-#endif
- needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
- enable_smbus();
-
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2850/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2850/failover.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2850/failover.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,89 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif
-
-
-static unsigned long main(unsigned long bist)
-{
-#if CONFIG_LOGICAL_CPUS==1
- struct node_core_id id;
-#else
- unsigned nodeid;
-#endif
- /* Make cerain my local apic is useable */
- enable_lapic();
-
-#if CONFIG_LOGICAL_CPUS==1
- id = get_node_core_id_x();
- /* Is this a cpu only reset? */
- if (cpu_init_detected(id.nodeid)) {
-#else
- nodeid = lapicid();
- /* Is this a cpu only reset? */
- if (cpu_init_detected(nodeid)) {
-#endif
-
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto cpu_reset;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- cpu_reset:
-#if 0
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
-#endif
- fallback_image:
- return bist;
-}
Modified: trunk/coreboot-v2/src/mainboard/tyan/s2875/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2875/Config.lb 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2875/Config.lb 2009-04-03 12:55:55 UTC (rev 4050)
@@ -45,8 +45,6 @@
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
@@ -64,32 +62,7 @@
end
end
-else
-
##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
-##
## Build our 16 bit and 32 bit coreboot entry code
##
if USE_FALLBACK_IMAGE
@@ -99,7 +72,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -107,7 +79,6 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -120,24 +91,16 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -145,13 +108,8 @@
### failover to another image.
###
if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
-else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
end
-end
###
### O.k. We aren't just an intermediary anymore!
@@ -160,29 +118,13 @@
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
-
##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
-##
## Include the secondary Configuration files
##
config chip.h
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2875/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2875/auto.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2875/auto.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,173 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
- unsigned reg;
-
- for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
- unsigned config_map;
- config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
- if ((config_map & 3) != 3) {
- continue;
- }
- if ((((config_map >> 4) & 7) == node) &&
- (((config_map >> 8) & 3) == link))
- {
- return (config_map >> 16) & 0xff;
- }
- }
- return 0;
-}
-
-static void hard_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3);
-
- set_bios_reset();
-
- /* enable cf9 */
- pci_write_config8(dev, 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0);
-
- set_bios_reset();
- pci_write_config8(dev, 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
- udelay(90);
- }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
- .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
- },
-#endif
- };
-
- int needs_reset;
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
-
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_default_resource_map();
- needs_reset = setup_coherent_ht_domain();
-
- needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
- enable_smbus();
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2875/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2875/failover.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2875/failover.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,69 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif
-
-
-static unsigned long main(unsigned long bist)
-{
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Modified: trunk/coreboot-v2/src/mainboard/tyan/s2880/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2880/Config.lb 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2880/Config.lb 2009-04-03 12:55:55 UTC (rev 4050)
@@ -45,8 +45,6 @@
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
@@ -64,32 +62,7 @@
end
end
-else
-
##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
-##
## Build our 16 bit and 32 bit coreboot entry code
##
if USE_FALLBACK_IMAGE
@@ -99,7 +72,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -107,7 +79,6 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -120,24 +91,16 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -145,13 +108,8 @@
### failover to another image.
###
if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
-else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
end
-end
###
### O.k. We aren't just an intermediary anymore!
@@ -160,29 +118,13 @@
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
-
##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
-##
## Include the secondary Configuration files
##
config chip.h
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2880/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2880/auto.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2880/auto.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,173 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
- unsigned reg;
-
- for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
- unsigned config_map;
- config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
- if ((config_map & 3) != 3) {
- continue;
- }
- if ((((config_map >> 4) & 7) == node) &&
- (((config_map >> 8) & 3) == link))
- {
- return (config_map >> 16) & 0xff;
- }
- }
- return 0;
-}
-
-static void hard_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3);
-
- set_bios_reset();
-
- /* enable cf9 */
- pci_write_config8(dev, 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0);
-
- set_bios_reset();
- pci_write_config8(dev, 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
- udelay(90);
- }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-#include "northbridge/amd/amdk8/resourcemap.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#include "cpu/amd/dualcore/dualcore.c"
-#endif
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { (0xa<<3)|4, 0, 0, 0 },
- .channel1 = { (0xa<<3)|5, 0, 0, 0 },
- },
-#endif
- };
- int needs_reset;
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
-
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_default_resource_map();
- needs_reset = setup_coherent_ht_domain();
-
- needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
-}
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2880/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2880/failover.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2880/failover.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,68 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif
-
-
-static unsigned long main(unsigned long bist)
-{
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Modified: trunk/coreboot-v2/src/mainboard/tyan/s2881/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2881/Config.lb 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2881/Config.lb 2009-04-03 12:55:55 UTC (rev 4050)
@@ -44,7 +44,6 @@
object get_bus_conf.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
@@ -63,33 +62,7 @@
end
end
-else
-
-
##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
-##
## Build our 16 bit and 32 bit coreboot entry code
##
if USE_FALLBACK_IMAGE
@@ -99,7 +72,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -107,7 +79,6 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -120,24 +91,16 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -145,13 +108,8 @@
