Author: hailfinger
Date: 2009-04-03 18:29:35 +0200 (Fri, 03 Apr 2009)
New Revision: 4055
Modified:
trunk/coreboot-v2/src/mainboard/arima/hdama/Config.lb
trunk/coreboot-v2/src/mainboard/arima/hdama/auto.c
trunk/coreboot-v2/src/mainboard/arima/hdama/failover.c
trunk/coreboot-v2/src/mainboard/ibm/e325/Config.lb
trunk/coreboot-v2/src/mainboard/ibm/e325/failover.c
trunk/coreboot-v2/src/mainboard/ibm/e326/Config.lb
trunk/coreboot-v2/src/mainboard/ibm/e326/failover.c
trunk/coreboot-v2/src/mainboard/iwill/dk8s2/Config.lb
trunk/coreboot-v2/src/mainboard/iwill/dk8s2/auto.c
trunk/coreboot-v2/src/mainboard/iwill/dk8s2/failover.c
trunk/coreboot-v2/src/mainboard/iwill/dk8x/Config.lb
trunk/coreboot-v2/src/mainboard/iwill/dk8x/auto.c
trunk/coreboot-v2/src/mainboard/iwill/dk8x/failover.c
trunk/coreboot-v2/src/mainboard/msi/ms9282/Config.lb
trunk/coreboot-v2/src/mainboard/msi/ms9282/failover.c
trunk/coreboot-v2/src/mainboard/newisys/khepri/Config.lb
trunk/coreboot-v2/src/mainboard/newisys/khepri/auto.c
trunk/coreboot-v2/src/mainboard/newisys/khepri/failover.c
trunk/coreboot-v2/src/mainboard/sunw/ultra40/Config.lb
trunk/coreboot-v2/src/mainboard/sunw/ultra40/auto.c
trunk/coreboot-v2/src/mainboard/sunw/ultra40/failover.c
trunk/coreboot-v2/src/mainboard/tyan/s2891/Config.lb
trunk/coreboot-v2/src/mainboard/tyan/s2892/Config.lb
trunk/coreboot-v2/src/mainboard/tyan/s2895/Config.lb
trunk/coreboot-v2/src/mainboard/tyan/s4880/Config.lb
trunk/coreboot-v2/src/mainboard/tyan/s4880/auto.c
trunk/coreboot-v2/src/mainboard/tyan/s4880/failover.c
trunk/coreboot-v2/src/mainboard/tyan/s4882/Config.lb
trunk/coreboot-v2/src/mainboard/tyan/s4882/auto.c
trunk/coreboot-v2/src/mainboard/tyan/s4882/failover.c
Log:
There are more than a dozen targets in the v2 tree which refer to ROMCC
in their Config.lb but never use it. There's no point in keeping
dead code around.
This patch removes ROMCC remainders from Config.lb and kills orphaned
auto.c and failover.c in the affected mainboard directories.
arima/hdama
ibm/e325
ibm/e326
iwill/dk8s2
iwill/dk8x
msi/ms9282
newisys/khepri
sunw/ultra40
tyan/s2891
tyan/s2892
tyan/s2895
tyan/s4880
tyan/s4882
Abuild log is completely identical with and without the patch.
With this patch, the last ROMCC remainders for K8 boards are gone.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Acked-by: Patrick Georgi <patrick.georgi(a)coresystems.de>
Modified: trunk/coreboot-v2/src/mainboard/arima/hdama/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/arima/hdama/Config.lb 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/arima/hdama/Config.lb 2009-04-03 16:29:35 UTC (rev 4055)
@@ -46,8 +46,6 @@
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
@@ -65,31 +63,7 @@
end
end
-else
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
##
@@ -100,7 +74,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -108,7 +81,6 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -121,24 +93,16 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -146,13 +110,8 @@
