coreboot October 2009

coreboot@coreboot.org

63 participants
534 discussions

build service results for r4885
by coreboot information 28 Oct '09

28 Oct '09

Dear coreboot readers! This is the automatic build system of coreboot. The developer "stepan" checked in revision 4885 to the coreboot repository. This caused the following changes: Change Log: Drop remainders of PPC port Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Ronald G. Minnich <rminnich(a)gmail.com> Build Log: Compilation of intel:d945gclf is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4885&device=d945gclf&vendo… If something broke during this checkin please be a pain in stepan's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

build service results for r4884
by coreboot information 28 Oct '09

28 Oct '09

Dear coreboot readers! This is the automatic build system of coreboot. The developer "stepan" checked in revision 4884 to the coreboot repository. This caused the following changes: Change Log: Drop remainder of PPC port Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Ronald G. Minnich <rminnich(a)gmail.com> Build Log: Compilation of intel:d945gclf is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4884&device=d945gclf&vendo… If something broke during this checkin please be a pain in stepan's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

[v2] r4887 - trunk/coreboot-v2/targets/intel/d945gclf
by svn＠coreboot.org 28 Oct '09

28 Oct '09

Author: myles Date: 2009-10-28 20:56:34 +0100 (Wed, 28 Oct 2009) New Revision: 4887 Modified: trunk/coreboot-v2/targets/intel/d945gclf/Config-abuild.lb Log: Comment out option ROM line in Config-abuild.lb to fix build. Signed-off-by: Myles Watson <mylesgw(a)gmail.com> Acked-by: Myles Watson <mylesgw(a)gmail.com> Modified: trunk/coreboot-v2/targets/intel/d945gclf/Config-abuild.lb =================================================================== --- trunk/coreboot-v2/targets/intel/d945gclf/Config-abuild.lb 2009-10-28 19:41:52 UTC (rev 4886) +++ trunk/coreboot-v2/targets/intel/d945gclf/Config-abuild.lb 2009-10-28 19:56:34 UTC (rev 4887) @@ -42,5 +42,5 @@ end buildrom ./coreboot.rom CONFIG_ROM_SIZE "normal" "fallback" -pci_rom ../../../misc/d945gclf-pci8086,2772.rom vendor_id=0x8086 device_id=0x2772 +#pci_rom ../../../misc/d945gclf-pci8086,2772.rom vendor_id=0x8086 device_id=0x2772

1 0

build service results for r4883
by coreboot information 28 Oct '09

28 Oct '09

Dear coreboot readers! This is the automatic build system of coreboot. The developer "myles" checked in revision 4883 to the coreboot repository. This caused the following changes: Change Log: Fix some builds with Kconfig. Signed-off-by: Myles Watson <mylesgw(a)gmail.com> Acked-by: Myles Watson <mylesgw(a)gmail.com> Build Log: Compilation of intel:d945gclf is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4883&device=d945gclf&vendo… If something broke during this checkin please be a pain in myles's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

[v2] r4886 - in trunk/coreboot-v2/util: . amdtools amdtools/example_input
by svn＠coreboot.org 28 Oct '09