### failover to another image.
###
if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
-else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
end
-end
###
### O.k. We aren't just an intermediary anymore!
@@ -160,29 +118,13 @@
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
-
##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
-##
## Include the secondary Configuration files
##
config chip.h
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2881/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2881/auto.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2881/auto.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,178 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
- unsigned reg;
-
- for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
- unsigned config_map;
- config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
- if ((config_map & 3) != 3) {
- continue;
- }
- if ((((config_map >> 4) & 7) == node) &&
- (((config_map >> 8) & 3) == link))
- {
- return (config_map >> 16) & 0xff;
- }
- }
- return 0;
-}
-
-static void hard_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 3);
-
- set_bios_reset();
-
- /* enable cf9 */
- pci_write_config8(dev, 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 0);
-
- set_bios_reset();
- pci_write_config8(dev, 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
- udelay(90);
- }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-//#include "northbridge/amd/amdk8/setup_resource_map.c"
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
- /* tyan does not want the default */
-#include "resourcemap.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
- .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
- },
-#endif
- };
- int needs_reset;
-#if CONFIG_LOGICAL_CPUS==1
- struct node_core_id id;
-#else
- unsigned nodeid;
-#endif
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
-
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
-// report_bist_failure(bist);
-
- setup_s2881_resource_map();
- needs_reset = setup_coherent_ht_domain();
- // automatically set that for you, but you might meet tight space
- needs_reset |= ht_setup_chains_x();
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
- enable_smbus();
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2881/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2881/failover.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2881/failover.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,69 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif
-
-
-static unsigned long main(unsigned long bist)
-{
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Modified: trunk/coreboot-v2/src/mainboard/tyan/s2882/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2882/Config.lb 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2882/Config.lb 2009-04-03 12:55:55 UTC (rev 4050)
@@ -45,8 +45,6 @@
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
@@ -64,32 +62,7 @@
end
end
-else
-
##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
-##
## Build our 16 bit and 32 bit coreboot entry code
##
if USE_FALLBACK_IMAGE
@@ -99,7 +72,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -107,7 +79,6 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -120,24 +91,16 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -145,13 +108,8 @@
### failover to another image.
###
if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
-else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
end
-end
###
### O.k. We aren't just an intermediary anymore!
@@ -160,29 +118,13 @@
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
-
##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
-##
## Include the secondary Configuration files
##
config chip.h
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2882/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2882/auto.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2882/auto.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,182 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
- unsigned reg;
-
- for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
- unsigned config_map;
- config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
- if ((config_map & 3) != 3) {
- continue;
- }
- if ((((config_map >> 4) & 7) == node) &&
- (((config_map >> 8) & 3) == link))
- {
- return (config_map >> 16) & 0xff;
- }
- }
- return 0;
-}
-
-static void hard_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3);
-
- set_bios_reset();
-
- /* enable cf9 */
- pci_write_config8(dev, 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0);
-
- set_bios_reset();
- pci_write_config8(dev, 0x47, 1);
-}
-
-#define REV_B_RESET 0
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
- udelay(90);
- }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(unsigned long bist)
-{
- /*
- * GPIO28 of 8111 will control H0_MEMRESET_L
- * GPIO29 of 8111 will control H1_MEMRESET_L
- */
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
- .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
- },
-#endif
- };
-
- int needs_reset;
-#if CONFIG_LOGICAL_CPUS==1
- struct node_core_id id;
-#else
- unsigned nodeid;
-#endif
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
-
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
-// report_bist_failure(bist);
-
- setup_default_resource_map();
- needs_reset = setup_coherent_ht_domain();
- needs_reset |= ht_setup_chains_x();
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
- enable_smbus();
-
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2882/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2882/failover.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2882/failover.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,68 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif
-
-
-static unsigned long main(unsigned long bist)
-{
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Modified: trunk/coreboot-v2/src/mainboard/tyan/s2885/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2885/Config.lb 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2885/Config.lb 2009-04-03 12:55:55 UTC (rev 4050)
@@ -45,8 +45,6 @@
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
@@ -64,32 +62,7 @@
end
end
-else
-
##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
-##
## Build our 16 bit and 32 bit coreboot entry code
##
if USE_FALLBACK_IMAGE
@@ -99,7 +72,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -107,7 +79,6 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -120,24 +91,16 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -145,13 +108,8 @@