### failover to another image.
###
if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
-else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
end
-end
###
### O.k. We aren't just an intermediary anymore!
@@ -161,28 +120,13 @@
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
-
##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-end
-
-##
## Include the secondary Configuration files
##
config chip.h
Modified: trunk/coreboot-v2/src/mainboard/arima/hdama/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/arima/hdama/auto.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/arima/hdama/auto.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,179 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "superio/nsc/pc87360/pc87360_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-
-static void hard_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3);
-
- /* enable cf9 */
- pci_write_config8(dev, 0x41, 0xf1);
-
- /* reset */
- set_bios_reset();
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0);
-
- /* Reset */
- set_bios_reset();
- pci_write_config8(dev, 0x47, 1);
-}
-
-/*
- * GPIO28 of 8111 will control H0_MEMRESET_L
- * GPIO29 of 8111 will control H1_MEMRESET_L
- */
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
- }
- else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
- }
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- /* Set memreset_high */
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
- udelay(90);
- }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "sdram/generic_sdram.c"
-#include "cpu/amd/dualcore/dualcore.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-#include "debug.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
- .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
- },
-#endif
- };
-
- int needs_reset;
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
- /* Setup the console */
- pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_default_resource_map();
- needs_reset = setup_coherent_ht_domain();
- needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-#if 0
- print_pci_devices();
-#endif
- enable_smbus();
-#if 0
- dump_spd_registers(ARRAY_SIZE(cpu), cpu);
-#endif
-
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-#if 0
- dump_pci_devices();
-#endif
-#if 0
- dump_pci_device(PCI_DEV(0, 0x18, 2));
- dump_pci_device(PCI_DEV(0, 0x18, 3));
-#endif
-
-#if 0
- /* Check the first 1M */
- ram_check(0x00000000, 0x000100000);
-#endif
-}
Modified: trunk/coreboot-v2/src/mainboard/arima/hdama/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/arima/hdama/failover.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/arima/hdama/failover.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,67 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
- unsigned nodeid;
-
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- nodeid = lapicid() & 0xf;
-
- /* Is this a cpu only reset? */
- if (cpu_init_detected(nodeid)) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Modified: trunk/coreboot-v2/src/mainboard/ibm/e325/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/ibm/e325/Config.lb 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/ibm/e325/Config.lb 2009-04-03 16:29:35 UTC (rev 4055)
@@ -47,8 +47,6 @@
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
@@ -66,31 +64,7 @@
end
end
-else
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
##
@@ -101,7 +75,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -109,7 +82,6 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -122,24 +94,16 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -147,13 +111,8 @@
### failover to another image.
###
if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
-else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
end
-end
###
### O.k. We aren't just an intermediary anymore!
@@ -162,28 +121,13 @@
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
-
##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-end
-
-##
## Include the secondary Configuration files
##
config chip.h
Modified: trunk/coreboot-v2/src/mainboard/ibm/e325/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/ibm/e325/failover.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/ibm/e325/failover.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,67 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
- unsigned nodeid;
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- nodeid = lapicid() & 0xf;
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Modified: trunk/coreboot-v2/src/mainboard/ibm/e326/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/ibm/e326/Config.lb 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/ibm/e326/Config.lb 2009-04-03 16:29:35 UTC (rev 4055)
@@ -47,8 +47,6 @@
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
@@ -66,31 +64,7 @@
end
end
-else
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
##
@@ -101,7 +75,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -109,7 +82,6 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -122,24 +94,16 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -147,13 +111,8 @@
### failover to another image.
###
if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
-else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
end
-end
###
### O.k. We aren't just an intermediary anymore!
@@ -162,28 +121,13 @@
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
-
##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-end
-
-##
## Include the secondary Configuration files
##
config chip.h
Modified: trunk/coreboot-v2/src/mainboard/ibm/e326/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/ibm/e326/failover.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/ibm/e326/failover.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,67 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
- unsigned nodeid;
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- nodeid = lapicid() & 0xf;
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Modified: trunk/coreboot-v2/src/mainboard/iwill/dk8s2/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/iwill/dk8s2/Config.lb 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/iwill/dk8s2/Config.lb 2009-04-03 16:29:35 UTC (rev 4055)
@@ -50,8 +50,6 @@
## ATI Rage XL framebuffering graphics driver
dir /drivers/ati/ragexl
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
@@ -69,31 +67,7 @@
end
end
-else
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
##
@@ -104,7 +78,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -112,7 +85,6 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -125,24 +97,16 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -150,13 +114,8 @@