28 Oct '09

Author: ward Date: 2009-10-28 20:41:52 +0100 (Wed, 28 Oct 2009) New Revision: 4886 Added: trunk/coreboot-v2/util/amdtools/ trunk/coreboot-v2/util/amdtools/README trunk/coreboot-v2/util/amdtools/example_input/ trunk/coreboot-v2/util/amdtools/example_input/coreboot-48G-667MHz-memsettings trunk/coreboot-v2/util/amdtools/example_input/coreboot-48G-667MHz-memsettings-20090909h trunk/coreboot-v2/util/amdtools/example_input/lspci-cb-48G-667MHz-18.2-20090909e trunk/coreboot-v2/util/amdtools/example_input/lspci-prop-48G-667MHz-18.2 trunk/coreboot-v2/util/amdtools/k8-compare-pci-space.pl trunk/coreboot-v2/util/amdtools/k8-interpret-extended-memory-settings.pl trunk/coreboot-v2/util/amdtools/k8-read-mem-settings.sh trunk/coreboot-v2/util/amdtools/parse-bkdg.pl Log: Add an initial version of some tools to compare (extended) K8 memory settings. This generates (dirty) html with interpreted differences between PCI dumps, based on the K8 socket F bkdg. Signed-off-by: Ward Vandewege <ward(a)gnu.org> Acked-by: Stepan Reinauer <stepan(a)coresystems.de> Added: trunk/coreboot-v2/util/amdtools/README =================================================================== --- trunk/coreboot-v2/util/amdtools/README (rev 0) +++ trunk/coreboot-v2/util/amdtools/README 2009-10-28 19:41:52 UTC (rev 4886) @@ -0,0 +1,32 @@ + + +This is a set of tools to compare (extended) K8 memory settings. + +Before you can use them, you need to massage the relevant BKDG sections into +useable data. Here's how. + +First, you need to acquire a copy of the K8 BKDG. Go here: + + Rev F: http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/325… + +Then make sure pdftotext is installed (it's in the poppler-utils package on Debian/Ubuntu). + +Now run the bkdg through pdftotext: + + pdftotext -layout 32559.pdf 32559.txt + +Now extract sections 4.5.15 - 4.5.19 from the file, and save it separately, say as bkdg-raw.data. + +Finally run the txt file through the parse-bkdg.pl script like so: + + parse-bkdg.pl < bkdg-raw.data > bkdg.data + +Now we have the bkdg.data file that is used by the other scripts. + +If you want to test the scripts without doing all this work, you can use some +sample input files from the 'example_input/' directory. + +-- +Ward Vandewege, 2009-10-28. +ward(a)jhvc.com + Added: trunk/coreboot-v2/util/amdtools/example_input/coreboot-48G-667MHz-memsettings =================================================================== --- trunk/coreboot-v2/util/amdtools/example_input/coreboot-48G-667MHz-memsettings (rev 0) +++ trunk/coreboot-v2/util/amdtools/example_input/coreboot-48G-667MHz-memsettings 2009-10-28 19:41:52 UTC (rev 4886) @@ -0,0 +1,96 @@ +0:18.2 98.l: 80000000 +0:18.2 9C.l: 00111222 +0:18.2 98.l: 80000001 +0:18.2 9C.l: 16171715 +0:18.2 98.l: 80000002 +0:18.2 9C.l: 1716131a +0:18.2 98.l: 80000003 +0:18.2 9C.l: 00000019 +0:18.2 98.l: 80000004 +0:18.2 9C.l: 002f0000 +0:18.2 98.l: 80000005 +0:18.2 9C.l: 18191918 +0:18.2 98.l: 80000006 +0:18.2 9C.l: 16161917 +0:18.2 98.l: 80000007 +0:18.2 9C.l: 00000017 +0:18.2 98.l: 80000020 +0:18.2 9C.l: 00111222 +0:18.2 98.l: 80000021 +0:18.2 9C.l: 00000000 +0:18.2 98.l: 80000022 +0:18.2 9C.l: 00000000 +0:18.2 98.l: 80000023 +0:18.2 9C.l: 00000000 +0:18.2 98.l: 80000024 +0:18.2 9C.l: 00000000 +0:18.2 98.l: 80000025 +0:18.2 9C.l: 2f2f2f2f +0:18.2 98.l: 80000026 +0:18.2 9C.l: 2f2f2f2f +0:18.2 98.l: 80000027 +0:18.2 9C.l: 00000000 +0:18.2 98.l: 80000010 +0:18.2 9C.l: 00000000 +0:18.2 98.l: 80000013 +0:18.2 9C.l: 00000000 +0:18.2 98.l: 80000016 +0:18.2 9C.l: 0000003f +0:18.2 98.l: 80000019 +0:18.2 9C.l: 00000046 +0:18.2 98.l: 80000030 +0:18.2 9C.l: 00000000 +0:18.2 98.l: 80000033 +0:18.2 9C.l: 00000000 +0:18.2 98.l: 80000036 +0:18.2 9C.l: 00000053 +0:18.2 98.l: 80000039 +0:18.2 9C.l: 00000053 +0:19.2 98.l: 80000000 +0:19.2 9C.l: 00111222 +0:19.2 98.l: 80000001 +0:19.2 9C.l: 15151515 +0:19.2 98.l: 80000002 +0:19.2 9C.l: 15151515 +0:19.2 98.l: 80000003 +0:19.2 9C.l: 00000015 +0:19.2 98.l: 80000004 +0:19.2 9C.l: 002f0000 +0:19.2 98.l: 80000005 +0:19.2 9C.l: 19181918 +0:19.2 98.l: 80000006 +0:19.2 9C.l: 191a1817 +0:19.2 98.l: 80000007 +0:19.2 9C.l: 00000017 +0:19.2 98.l: 80000020 +0:19.2 9C.l: 00111222 +0:19.2 98.l: 80000021 +0:19.2 9C.l: 00000000 +0:19.2 98.l: 80000022 +0:19.2 9C.l: 00000000 +0:19.2 98.l: 80000023 +0:19.2 9C.l: 00000000 +0:19.2 98.l: 80000024 +0:19.2 9C.l: 00000000 +0:19.2 98.l: 80000025 +0:19.2 9C.l: 2f2f2f2f +0:19.2 98.l: 80000026 +0:19.2 9C.l: 2f2f2f2f +0:19.2 98.l: 80000027 +0:19.2 9C.l: 00000000 +0:19.2 98.l: 80000010 +0:19.2 9C.l: 00000000 +0:19.2 98.l: 80000013 +0:19.2 9C.l: 00000000 +0:19.2 98.l: 80000016 +0:19.2 9C.l: 0000003b +0:19.2 98.l: 80000019 +0:19.2 9C.l: 00000047 +0:19.2 98.l: 80000030 +0:19.2 9C.l: 00000000 +0:19.2 98.l: 80000033 +0:19.2 9C.l: 00000000 +0:19.2 98.l: 80000036 +0:19.2 9C.l: 00000053 +0:19.2 98.l: 80000039 +0:19.2 