### failover to another image.
###
if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
-else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
end
-end
###
### O.k. We aren't just an intermediary anymore!
@@ -160,29 +118,13 @@
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
-
##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
-##
## Include the secondary Configuration files
##
config chip.h
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2885/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2885/auto.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2885/auto.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,186 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
- unsigned reg;
-
- for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
- unsigned config_map;
- config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
- if ((config_map & 3) != 3) {
- continue;
- }
- if ((((config_map >> 4) & 7) == node) &&
- (((config_map >> 8) & 3) == link))
- {
- return (config_map >> 16) & 0xff;
- }
- }
- return 0;
-}
-
-static void hard_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 3);
-
- set_bios_reset();
-
- /* enable cf9 */
- pci_write_config8(dev, 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 0);
-
- set_bios_reset();
- pci_write_config8(dev, 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
- udelay(90);
- }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-//#include "northbridge/amd/amdk8/setup_resource_map.c"
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-
-#if 0
- #define ENABLE_APIC_EXT_ID 1
- #define APIC_ID_OFFSET 0x10
- #define LIFT_BSP_APIC_ID 0
-#else
- #define ENABLE_APIC_EXT_ID 0
-#endif
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-/* tyan does not want the default */
-#include "resourcemap.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
- .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
- },
-#endif
- };
-
- int needs_reset;
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
-
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_s2885_resource_map();
- needs_reset = setup_coherent_ht_domain();
-
- // automatically set that for you, but you might meet tight space
- needs_reset |= ht_setup_chains_x();
-
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
- enable_smbus();
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-
-
-}
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2885/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2885/failover.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2885/failover.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,67 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#else
-#include "cpu/amd/model_fxx/node_id.c"
-#endif
-
-static unsigned long main(unsigned long bist)
-{
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- /* Is this a cpu only reset? */
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2891/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2891/auto.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2891/auto.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,151 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-
-#define K8_HT_FREQ_1G_SUPPORT 0
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/nvidia/ck804/ck804_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-static void hard_reset(void)
-{
- set_bios_reset();
-
- /* full reset */
- outb(0x0a, 0x0cf9);
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- set_bios_reset();
-#if 1
- /* link reset */
- outb(0x02, 0x0cf9);
- outb(0x06, 0x0cf9);
-#endif
-}
-
-static void memreset_setup(void)
-{
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-/* tyan does not want the default */
-#include "resourcemap.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-#define CK804_NUM 1
-#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
-#include "southbridge/nvidia/ck804/ck804_early_setup.c"
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
- .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
- },
-#endif
- };
-
- int needs_reset;
-#if CONFIG_LOGICAL_CPUS==1
- struct node_core_id id;
-#else
- unsigned nodeid;
-#endif
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
-
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_s2891_resource_map();
-
- needs_reset = setup_coherent_ht_domain();
-
- needs_reset |= ht_setup_chains_x();
-
- needs_reset |= ck804_early_setup_x();
-
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
- enable_smbus();
-
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2891/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2891/failover.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2891/failover.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,96 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-
-#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static void sio_setup(void)
-{
-
- unsigned value;
- uint32_t dword;
- uint8_t byte;
-
- byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
-
- dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
- dword |= (1<<0) | (1<<1);
- pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
-
-#if 1
- dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4);
- dword |= (1<<16);
- pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword);
-
-#endif
-
-}
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif
-
-static unsigned long main(unsigned long bist)
-{
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected(nodeid)) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the ck804 */
- ck804_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2892/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2892/auto.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2892/auto.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,153 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-
-#define K8_HT_FREQ_1G_SUPPORT 1