### failover to another image.
###
if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
-else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
end
-end
###
### O.k. We aren't just an intermediary anymore!
@@ -165,28 +124,13 @@
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
-
##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-end
-
-##
## Include the secondary Configuration files
##
config chip.h
Modified: trunk/coreboot-v2/src/mainboard/iwill/dk8s2/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/iwill/dk8s2/auto.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/iwill/dk8s2/auto.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,159 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-static void hard_reset(void)
-{
- set_bios_reset();
-
- /* enable cf9 */
- pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- set_bios_reset();
- pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
-}
-
-/*
- * GPIO28 of 8111 will control H0_MEMRESET_L
- * GPIO29 of 8111 will control H1_MEMRESET_L
- */
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
- } else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
- }
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- /* Set memreset_high */
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
- udelay(90);
- }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "sdram/generic_sdram.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
- .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
- },
-#endif
- };
-
- int needs_reset;
- unsigned nodeid;
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
- /* Setup the console */
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_default_resource_map();
- needs_reset = setup_coherent_ht_domain();
- needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
-#if 0
- print_pci_devices();
-#endif
-
- enable_smbus();
-
-#if 0
- dump_spd_registers(&cpu[0]);
-#endif
-
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-#if 0
- dump_pci_devices();
- dump_pci_device(PCI_DEV(0, 0x18, 2));
-#endif
-}
Modified: trunk/coreboot-v2/src/mainboard/iwill/dk8s2/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/iwill/dk8s2/failover.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/iwill/dk8s2/failover.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,66 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
- unsigned nodeid;
-
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Modified: trunk/coreboot-v2/src/mainboard/iwill/dk8x/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/iwill/dk8x/Config.lb 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/iwill/dk8x/Config.lb 2009-04-03 16:29:35 UTC (rev 4055)
@@ -47,8 +47,6 @@
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
@@ -66,31 +64,7 @@
end
end
-else
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
##
@@ -101,7 +75,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -109,7 +82,6 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -122,24 +94,16 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -147,13 +111,8 @@
### failover to another image.
###
if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
-else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
end
-end
###
### O.k. We aren't just an intermediary anymore!
@@ -162,28 +121,13 @@
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
-
##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-end
-
-##
## Include the secondary Configuration files
##
config chip.h
Modified: trunk/coreboot-v2/src/mainboard/iwill/dk8x/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/iwill/dk8x/auto.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/iwill/dk8x/auto.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,189 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-
-#include "superio/nsc/pc87360/pc87360_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
-
-static void hard_reset(void)
-{
- set_bios_reset();
-
- /* enable cf9 */
- pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- set_bios_reset();
- pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
-}
-
-/*
- * GPIO28 of 8111 will control H0_MEMRESET_L
- * GPIO29 of 8111 will control H1_MEMRESET_L
- */
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
- }
- else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
- }
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- /* Set memreset_high */
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
- udelay(90);
- }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "sdram/generic_sdram.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
- .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
- },
-#endif
- };
-
- int needs_reset;
- unsigned nodeid;
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
- /* Setup the console */
- pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_default_resource_map();
- needs_reset = setup_coherent_ht_domain();
- needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
-#if 0
- print_pci_devices();
-#endif
- enable_smbus();
-#if 0
- dump_spd_registers(&cpu[0]);
-#endif
-
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-#if 1
- dump_pci_devices();
-#endif
-#if 0
- dump_pci_device(PCI_DEV(0, 0x18, 2));
-#endif
-
- /* Check all of memory */
-#if 0
- msr_t msr;
- msr = rdmsr(TOP_MEM);
- print_debug("TOP_MEM: ");
- print_debug_hex32(msr.hi);
- print_debug_hex32(msr.lo);
- print_debug("\r\n");
-#endif
-#if 0
- ram_check(0x00000000, msr.lo);
-#endif
-#if 0
- static const struct {
- unsigned long lo, hi;
- } check_addrs[] = {
- /* Check 16MB of memory @ 0*/
- { 0x00000000, 0x01000000 },
-#if TOTAL_CPUS > 1
- /* Check 16MB of memory @ 2GB */
- { 0x80000000, 0x81000000 },
-#endif
- };
- int i;
- for(i = 0; i < ARRAY_SIZE(check_addrs); i++) {
- ram_check(check_addrs[i].lo, check_addrs[i].hi);
- }
-#endif
-}
Modified: trunk/coreboot-v2/src/mainboard/iwill/dk8x/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/iwill/dk8x/failover.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/iwill/dk8x/failover.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,66 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
- unsigned nodeid;
-
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Modified: trunk/coreboot-v2/src/mainboard/msi/ms9282/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/msi/ms9282/Config.lb 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/msi/ms9282/Config.lb 2009-04-03 16:29:35 UTC (rev 4055)
@@ -75,8 +75,6 @@
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
@@ -94,34 +92,8 @@
end
end
-else
##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-
-end
-
-##
## Build our 16 bit and 32 bit coreboot entry code
##
if USE_FALLBACK_IMAGE
@@ -131,7 +103,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -139,7 +110,6 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -152,12 +122,6 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
@@ -172,12 +136,10 @@
ldscript /southbridge/nvidia/mcp55/romstrap.lds
end
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -185,13 +147,8 @@
### failover to another image.
###
if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
-else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
end
-end
###
### O.k. We aren't just an intermediary anymore!
@@ -200,25 +157,12 @@
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
-# ROMCC
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
##
## Include the secondary Configuration files
##
Modified: trunk/coreboot-v2/src/mainboard/msi/ms9282/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/msi/ms9282/failover.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/msi/ms9282/failover.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,114 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2006 AMD
- * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD.