9C.l: 00000053 Added: trunk/coreboot-v2/util/amdtools/example_input/coreboot-48G-667MHz-memsettings-20090909h =================================================================== --- trunk/coreboot-v2/util/amdtools/example_input/coreboot-48G-667MHz-memsettings-20090909h (rev 0) +++ trunk/coreboot-v2/util/amdtools/example_input/coreboot-48G-667MHz-memsettings-20090909h 2009-10-28 19:41:52 UTC (rev 4886) @@ -0,0 +1,96 @@ +0:18.2 98.l: 80000000 +0:18.2 9C.l: 10111222 +0:18.2 98.l: 80000001 +0:18.2 9C.l: 17171716 +0:18.2 98.l: 80000002 +0:18.2 9C.l: 17161619 +0:18.2 98.l: 80000003 +0:18.2 9C.l: 00000018 +0:18.2 98.l: 80000004 +0:18.2 9C.l: 002f2f00 +0:18.2 98.l: 80000005 +0:18.2 9C.l: 17171716 +0:18.2 98.l: 80000006 +0:18.2 9C.l: 16171717 +0:18.2 98.l: 80000007 +0:18.2 9C.l: 00000017 +0:18.2 98.l: 80000020 +0:18.2 9C.l: 10111222 +0:18.2 98.l: 80000021 +0:18.2 9C.l: 15151515 +0:18.2 98.l: 80000022 +0:18.2 9C.l: 14161514 +0:18.2 98.l: 80000023 +0:18.2 9C.l: 00000014 +0:18.2 98.l: 80000024 +0:18.2 9C.l: 002f2f00 +0:18.2 98.l: 80000025 +0:18.2 9C.l: 1817171a +0:18.2 98.l: 80000026 +0:18.2 9C.l: 1a191719 +0:18.2 98.l: 80000027 +0:18.2 9C.l: 00000018 +0:18.2 98.l: 80000010 +0:18.2 9C.l: 00000000 +0:18.2 98.l: 80000013 +0:18.2 9C.l: 00000033 +0:18.2 98.l: 80000016 +0:18.2 9C.l: 00000065 +0:18.2 98.l: 80000019 +0:18.2 9C.l: 00000026 +0:18.2 98.l: 80000030 +0:18.2 9C.l: 00000000 +0:18.2 98.l: 80000033 +0:18.2 9C.l: 00000033 +0:18.2 98.l: 80000036 +0:18.2 9C.l: 00000065 +0:18.2 98.l: 80000039 +0:18.2 9C.l: 00000024 +0:19.2 98.l: 80000000 +0:19.2 9C.l: 10111222 +0:19.2 98.l: 80000001 +0:19.2 9C.l: 17171717 +0:19.2 98.l: 80000002 +0:19.2 9C.l: 17161617 +0:19.2 98.l: 80000003 +0:19.2 9C.l: 00000016 +0:19.2 98.l: 80000004 +0:19.2 9C.l: 002f2f00 +0:19.2 98.l: 80000005 +0:19.2 9C.l: 17171717 +0:19.2 98.l: 80000006 +0:19.2 9C.l: 17171617 +0:19.2 98.l: 80000007 +0:19.2 9C.l: 00000016 +0:19.2 98.l: 80000020 +0:19.2 9C.l: 10111222 +0:19.2 98.l: 80000021 +0:19.2 9C.l: 15151514 +0:19.2 98.l: 80000022 +0:19.2 9C.l: 14141514 +0:19.2 98.l: 80000023 +0:19.2 9C.l: 00000014 +0:19.2 98.l: 80000024 +0:19.2 9C.l: 002f2f00 +0:19.2 98.l: 80000025 +0:19.2 9C.l: 1717191a +0:19.2 98.l: 80000026 +0:19.2 9C.l: 1a1a1919 +0:19.2 98.l: 80000027 +0:19.2 9C.l: 00000019 +0:19.2 98.l: 80000010 +0:19.2 9C.l: 00000000 +0:19.2 98.l: 80000013 +0:19.2 9C.l: 00000031 +0:19.2 98.l: 80000016 +0:19.2 9C.l: 0000003a +0:19.2 98.l: 80000019 +0:19.2 9C.l: 00000046 +0:19.2 98.l: 80000030 +0:19.2 9C.l: 00000000 +0:19.2 98.l: 80000033 +0:19.2 9C.l: 00000032 +0:19.2 98.l: 80000036 +0:19.2 9C.l: 0000003a +0:19.2 98.l: 80000039 +0:19.2 9C.l: 00000043 Added: trunk/coreboot-v2/util/amdtools/example_input/lspci-cb-48G-667MHz-18.2-20090909e =================================================================== --- trunk/coreboot-v2/util/amdtools/example_input/lspci-cb-48G-667MHz-18.2-20090909e (rev 0) +++ trunk/coreboot-v2/util/amdtools/example_input/lspci-cb-48G-667MHz-18.2-20090909e 2009-10-28 19:41:52 UTC (rev 4886) @@ -0,0 +1,20 @@ +00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- +00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 +10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +40: 00 00 00 00 00 00 00 00 01 00 00 00 01 00 00 01 +50: 01 00 00 02 01 00 00 03 01 00 00 04 01 00 00 05 +60: 00 00 00 00 e0 3f f8 00 e0 3f f8 00 e0 3f f8 00 +70: 00 00 00 00 00 00 00 00 66 00 00 00 00 00 00 00 +80: 80 88 00 00 00 00 00 00 24 b2 68 e3 50 5b 02 49 +90: 10 e8 08 00 7a 80 00 a4 30 00 00 80 00 00 00 00 +a0: e9 02 00 e3 00 00 00 00 00 00 00 00 00 00 00 00 +b0: b4 57 88 f5 5a 00 00 00 7f 0c 6b 67 0c 48 00 01 +c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +d0: 9f 76 62 72 89 83 11 20 21 ad 9d 60 c6 a4 19 00 +e0: 8b 12 31 29 c9 42 89 24 40 4a 14 21 c6 24 01 23 +f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + Added: trunk/coreboot-v2/util/amdtools/example_input/lspci-prop-48G-667MHz-18.2 =================================================================== --- trunk/coreboot-v2/util/amdtools/example_input/lspci-prop-48G-667MHz-18.2 (rev 0) +++ trunk/coreboot-v2/util/amdtools/example_input/lspci-prop-48G-667MHz-18.2 2009-10-28 19:41:52 UTC (rev 4886) @@ -0,0 +1,19 @@ +00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- +00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 +10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +40: 00 00 00 00 00 00 00 00 01 00 00 00 01 00 00 01 +50: 01 00 00 02 01 00 00 03 01 00 00 04 01 00 00 05 +60: 00 00 00 00 e0 3f f8 00 e0 3f f8 00 e0 3f f8 00 +70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00 +80: 80 88 00 00 00 00 00 00 24 ca 69 e3 20 13 02 49 +90: 10 e8 00 00 7a 00 00 64 39 00 00 80 44 00 00 00 +a0: eb 02 00 e3 00 00 00 00 00 00 00 00 00 00 00 00 +b0: f4 d1 6e 45 9a 00 00 00 7f 0c 6b 77 4c 48 00 20 +c0: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 +d0: 9f 76 62 52 89 93 11 00 21 ad 95 60 c7 b4 19 01 +e0: 8b 16 31 29 c9 42 89 24 40 4a 14 21 c6 34 01 83 +f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Added: trunk/coreboot-v2/util/amdtools/k8-compare-pci-space.pl =================================================================== --- trunk/coreboot-v2/util/amdtools/k8-compare-pci-space.pl (rev 0) +++ trunk/coreboot-v2/util/amdtools/k8-compare-pci-space.pl 2009-10-28 19:41:52 UTC (rev 4886) @@ -0,0 +1,311 @@ +#!