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/nvidia/ck804/ck804_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-static void hard_reset(void)
-{
- set_bios_reset();
-
- /* full reset */
- outb(0x0a, 0x0cf9);
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- set_bios_reset();
-#if 1
- /* link reset */
- outb(0x02, 0x0cf9);
- outb(0x06, 0x0cf9);
-#endif
-}
-
-static void memreset_setup(void)
-{
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-/* tyan does not want the default */
-#include "resourcemap.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-#define CK804_NUM 1
-#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
-//set GPIO to input mode
-#define CK804_MB_SETUP \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \
-
-#include "southbridge/nvidia/ck804/ck804_early_setup.c"
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
- .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
- },
-#endif
- };
-
- int needs_reset;
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
-
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
-// report_bist_failure(bist);
-
- setup_s2892_resource_map();
-
- needs_reset = setup_coherent_ht_domain();
-
- needs_reset |= ht_setup_chains_x();
-
- needs_reset |= ck804_early_setup_x();
-
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
- enable_smbus();
-
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2892/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2892/failover.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2892/failover.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,90 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-
-#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static void sio_setup(void)
-{
-
- unsigned value;
- uint32_t dword;
- uint8_t byte;
-
- byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
-
- dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
- dword |= (1<<0);
- pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
-
-
-}
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif
-
-static unsigned long main(unsigned long bist)
-{
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the ck804 */
- ck804_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2895/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2895/auto.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2895/auto.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,178 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-
-//#define K8_HT_FREQ_1G_SUPPORT 1
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/nvidia/ck804/ck804_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "cpu/amd/model_fxx/model_fxx_msr.h"
-#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1)
-
-static void hard_reset(void)
-{
- set_bios_reset();
-
- /* full reset */
- outb(0x0a, 0x0cf9);
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- set_bios_reset();
-#if 1
- /* link reset */
- outb(0x02, 0x0cf9);
- outb(0x06, 0x0cf9);
-#endif
-}
-
-static void memreset_setup(void)
-{
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
-
-#define SUPERIO_GPIO_IO_BASE 0x400
-
-static void sio_gpio_setup(void){
-
- unsigned value;
-
-// lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); // Already enable in failover.c
- lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L
- value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c);
- lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1)));
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-/* tyan does not want the default */
-#include "resourcemap.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-#define CK804_NUM 2
-#define CK804B_BUSN 0x80
-#define CK804_USE_NIC 1
-#define CK804_USE_ACI 1
-#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
-//set GPIO to input mode
-#define CK804_MB_SETUP \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/
-
-#include "southbridge/nvidia/ck804/ck804_early_setup.c"
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
- .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
- },
-#endif
- };
-
- int needs_reset;
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
-
- lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- sio_gpio_setup();
-
- setup_s2895_resource_map();
-
- needs_reset = setup_coherent_ht_domain();
-
- needs_reset |= ht_setup_chains_x();
-
- needs_reset |= ck804_early_setup_x();
-
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
- enable_smbus();
-
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
Deleted: trunk/coreboot-v2/src/mainboard/tyan/s2895/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2895/failover.c 2009-04-03 12:52:43 UTC (rev 4049)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2895/failover.c 2009-04-03 12:55:55 UTC (rev 4050)
@@ -1,108 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-
-#include <device/pnp_def.h>
-
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-
-#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
-#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
-
-#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
-
-#define SUPERIO_GPIO_IO_BASE 0x400
-
-static void sio_setup(void)
-{
-
- unsigned value;
- uint32_t dword;
- uint8_t byte;
-
- pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400);
-
- byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
-
- dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
- dword |= (1<<29)|(1<<0);
- pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
-
-#if 1
- lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE);
-
- value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77);
- value &= 0xbf;
- lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value);
-#endif
-
-}
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#else
-#include "cpu/amd/model_fxx/node_id.c"
-#endif
-
-static unsigned long main(unsigned long bist)
-{
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the ck804 */
- ck804_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