- *
- * Copyright (C) 2006 MSI
- * Written by Bingxun Shi <bingxunshi(a)gmail.com> for MSI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-
-#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static void sio_setup(void)
-{
-
- unsigned value;
- uint32_t dword;
- uint8_t byte;
-
- byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
-
- dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
- dword |= (1<<0);
- pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
-
-
-}
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif
-
-static unsigned long main(unsigned long bist)
-{
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the mcp55 */
- mcp55_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Modified: trunk/coreboot-v2/src/mainboard/newisys/khepri/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/newisys/khepri/Config.lb 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/newisys/khepri/Config.lb 2009-04-03 16:29:35 UTC (rev 4055)
@@ -47,8 +47,6 @@
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
@@ -66,32 +64,7 @@
end
end
-else
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
##
@@ -102,7 +75,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -110,7 +82,6 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -123,23 +94,16 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-### Should this be in the northbridge code?
-if USE_DCACHE_RAM
-else
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -147,13 +111,8 @@
### failover to another image.
###
if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
-else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
end
-end
###
### O.k. We aren't just an intermediary anymore!
@@ -162,29 +121,12 @@
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
-
-##
-## Setup RAM
-##
-
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
config chip.h
# FIXME: ROM for onboard VGA
Modified: trunk/coreboot-v2/src/mainboard/newisys/khepri/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/newisys/khepri/auto.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/newisys/khepri/auto.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,155 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-static void hard_reset(void)
-{
- set_bios_reset();
-
- /* enable cf9 */
- pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- set_bios_reset();
- pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
- }
- else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
- }
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- /* Set memreset_high */
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
- udelay(90);
- }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-
-#include "sdram/generic_sdram.c"
-
-/* newisys khepri does not want the default */
-#include "resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define NODE_RAM(x) \
- .node_id = 0+x, \
- .f0 = PCI_DEV(0, 0x18+x, 0), \
- .f1 = PCI_DEV(0, 0x18+x, 1), \
- .f2 = PCI_DEV(0, 0x18+x, 2), \
- .f3 = PCI_DEV(0, 0x18+x, 3)
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
- {
- NODE_RAM(0),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
- {
- NODE_RAM(1),
- .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
- .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
- },
- };
-
- int needs_reset;
- unsigned nodeid;
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
- /* Setup the console */
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_khepri_resource_map();
- needs_reset = setup_coherent_ht_domain();
- needs_reset=ht_setup_chains_x();
-
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-#if 0
- print_pci_devices();
-#endif
- enable_smbus();
-#if 0
- dump_spd_registers(&cpu[0]);
-#endif
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-#if 0
- dump_pci_devices();
-#endif
-#if 0
- dump_pci_device(PCI_DEV(0, 0x18, 2));
-#endif
-
-#if 0
- /* Check the first 1M */
- ram_check(0x00000000, 0x000100000);
-#endif
-}
Modified: trunk/coreboot-v2/src/mainboard/newisys/khepri/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/newisys/khepri/failover.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/newisys/khepri/failover.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,66 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
- unsigned nodeid;
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- nodeid=lapicid();
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Modified: trunk/coreboot-v2/src/mainboard/sunw/ultra40/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/sunw/ultra40/Config.lb 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/sunw/ultra40/Config.lb 2009-04-03 16:29:35 UTC (rev 4055)
@@ -47,8 +47,6 @@
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -63,32 +61,6 @@
end
end
-else
- ##
- ## Romcc output
- ##
- makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
-
- makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
-
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
##
@@ -99,7 +71,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -107,9 +78,7 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
-
##
## Build our reset vector (This is where coreboot is entered)
##
@@ -121,12 +90,6 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
- ### Should this be in the northbridge code?
- mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
@@ -141,14 +104,10 @@
ldscript /southbridge/nvidia/ck804/romstrap.lds
end
-
-
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -157,34 +116,17 @@
###
if USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
- if USE_DCACHE_RAM
- else
- mainboardinit ./failover.inc
- end
end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
- # ROMCC
- mainboardinit cpu/x86/fpu/enable_fpu.inc
- mainboardinit cpu/x86/mmx/enable_mmx.inc
- mainboardinit cpu/x86/sse/enable_sse.inc
- mainboardinit ./auto.inc
- mainboardinit cpu/x86/sse/disable_sse.inc
- mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
##
## Include the secondary Configuration files
##
Modified: trunk/coreboot-v2/src/mainboard/sunw/ultra40/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/sunw/ultra40/auto.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/sunw/ultra40/auto.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,198 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-
-#include <cpu/amd/model_fxx_rev.h>
-//#define K8_HT_FREQ_1G_SUPPORT 1
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/nvidia/ck804/ck804_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_msr.h>
-#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1)
-
-static void hard_reset(void)
-{
- set_bios_reset();
-
- /* full reset */
- outb(0x0a, 0x0cf9);
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- set_bios_reset();
-#if 1
- /* link reset */
- outb(0x02, 0x0cf9);
- outb(0x06, 0x0cf9);
-#endif
-}
-
-static void memreset_setup(void)
-{
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
-
-#define SUPERIO_GPIO_IO_BASE 0x400
-
-static void sio_gpio_setup(void){
-
- unsigned value;
-
-// lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); // Already enable in failover.c
-
-#if 1
- lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L
- value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c);
- lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1)));
-#endif
-
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#define QRANK_DIMM_SUPPORT 1
-
-#include "northbridge/amd/amdk8/raminit.c"
-#if 0
- #define ENABLE_APIC_EXT_ID 1
- #define APIC_ID_OFFSET 0x10
- #define LIFT_BSP_APIC_ID 0
-#else
- #define ENABLE_APIC_EXT_ID 0
-#endif
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
-/* maybe does not want the default */
-#include "resourcemap.c"
-
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-#define CK804_NUM 2
-#define CK804B_BUSN 0x80
-#define CK804_USE_NIC 1
-#define CK804_USE_ACI 1
-#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
-
-//set GPIO to input mode
-#define CK804_MB_SETUP \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/
-
-#include "southbridge/nvidia/ck804/ck804_early_setup.c"
-
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
- .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
- },
-#endif
- };
-
- int needs_reset;
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
-
- // post_code(0x32);
-
- lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- sio_gpio_setup();
-
- setup_ultra40_resource_map();
-
- needs_reset = setup_coherent_ht_domain();
-
- needs_reset |= ht_setup_chains_x();
-
- needs_reset |= ck804_early_setup_x();
-
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
-
- enable_smbus();
-
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-
-}
Modified: trunk/coreboot-v2/src/mainboard/sunw/ultra40/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/sunw/ultra40/failover.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/sunw/ultra40/failover.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,118 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-
-#include <device/pnp_def.h>
-
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-
-#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
-#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
-
-#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
-
-#define SUPERIO_GPIO_IO_BASE 0x400
-
-#define SUPERIO_COM1_DEV PNP_DEV(0x2e, LPC47B397_SP1)
-
-#define SUPERIO_COM1_IO_BASE 0x3f8
-
-static void sio_setup(void)
-{
-
- unsigned value;
- uint32_t dword;
- uint8_t byte;
-
- pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400);
-
- byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
-
- dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
- dword |= (1<<29)|(1<<0);
- pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
-
-#if 1
- lpc47b397_enable_serial(SUPERIO_COM1_DEV, SUPERIO_COM1_IO_BASE);
-
-#if 0
-/* what's this?
- value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77);
- value &= 0xbf;
- lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value);
-*/
-#endif
-#endif
-
-}
-
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#else
-#include "cpu/amd/model_fxx/node_id.c"
-#endif
-
-
-static unsigned long main(unsigned long bist)
-{
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the ck804 */
- ck804_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Modified: trunk/coreboot-v2/src/mainboard/tyan/s2891/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2891/Config.lb 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2891/Config.lb 2009-04-03 16:29:35 UTC (rev 4055)
@@ -63,8 +63,6 @@
#./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
end
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -79,32 +77,6 @@
end
end
-else
- ##
- ## Romcc output
- ##
- makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
-
- makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
-
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
##
@@ -115,7 +87,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -123,7 +94,6 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -136,12 +106,6 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
- ### Should this be in the northbridge code?
- mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
@@ -156,12 +120,10 @@
ldscript /southbridge/nvidia/ck804/romstrap.lds
end
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -170,10 +132,6 @@
###
if USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
- if USE_DCACHE_RAM
- else
- mainboardinit ./failover.inc
- end
end
###
@@ -183,25 +141,12 @@
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
- # ROMCC
- mainboardinit cpu/x86/fpu/enable_fpu.inc
- mainboardinit cpu/x86/mmx/enable_mmx.inc
- mainboardinit cpu/x86/sse/enable_sse.inc
- mainboardinit ./auto.inc
- mainboardinit cpu/x86/sse/disable_sse.inc
- mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
##
## Include the secondary Configuration files
##
Modified: trunk/coreboot-v2/src/mainboard/tyan/s2892/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2892/Config.lb 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2892/Config.lb 2009-04-03 16:29:35 UTC (rev 4055)
@@ -63,8 +63,6 @@
#./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
end
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -79,32 +77,6 @@
end
end
-else
- ##
- ## Romcc output
- ##
- makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
-
- makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
-
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
##
@@ -115,7 +87,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -123,7 +94,6 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -136,12 +106,6 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
- ### Should this be in the northbridge code?
- mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
@@ -156,12 +120,10 @@
ldscript /southbridge/nvidia/ck804/romstrap.lds
end
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -169,12 +131,7 @@
### failover to another image.
###
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
- end
end
###
@@ -184,25 +141,12 @@
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
- # ROMCC
- mainboardinit cpu/x86/fpu/enable_fpu.inc
- mainboardinit cpu/x86/mmx/enable_mmx.inc
- mainboardinit cpu/x86/sse/enable_sse.inc
- mainboardinit ./auto.inc
- mainboardinit cpu/x86/sse/disable_sse.inc
- mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
##
## Include the secondary Configuration files
##
Modified: trunk/coreboot-v2/src/mainboard/tyan/s2895/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s2895/Config.lb 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/tyan/s2895/Config.lb 2009-04-03 16:29:35 UTC (rev 4055)
@@ -72,8 +72,6 @@
#./fadt.o is moved to southbridge/nvidia/ck804/Config.lb
end
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
@@ -88,32 +86,6 @@
end
end
-else
- ##
- ## Romcc output
- ##
- makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
-
- makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
-
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
##
@@ -131,7 +103,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -139,7 +110,6 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -162,12 +132,6 @@
end
end
-if USE_DCACHE_RAM
-else
- ### Should this be in the northbridge code?
- mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
@@ -189,12 +153,10 @@
end
end
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -203,42 +165,23 @@
###
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover_failover.lds
- end
end
else
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- else
- mainboardinit ./failover.inc
- end
end
end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
- # ROMCC
- mainboardinit cpu/x86/fpu/enable_fpu.inc
- mainboardinit cpu/x86/mmx/enable_mmx.inc
- mainboardinit cpu/x86/sse/enable_sse.inc
- mainboardinit ./auto.inc
- mainboardinit cpu/x86/sse/disable_sse.inc
- mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
##
## Include the secondary Configuration files
##
Modified: trunk/coreboot-v2/src/mainboard/tyan/s4880/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s4880/Config.lb 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/tyan/s4880/Config.lb 2009-04-03 16:29:35 UTC (rev 4055)
@@ -43,7 +43,6 @@
driver mainboard.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
@@ -61,44 +60,7 @@
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
-else
- ##
- ## Romcc output
- ##
- makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
-
- makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
-
- ##
- ## Setup RAM
- ##
- mainboardinit cpu/x86/fpu/enable_fpu.inc
- mainboardinit cpu/x86/mmx/enable_mmx.inc
- mainboardinit cpu/x86/sse/enable_sse.inc
- mainboardinit ./auto.inc
- mainboardinit cpu/x86/sse/disable_sse.inc
- mainboardinit cpu/x86/mmx/disable_mmx.inc
- mainboardinit arch/i386/lib/jmp_auto_out.inc
-
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
##
@@ -109,7 +71,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -117,9 +78,7 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
-
##
## Build our reset vector (This is where coreboot is entered)
##
@@ -131,25 +90,16 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
- ### Should this be in the northbridge code?
- mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -157,32 +107,18 @@
### failover to another image.
###
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
- end
end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
-
- # ROMCC
- mainboardinit arch/i386/lib/jmp_auto.inc
-
-end
-
##
## Include the secondary Configuration files
##
Modified: trunk/coreboot-v2/src/mainboard/tyan/s4880/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s4880/auto.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/tyan/s4880/auto.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,233 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
- unsigned reg;
-
- for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
- unsigned config_map;
- config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
- if ((config_map & 3) != 3) {
- continue;
- }
- if ((((config_map >> 4) & 7) == node) &&
- (((config_map >> 8) & 3) == link))
- {
- return (config_map >> 16) & 0xff;
- }
- }
- return 0;
-}
-
-static void hard_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 3);
-
- set_bios_reset();
-
- /* enable cf9 */
- pci_write_config8(dev, 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 0);
-
- set_bios_reset();
- pci_write_config8(dev, 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
- udelay(90);
- }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-#define SMBUS_HUB 0x18
- unsigned device=(ctrl->channel0[0])>>8;
- smbus_write_byte(SMBUS_HUB , 0x01, device);
- smbus_write_byte(SMBUS_HUB , 0x03, 0);
-}
-#if 0
-static inline void change_i2c_mux(unsigned device)
-{
-#define SMBUS_HUB 0x18
- smbus_write_byte(SMBUS_HUB , 0x01, device);
- smbus_write_byte(SMBUS_HUB , 0x03, 0);
-}
-#endif
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include "northbridge/amd/amdk8/raminit.c"
-
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
- /* tyan does not want the default */
-#include "resourcemap.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-
-#define THIRD_CPU 1
-#define FOURTH_CPU 1
-
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU + THIRD_CPU + FOURTH_CPU)
-
-#define RC0 ((1<<1)<<8)
-#define RC1 ((1<<2)<<8)
-#define RC2 ((1<<3)<<8)
-#define RC3 ((1<<4)<<8)
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-#define DIMM2 0x52
-#define DIMM3 0x53
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 },
- .channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { RC1|DIMM0, 0 , 0, 0 },
- .channel1 = { RC1|DIMM1, 0, 0, 0 },
-
- },
-#endif
-
-#if THIRD_CPU
- {
- .node_id = 2,
- .f0 = PCI_DEV(0, 0x1a, 0),
- .f1 = PCI_DEV(0, 0x1a, 1),
- .f2 = PCI_DEV(0, 0x1a, 2),
- .f3 = PCI_DEV(0, 0x1a, 3),
- .channel0 = { RC2|DIMM0, 0, 0, 0 },
- .channel1 = { RC2|DIMM1, 0, 0, 0 },
-
- },
-#endif
-#if FOURTH_CPU
- {
- .node_id = 3,
- .f0 = PCI_DEV(0, 0x1b, 0),
- .f1 = PCI_DEV(0, 0x1b, 1),
- .f2 = PCI_DEV(0, 0x1b, 2),
- .f3 = PCI_DEV(0, 0x1b, 3),
- .channel0 = { RC3|DIMM0, 0, 0, 0 },
- .channel1 = { RC3|DIMM1, 0, 0, 0 },
-
- },
-#endif
- };
- int i;
- int needs_reset;
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
-
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_s4880_resource_map();
-
- needs_reset = setup_coherent_ht_domain();
-
- needs_reset |= ht_setup_chains_x();
-
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
-#if 0
- dump_pci_devices();
-#endif
- enable_smbus();
-
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
Modified: trunk/coreboot-v2/src/mainboard/tyan/s4880/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s4880/failover.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/tyan/s4880/failover.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,69 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#endif
-
-
-static unsigned long main(unsigned long bist)
-{
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
Modified: trunk/coreboot-v2/src/mainboard/tyan/s4882/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s4882/Config.lb 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/tyan/s4882/Config.lb 2009-04-03 16:29:35 UTC (rev 4055)
@@ -43,7 +43,6 @@
driver mainboard.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
@@ -61,44 +60,7 @@
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
-else
- ##
- ## Romcc output
- ##
- makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
-
- makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
-
- ##
- ## Setup RAM
- ##
- mainboardinit cpu/x86/fpu/enable_fpu.inc
- mainboardinit cpu/x86/mmx/enable_mmx.inc
- mainboardinit cpu/x86/sse/enable_sse.inc
- mainboardinit ./auto.inc
- mainboardinit cpu/x86/sse/disable_sse.inc
- mainboardinit cpu/x86/mmx/disable_mmx.inc
- mainboardinit arch/i386/lib/jmp_auto_out.inc
-
-end
-
##
## Build our 16 bit and 32 bit coreboot entry code
##
@@ -109,7 +71,6 @@
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -117,9 +78,7 @@
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
-
##
## Build our reset vector (This is where coreboot is entered)
##
@@ -131,25 +90,16 @@
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
- ### Should this be in the northbridge code?
- mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -157,32 +107,18 @@
### failover to another image.
###
if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
- else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
- end
end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
-
- # ROMCC
- mainboardinit arch/i386/lib/jmp_auto.inc
-
-end
-
##
## Include the secondary Configuration files
##
Modified: trunk/coreboot-v2/src/mainboard/tyan/s4882/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s4882/auto.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/tyan/s4882/auto.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,233 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
- unsigned reg;
-
- for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
- unsigned config_map;
- config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
- if ((config_map & 3) != 3) {
- continue;
- }
- if ((((config_map >> 4) & 7) == node) &&
- (((config_map >> 8) & 3) == link))
- {
- return (config_map >> 16) & 0xff;
- }
- }
- return 0;
-}
-
-static void hard_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 1), 0x04, 3);
-
- set_bios_reset();
-
- /* enable cf9 */
- pci_write_config8(dev, 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 1), 0x04, 0);
-
- set_bios_reset();
- pci_write_config8(dev, 0x47, 1);
-}
-
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
- udelay(90);
- }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-#define SMBUS_HUB 0x18
- int ret,i;
- unsigned device=(ctrl->channel0[0])>>8;
- /* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/
- i=2;
- do {
- ret = smbus_write_byte(SMBUS_HUB, 0x01, device);
- } while ((ret!=0) && (i-->0));
-
- smbus_write_byte(SMBUS_HUB, 0x03, 0);
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#define QRANK_DIMM_SUPPORT 1
-#include "northbridge/amd/amdk8/raminit.c"
-#if 0
- #define ENABLE_APIC_EXT_ID 1
- #define APIC_ID_OFFSET 0x10
- #define LIFT_BSP_APIC_ID 0
-#else
- #define ENABLE_APIC_EXT_ID 0
-#endif
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "sdram/generic_sdram.c"
-
- /* tyan does not want the default */
-#include "resourcemap.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-
-#define THIRD_CPU 1
-#define FOURTH_CPU 1
-
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU + THIRD_CPU + FOURTH_CPU)
-
-#define RC0 ((1<<2)<<8)
-#define RC1 ((1<<1)<<8)
-#define RC2 ((1<<4)<<8)
-#define RC3 ((1<<3)<<8)
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-#define DIMM2 0x52
-#define DIMM3 0x53
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 },
- .channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { RC1|DIMM0, RC1|DIMM2 , 0, 0 },
- .channel1 = { RC1|DIMM1, RC1|DIMM3 , 0, 0 },
-
- },
-#endif
-
-#if THIRD_CPU
- {
- .node_id = 2,
- .f0 = PCI_DEV(0, 0x1a, 0),
- .f1 = PCI_DEV(0, 0x1a, 1),
- .f2 = PCI_DEV(0, 0x1a, 2),
- .f3 = PCI_DEV(0, 0x1a, 3),
- .channel0 = { RC2|DIMM0, RC2|DIMM2, 0, 0 },
- .channel1 = { RC2|DIMM1, RC2|DIMM3, 0, 0 },
-
- },
-#endif
-#if FOURTH_CPU
- {
- .node_id = 3,
- .f0 = PCI_DEV(0, 0x1b, 0),
- .f1 = PCI_DEV(0, 0x1b, 1),
- .f2 = PCI_DEV(0, 0x1b, 2),
- .f3 = PCI_DEV(0, 0x1b, 3),
- .channel0 = { RC3|DIMM0, RC3|DIMM2, 0, 0 },
- .channel1 = { RC3|DIMM1, RC3|DIMM3, 0, 0 },
-
- },
-#endif
- };
- int i;
- int needs_reset;
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
-
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_s4882_resource_map();
-
- needs_reset = setup_coherent_ht_domain();
-
- needs_reset |= ht_setup_chains_x();
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
- enable_smbus();
-
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-}
Modified: trunk/coreboot-v2/src/mainboard/tyan/s4882/failover.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/tyan/s4882/failover.c 2009-04-03 16:17:05 UTC (rev 4054)
+++ trunk/coreboot-v2/src/mainboard/tyan/s4882/failover.c 2009-04-03 16:29:35 UTC (rev 4055)
@@ -1,68 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#include "cpu/amd/dualcore/dualcore_id.c"
-#else
-#include "cpu/amd/model_fxx/node_id.c"
-#endif
-
-
-static unsigned long main(unsigned long bist)
-{
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