/usr/bin/perl -w +use Getopt::Long; + +use strict; + +my $NAME = $0; +my $VERSION = '0.01'; +my $DATE = '2009-09-04'; +my $AUTHOR = "Ward Vandewege <ward\(a)jhvc.com>"; +my $COPYRIGHT = "2009"; +my $LICENSE = "GPL v3 - http://www.fsf.org/licenses/gpl.txt"; +my $URL = "http://coreboot.org"; + +my $DEBUG = 0; + +our %info; +my %data; +my %printed; + +$|=1; + +&main(); + +sub version_information { + my ($NAME,$VERSION,$DATE,$COPYRIGHT,$AUTHOR,$LICENSE,$URL) = (shift,shift,shift,shift,shift,shift,shift); + print "\nThis is $NAME version $VERSION ($DATE)\n"; + print "Copyright (c) $COPYRIGHT by $AUTHOR\n"; + print "License: $LICENSE\n"; + print "More information at $URL\n\n"; + exit; +} + +sub usage_information { + my $retval = "\n$NAME v$VERSION ($DATE)\n"; + $retval .= "\nYou have not supplied all required parameters. $NAME takes these arguments:\n"; + $retval .= " $NAME -f <filename1> -f <filename2>\n\n"; + $retval .= " -f <filename1> is the name of a file with k8 memory configuration values\n"; + $retval .= " -f <filename2> is the name of a second file with k8 memory configuration values, to compare with filename1\n"; + $retval .= " -v (optional) provides version information\n"; + $retval .= "\nGenerate input files for this program with, for example, `lspci -s 00:18.2 -vvxxx`\n\n"; + print $retval; + exit; +} + +sub parse_file { + my $register = ''; + my $device = ''; + my $devreg = ''; + my $filename = shift; + my %data = @_; + open(TMP, $filename) || die "Could not open $filename: $!\n"; + while (<TMP>) { + chomp; + $device = $1 if (/^([a-f0-9]+:[a-f0-9]+\.[a-f0-9]+) /i); + next if (!(/^([a-f0-9]{2}): ([[a-f0-9 ]+)$/i)); + # Line format + # 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 +#print STDERR hex($1) . " ($1): $2\n"; + my $regoffset = hex($1); + my @values = split(/ /,$2); + for (my $i=0;$i<=$#values;$i++) { + $register = sprintf("%02x",$regoffset+$i); + my $packed = pack("H*",$values[$i]); # Pack our number so we can easily represent it in binary + $data{$device} = {} if (!defined($data{$device})); + $data{$device}{$register} = {} if (!defined($data{$device}{$register})); + $data{$device}{$register}{$filename} = $packed; +#print STDERR "$device -> $register -> ($filename) setting to $values[$i]\n"; + } + } + return %data; +} + +sub parse_file_old { + my $register = ''; + my $devreg = ''; + my $filename = shift; + my %data = @_; + open(TMP, $filename) || die "Could not open $filename: $!\n"; + while (<TMP>) { + chomp; + # Line format - pairs of lines: + # 0:18.2 98.l: 80000000 + # 0:18.2 9C.l: 10111222 + # First field is pci device. Second field is register offset (hex) + # where third field value (in hex) was read from. + my @tmp = split(/ /); + $tmp[1] =~ s/:$//; # strip optional trailing colon on second field + + my $device = $tmp[0]; + my $packed = pack("H*",$tmp[2]); # Pack our number so we can easily represent it in binary + my $binrep = unpack("B*", $packed); # Binary string representation + + if ($tmp[1] eq '98.l') { + $register = ($tmp[2] =~ /(..)$/)[0]; # last 2 digits are (hex) of what we wrote to the register, if second field is 98.l + $devreg = "$device $register"; + if ("$binrep" =~ /^1/) { + # bit 31 *must* be 1 if readout is to be correct + print "$tmp[0] - $register \n" if ($DEBUG); + } else { + print "ERROR: we read too fast: $tmp[2] does not have bit 31 set ($binrep)\n"; + exit; + } + } else { + # last field is register value (hex) + print "$tmp[2]h ($binrep) \n" if ($DEBUG); + $data{$devreg} = {} if (!defined($data{$devreg})); + $data{$devreg}{$filename} = $packed; + } + } + return %data; +} + +sub interpret_differences { + my $dev = shift; + my $reg = shift; + $reg = sprintf("%02s",$reg); + my $tag1 = shift; + my $val1 = shift; + my $tag2 = shift; + my $val2 = shift; + my $retval = ''; + my $retval2 = ''; + + # XOR values together - the positions with 1 after the XOR are the ones with the differences + my $xor = $val1 ^ $val2; + + my @val1 = split(//,unpack("B*",$val1)); + my @val2 = split(//,unpack("B*",$val2)); + my @xor = split(//,unpack("B*",$xor)); + + my %changed; + + my $decregbase = hex($reg) - (hex($reg) % 4); + + if (!exists($printed{$decregbase})) { + print "$dev $reg\n"; + print STDERR "$dev $reg\n"; + my $tmp = sprintf("%44s: %02x", $tag1, $decregbase) . ": "; + $tmp .= unpack("H*",$data{$dev}{sprintf("%02x", $decregbase+3)}{$tag1}) . " "; + $tmp .= unpack("H*",$data{$dev}{sprintf("%02x", $decregbase+2)}{$tag1}) . " "; + $tmp .= unpack("H*",$data{$dev}{sprintf("%02x", $decregbase+1)}{$tag1}) . " "; + $tmp .= unpack("H*",$data{$dev}{sprintf("%02x", $decregbase)}{$tag1}) . "\n"; + $tmp .= sprintf("%44s: %02x", $tag2, $decregbase) . ": "; + $tmp .= unpack("H*",$data{$dev}{sprintf("%02x", $decregbase+3)}{$tag2}) . " "; + $tmp .= unpack("H*",$data{$dev}{sprintf("%02x", $decregbase+2)}{$tag2}) . " "; + $tmp .= unpack("H*",$data{$dev}{sprintf("%02x", $decregbase+1)}{$tag2}) . " "; + $tmp .= unpack("H*",$data{$dev}{sprintf("%02x", $decregbase)}{$tag2}) . "\n"; + print "<pre>$tmp</pre>\n"; + $tmp = sprintf("%44s: %02x", $tag1, $decregbase) . ": "; + $tmp .= unpack("B*",$data{$dev}{sprintf("%02x", $decregbase+3)}{$tag1}) . " "; + $tmp .= unpack("B*",$data{$dev}{sprintf("%02x", $decregbase+2)}{$tag1}) . " "; + $tmp .= unpack("B*",$data{$dev}{sprintf("%02x", $decregbase+1)}{$tag1}) . " "; + $tmp .= unpack("B*",$data{$dev}{sprintf("%02x", $decregbase)}{$tag1}) . "\n"; + $tmp .= sprintf("%44s: %02x", $tag2, $decregbase) . ": "; + $tmp .= unpack("B*",$data{$dev}{sprintf("%02x", $decregbase+3)}{$tag2}) . " "; + $tmp .= unpack("B*",$data{$dev}{sprintf("%02x", $decregbase+2)}{$tag2}) . " "; + $tmp .= unpack("B*",$data{$dev}{sprintf("%02x", $decregbase+1)}{$tag2}) . " "; + $tmp .= unpack("B*",$data{$dev}{sprintf("%02x", $decregbase)}{$tag2}) . "\n"; + print "<pre>$tmp</pre>\n"; + $printed{$decregbase} = 1; + } + + if (!exists($info{$reg})) { + print STDERR "<pre>MISSING DATA for register $reg ($tag1) --- "; + print STDERR "$reg: " . unpack("H*",$data{$dev}{$reg}{$tag1}) . "</pre>\n"; + return ''; + } + + for (my $i=0; $i<=$#xor;$i++) { + my $invi = 31 - $i; + if ($xor[$i] eq '1') { +#print STDERR "REG: $reg INVI: $invi\n"; +#print STDERR $info{$reg}{'fields'}{$invi} . "\n"; +#print STDERR $info{$reg}{'fields'}{$invi}{'range'} . "\n"; + my $r = $info{$reg}{'fields'}{$invi}{'range'}; +# if (!exists($changed{$r})) { +# $changed{$r}{'v1'} = ''; +# $changed{$r}{'v2'} = ''; +# } +# $changed{$r}{'v1'} .= $val1[$i]; +# $changed{$r}{'v2'} .= $val2[$i]; + $changed{$r}{'v1'} = 1; + $changed{$r}{'v2'} = 1; + } + } + + foreach my $r (keys %changed) { + my $width = $info{$reg}{'ranges'}{$r}{'width'}; + #$changed{$r}{'v1'} = sprintf("%0" . $width . "sb",$changed{$r}{'v1'}); + #$changed{$r}{'v2'} = sprintf("%0" . $width . "sb",$changed{$r}{'v2'}); + #my $v1 = $changed{$r}{'v1'}; + #my $v2 = $changed{$r}{'v2'}; + my $v1 = substr(unpack("B*",$val1),31-$info{$reg}{'ranges'}{$r}{'end'},$info{$reg}{'ranges'}{$r}{'width'}) . 'b'; + my $v2 = substr(unpack("B*",$val2),31-$info{$reg}{'ranges'}{$r}{'end'},$info{$reg}{'ranges'}{$r}{'width'}) . 'b'; + + my $desc = $info{$reg}{'ranges'}{$r}{'description'}; + $desc =~ s/\n+/ /g; + + $retval2 .= $info{$reg}{'ranges'}{$r}{'function'} . " (" . $info{$reg}{'ranges'}{$r}{'mnemonic'} . ") - Bits ($r)" . " "; + $retval2 .= "  $desc" if ($desc ne ''); + + $v1 = $v1 . " (" . $info{$reg}{'ranges'}{$r}{'values'}{$v1} . ")" if (exists($info{$reg}{'ranges'}{$r}{'values'}{$v1})); + $v2 = $v2 . " (" . $info{$reg}{'ranges'}{$r}{'values'}{$v2} . ")" if (exists($info{$reg}{'ranges'}{$r}{'values'}{$v2})); + $retval2 .= sprintf("<a href=\"$tag1\">%44s</a>: %s\n",$tag1, $v1); + $retval2 .= sprintf("<a href=\"$tag2\">%44s</a>: %s\n",$tag2, $v2); + $retval2 .= ""; + } + + +# this prints out the bitwise differences. TODO: clean up + +# for (my $i=0; $i<=$#xor;$i++) { +# my $invi = 31 - $i; +# if ($xor[$i] eq '1') { +# my $m = $info{$reg}{'fields'}{$invi}{'mnemonic'}; +# my $f = $info{$reg}{'fields'}{$invi}{'function'}; +# my $range = $info{$reg}{'fields'}{$invi}{'range'}; +# if ($m && $f) { +# $retval2 .= "Bit $invi ($info{$reg}{'fields'}{$invi}{'mnemonic'} - $info{$reg}{'fields'}{$invi}{'function'}):\n"; +# $retval2 .= sprintf("%32s: %d\n",$tag1, $val1[$i]); +# $retval2 .= sprintf("%32s: %d\n",$tag2, $val2[$i]); +# } else { +# $retval2 .= "Bit $invi:\n"; +# $retval2 .= sprintf("%32s: %d\n",$tag1, $val1[$i]); +# $retval2 .= sprintf("%32s: %d\n",$tag2, $val2[$i]); +# } +# } +# } + + $retval .= "\n"; + if ($retval2 ne '') { + $retval .= "\n\n$retval2\n"; + my $n = $info{$reg}{'name'}; + my $d = $info{$reg}{'description'}; + $n ||= ''; + $d ||= ''; + my $old = $retval; + $retval = ''; + $retval .= sprintf("%40s -> %s \n","XOR",unpack("B*",$xor)) if ($DEBUG); + $retval .= "\n$n\n" if ($n ne ''); + $retval .= " $d" if ($d ne ''); + $retval .= $old; + $retval .= "\n"; + } + + return "<pre>$retval</pre>"; +} + +sub load_datafile { + my $file = 'bkdg.data'; + my $return = ''; + + if (-f $file) { + unless ($return = do $file) { + warn "couldn't parse $file: $@" if $@; + warn "couldn't do $file: $!" unless defined $return; + warn "couldn't run $file" unless $return; + } + } else { + print "Warning: data file '$file' not found - $0 will only report on differing bits without explanation.\n"; + } + +} + +sub main { + my @filenames; + my $version = 0; + + GetOptions ("filename=s" => \@filenames, "version" => \$version); + + &version_information($NAME,$VERSION,$DATE,$COPYRIGHT,$AUTHOR,$LICENSE,$URL) if ($version); + + &usage_information() if ($#filenames < 1); + + &load_datafile(); + + foreach my $file (@filenames) { + print STDERR "processing $file\n"; + %data = &parse_file($file,%data); + } + + print "<html>\n<body>\n"; + + foreach my $dev (sort keys %data) { + + foreach my $reg (sort keys %{$data{$dev}}) { + my $first = pack("H*",'00000000'); + my $firstfile = ''; + foreach my $file (reverse sort keys %{$data{$dev}{$reg}}) { + if (unpack("H*",$first) eq '00000000') { + $first = $data{$dev}{$reg}{$file}; + $firstfile = $file; + } + if (unpack("H*",$first) ne unpack("H*",$data{$dev}{$reg}{$file})) { + #my $reg = ($key =~ /\s+([a-z0-9]+)$/i)[0]; + if ($DEBUG) { + print "<pre>"; + printf("%44s -> %s (%s)\n",$firstfile,unpack("B*",$first),unpack("H*",$first)); + printf("%44s -> %s (%s)\n",$file,unpack("B*",$data{$dev}{$reg}{$file}),unpack("H*",$data{$dev}{$reg}{$file})); + print "</pre>"; + } + + print &interpret_differences($dev,$reg,$firstfile,$first,$file,$data{$dev}{$reg}{$file}); + } + } + } + } + print "</body>\n</html>\n"; + +} + Property changes on: trunk/coreboot-v2/util/amdtools/k8-compare-pci-space.pl ___________________________________________________________________ Added: svn:executable + * Added: trunk/coreboot-v2/util/amdtools/k8-interpret-extended-memory-settings.pl =================================================================== --- trunk/coreboot-v2/util/amdtools/k8-interpret-extended-memory-settings.pl (rev 0) +++ trunk/coreboot-v2/util/amdtools/k8-interpret-extended-memory-settings.pl 2009-10-28 19:41:52 UTC (rev 4886) @@ -0,0 +1,248 @@ +#!/usr/bin/perl -w +use Getopt::Long; + +use strict; + +my $NAME = $0; +my $VERSION = '0.01'; +my $DATE = '2009-09-04'; +my $AUTHOR = "Ward Vandewege <ward\(a)jhvc.com>"; +my $COPYRIGHT = "2009"; +my $LICENSE = "GPL v3 - http://www.fsf.org/licenses/gpl.txt"; +my $URL = "http://coreboot.org"; + +my $DEBUG = 0; + +our %info; + +$|=1; + +&main(); + +sub version_information { + my ($NAME,$VERSION,$DATE,$COPYRIGHT,$AUTHOR,$LICENSE,$URL) = (shift,shift,shift,shift,shift,shift,shift); + print "\nThis is $NAME version $VERSION ($DATE)\n"; + print "Copyright (c) $COPYRIGHT by $AUTHOR\n"; + print "License: $LICENSE\n"; + print "More information at $URL\n\n"; + exit; +} + +sub usage_information { + my $retval = "\n$NAME v$VERSION ($DATE)\n"; + $retval .= "\nYou have not supplied all required parameters. $NAME takes these arguments:\n"; + $retval .= " $NAME -f <filename1> -f <filename2>\n\n"; + $retval .= " -f <filename1> is the name of a file with k8 memory configuration values\n"; + $retval .= " -f <filename2> is the name of a second file with k8 memory configuration values, to compare with filename1\n"; + $retval .= " -v (optional) provides version information\n"; + $retval .= "\nSee the k8-read-mem-settings.sh script for an example of how to generate the input files to this script.\n\n"; + print $retval; + exit; +} + +sub parse_file { + my $register = ''; + my $devreg = ''; + my $filename = shift; + my %data = @_; + open(TMP, $filename) || die "Could not open $filename: $!\n"; + while (<TMP>) { + chomp; + # Line format - pairs of lines: + # 0:18.2 98.l: 80000000 + # 0:18.2 9C.l: 10111222 + # First field is pci device. Second field is register offset (hex) + # where third field value (in hex) was read from. + my @tmp = split(/ /); + $tmp[1] =~ s/:$//; # strip optional trailing colon on second field + + my $device = $tmp[0]; + my $packed = pack("H*",$tmp[2]); # Pack our number so we can easily represent it in binary + my $binrep = unpack("B*", $packed); # Binary string representation + + if ($tmp[1] eq '98.l') { + $register = ($tmp[2] =~ /(..)$/)[0]; # last 2 digits are (hex) of what we wrote to the register, if second field is 98.l + $devreg = "$device $register"; + if ("$binrep" =~ /^1/) { + # bit 31 *must* be 1 if readout is to be correct + print "$tmp[0] - $register \n" if ($DEBUG); + } else { + print "ERROR: we read too fast: $tmp[2] does not have bit 31 set ($binrep)\n"; + exit; + } + } else { + # last field is register value (hex) + print "$tmp[2]h ($binrep) \n" if ($DEBUG); + $data{$devreg} = {} if (!defined($data{$devreg})); + $data{$devreg}{$filename} = $packed; + } + } + return %data; +} + +sub interpret_differences { + my $reg = shift; + $reg = sprintf("%02s",$reg); + my $tag1 = shift; + my $val1 = shift; + my $tag2 = shift; + my $val2 = shift; + my $retval = ''; + my $retval2 = ''; + + # XOR values together - the positions with 1 after the XOR are the ones with the differences + my $xor = $val1 ^ $val2; + + my @val1 = split(//,unpack("B*",$val1)); + my @val2 = split(//,unpack("B*",$val2)); + my @xor = split(//,unpack("B*",$xor)); + + my %changed; + + if (!exists($info{$reg})) { + print STDERR "MISSING DATA for register $reg\n"; + return ''; + } + + for (my $i=0; $i<=$#xor;$i++) { + my $invi = 31 - $i; + if ($xor[$i] eq '1') { +#print STDERR "REG: $reg INVI: $invi\n"; +#print STDERR $info{$reg}{'fields'}{$invi} . "\n"; +#print STDERR $info{$reg}{'fields'}{$invi}{'range'} . "\n"; + my $r = $info{$reg}{'fields'}{$invi}{'range'}; +# if (!exists($changed{$r})) { +# $changed{$r}{'v1'} = ''; +# $changed{$r}{'v2'} = ''; +# } +# $changed{$r}{'v1'} .= $val1[$i]; +# $changed{$r}{'v2'} .= $val2[$i]; + $changed{$r}{'v1'} = 1; + $changed{$r}{'v2'} = 1; + } + } + + foreach my $r (keys %changed) { + my $width = $info{$reg}{'ranges'}{$r}{'width'}; + #$changed{$r}{'v1'} = sprintf("%0" . $width . "sb",$changed{$r}{'v1'}); + #$changed{$r}{'v2'} = sprintf("%0" . $width . "sb",$changed{$r}{'v2'}); + #my $v1 = $changed{$r}{'v1'}; + #my $v2 = $changed{$r}{'v2'}; + my $v1 = substr(unpack("B*",$val1),31-$info{$reg}{'ranges'}{$r}{'end'},$info{$reg}{'ranges'}{$r}{'width'}) . 'b'; + my $v2 = substr(unpack("B*",$val2),31-$info{$reg}{'ranges'}{$r}{'end'},$info{$reg}{'ranges'}{$r}{'width'}) . 'b'; + + my $desc = $info{$reg}{'ranges'}{$r}{'description'}; + $desc =~ s/\n+/ /g; + + $retval2 .= $info{$reg}{'ranges'}{$r}{'function'} . " (" . $info{$reg}{'ranges'}{$r}{'mnemonic'} . ") - Bits ($r)" . " "; + $retval2 .= "  $desc" if ($desc ne ''); + + $v1 = $v1 . " (" . $info{$reg}{'ranges'}{$r}{'values'}{$v1} . ")" if (exists($info{$reg}{'ranges'}{$r}{'values'}{$v1})); + $v2 = $v2 . " (" . $info{$reg}{'ranges'}{$r}{'values'}{$v2} . ")" if (exists($info{$reg}{'ranges'}{$r}{'values'}{$v2})); + $retval2 .= sprintf("<a href=\"$tag1\">%44s</a>: %s\n",$tag1, $v1); + $retval2 .= sprintf("<a href=\"$tag2\">%44s</a>: %s\n",$tag2, $v2); + $retval2 .= ""; + } + + +# this prints out the bitwise differences. TODO: clean up + +# for (my $i=0; $i<=$#xor;$i++) { +# my $invi = 31 - $i; +# if ($xor[$i] eq '1') { +# my $m = $info{$reg}{'fields'}{$invi}{'mnemonic'}; +# my $f = $info{$reg}{'fields'}{$invi}{'function'}; +# my $range = $info{$reg}{'fields'}{$invi}{'range'}; +# if ($m && $f) { +# $retval2 .= "Bit $invi ($info{$reg}{'fields'}{$invi}{'mnemonic'} - $info{$reg}{'fields'}{$invi}{'function'}):\n"; +# $retval2 .= sprintf("%32s: %d\n",$tag1, $val1[$i]); +# $retval2 .= sprintf("%32s: %d\n",$tag2, $val2[$i]); +# } else { +# $retval2 .= "Bit $invi:\n"; +# $retval2 .= sprintf("%32s: %d\n",$tag1, $val1[$i]); +# $retval2 .= sprintf("%32s: %d\n",$tag2, $val2[$i]); +# } +# } +# } + + $retval .= "\n"; + if ($retval2 ne '') { + $retval .= "\n\n$retval2\n"; + my $n = $info{$reg}{'name'}; + my $d = $info{$reg}{'description'}; + $n ||= ''; + $d ||= ''; + my $old = $retval; + $retval = ''; + $retval .= sprintf("%40s -> %s \n","XOR",unpack("B*",$xor)) if ($DEBUG); + $retval .= "\n$n\n" if ($n ne ''); + $retval .= " $d" if ($d ne ''); + $retval .= $old; + $retval .= "\n"; + } + + return "<pre>$retval</pre>"; +} + +sub load_datafile { + my $file = 'bkdg.data'; + my $return = ''; + + if (-f $file) { + unless ($return = do $file) { + warn "couldn't parse $file: $@" if $@; + warn "couldn't do $file: $!" unless defined $return; + warn "couldn't run $file" unless $return; + } + } else { + print "Warning: data file '$file' not found - $0 will only report on differing bits without explanation.\n"; + } + +} + +sub main { + my @filenames; + my $version = 0; + my %data; + + GetOptions ("filename=s" => \@filenames, "version" => \$version); + + &version_information($NAME,$VERSION,$DATE,$COPYRIGHT,$AUTHOR,$LICENSE,$URL) if ($version); + + &usage_information() if ($#filenames < 1); + + &load_datafile(); + + foreach my $file (@filenames) { + print STDERR "processing $file\n"; + %data = &parse_file($file,%data); + } + + print "<html>\n<body>\n"; + + foreach my $key (sort keys %data) { + my $first = pack("H*",'00000000'); + my $firstfile = ''; + foreach my $k2 (reverse sort keys %{$data{$key}}) { + if (unpack("H*",$first) eq '00000000') { + $first = $data{$key}{$k2}; + $firstfile = $k2; + } + if (unpack("H*",$first) ne unpack("H*",$data{$key}{$k2})) { + my $reg = ($key =~ /\s+([a-z0-9]+)$/i)[0]; + print "$key\n"; + if ($DEBUG) { + print "<pre>"; + printf("%44s -> %s (%s)\n",$firstfile,unpack("B*",$first),unpack("H*",$first)); + printf("%44s -> %s (%s)\n",$k2,unpack("B*",$data{$key}{$k2}),unpack("H*",$data{$key}{$k2})); + print "</pre>"; + } + + print &interpret_differences($reg,$firstfile,$first,$k2,$data{$key}{$k2}); + } + } + } + print "</body>\n</html>\n"; + +} + Property changes on: trunk/coreboot-v2/util/amdtools/k8-interpret-extended-memory-settings.pl ___________________________________________________________________ Added: svn:executable + * Added: trunk/coreboot-v2/util/amdtools/k8-read-mem-settings.sh =================================================================== --- trunk/coreboot-v2/util/amdtools/k8-read-mem-settings.sh (rev 0) +++ trunk/coreboot-v2/util/amdtools/k8-read-mem-settings.sh 2009-10-28 19:41:52 UTC (rev 4886) @@ -0,0 +1,25 @@ +#!/bin/bash + +# This is an example that generates data files that are understood by the +# k8-interpret-extended-memory-settings.pl script. Adjust the pci ids for your +# board (0:18.2 and 0:19.2 are correct for supermicro h8dme) + +# Ward Vandewege, 2009-09-04 + + +for OFFSET in 00, 01, 02, 03, 04, 05, 06, 07, 20, 21, 22, 23, 24, 25, 26, 27, 10, 13, 16, 19, 30, 33, 36, 39; do + + setpci -s 0:18.2 98.l=$OFFSET + echo 0:18.2 98.l: `setpci -s 0:18.2 98.l` + echo 0:18.2 9C.l: `setpci -s 0:18.2 9C.l` + +done + +for OFFSET in 00, 01, 02, 03, 04, 05, 06, 07, 20, 21, 22, 23, 24, 25, 26, 27, 10, 13, 16, 19, 30, 33, 36, 39; do + + setpci -s 0:19.2 98.l=$OFFSET + echo 0:19.2 98.l: `setpci -s 0:19.2 98.l` + echo 0:19.2 9C.l: `setpci -s 0:19.2 9C.l` + +done + Property changes on: trunk/coreboot-v2/util/amdtools/k8-read-mem-settings.sh ___________________________________________________________________ Added: svn:executable + * Added: trunk/coreboot-v2/util/amdtools/parse-bkdg.pl =================================================================== --- trunk/coreboot-v2/util/amdtools/parse-bkdg.pl (rev 0) +++ trunk/coreboot-v2/util/amdtools/parse-bkdg.pl 2009-10-28 19:41:52 UTC (rev 4886) @@ -0,0 +1,286 @@ +#!/usr/bin/perl -w + +my $NAME = $0; +my $VERSION = '0.01'; +my $DATE = '2009-09-04'; +my $AUTHOR = "Ward Vandewege <ward\(a)jhvc.com>"; +my $COPYRIGHT = "2009"; +my $LICENSE = "GPL v3 - http://www.fsf.org/licenses/gpl.txt"; +my $URL = "http://coreboot.org"; + +my $DEBUG = 0; + +use strict; + +# Run the bkdg for k8 through pdftotext first (from the poppler package) + +my @registers = (); +my $raw_register = ''; + +my $name = ''; +my $description = ''; +my $step = 0; +my $oldstep = 0; + +my $previous_res = 0; +my $previous_start = 0; +my $previous_stop = 0; +my $strip_empties = 0; + +my $previous_bits = ''; + +our %info; + +my %typos; + +$typos{'CkeDreStrength'} = 'CkeDrvStrength'; + +while (<>) { + my $line = $_; + chomp($line); + + foreach my $k (keys %typos) { + $line =~ s/$k/$typos{$k}/; + } + + # Make sure we do not include headers in our output + if (($line =~ /^Chapter 4/) || ($line =~ /Chapter 4$/)) { + $oldstep = $step; + $step = 99; + next; + } + if ($step == 99) { # header + if ($line =~ /Processors$/) { + $step = $oldstep; + $strip_empties = 1; + } + next; + } + + if ($strip_empties) { + # Headers are followed by two blank lines. Strip them. + if ($line =~ /^\s*$/) { + next; + } else { + $strip_empties = 0; + } + } + + + if (($step % 6 == 0) && ($line =~ /^\d+\.\d+\.\d+\s+(.*)$/)) { + $step = 1; + next; + } + if ($step == 1) { + $description = "$line\n"; + $step = 2; + next; + } + #print STDERR "STEP: $step\n"; + #print STDERR "$line\n"; + + if ((($step == 0) || ($step == 6) || ($step == 2)) && ($line =~ /^(.*)\s+Function\s+\d+:\s+Offset\s+..h$/)) { + $name = $1; + $name =~ s/ +$//; + $step = 3; + $description =~ s/\n+$//ms; + + if ($previous_bits ne '') { + &finish_record($previous_bits); + $previous_bits = ''; # reset previous_bits (used in step 6) + } + + + next; + } elsif ($step == 2) { + $description .= "$line\n"; + next; + } + + if (($step == 3) && ($line =~ /^\s+Index (.+h)$/)) { + $raw_register= $1; + @registers = split(/,/,$raw_register); + for (my $i=0;$i<=$#registers;$i++) { + $registers[$i] =~ s/ //g; + $registers[$i] =~ s/h$//; + } + # OK, we have our register(s), so now we can print out the name and description lines. + print "\$info{'$registers[0]'}{'name'} = \"$name\";\n"; + print "\$info{'$registers[0]'}{'description'} = \"$description\";\n"; + $step = 4; + next; + } + + if (($step == 4) && ($line =~ /^Bits\s+Mnemonic\s+Function\s+R\/W\s+Reset$/)) { + $step = 5; + next; + } + + if (($step == 5) && (!($line =~ /^Field Descriptions$/))) { + $line =~ s/^ +//; # Strip leading spaces + my @f = split(/ +/,$line); + + # skip blank lines + next if (!exists($f[0])); + + # skip headers (they could be repeated if the table crosses a page boundary + next if ($f[0] eq 'Bits'); + + # Clean up funky field separator + if ($f[0] =~ /\d+.+\d+/) { + $f[0] =~ s/[^\d]+/-/g; + } + + my ($start, $stop, $width) = (0,0,0); + if ($f[0] =~ /-/) { + $f[0] =~ s/^(\d+)[^\d]+(\d+)$/$1-$2/; + ($stop,$start) = ($1,$2); + $width = $stop-$start+1; + } else { + if ($f[0] =~ /^\d+$/) { + $start = $stop = $f[0]; + $width = 1; + } else { + # continuation from previous line + $start = $stop = $width = 0; + } + } + + # Some lines have only bit entries + if (($#f < 1) && ($f[0] =~ /^\d+(|\-\d+)/)) { + $f[4] = ''; + $f[3] = ''; + $f[2] = ''; + $f[1] = ''; + } elsif ($#f < 1) { + # Some lines are a continuation of the function field a line above + $f[4] = ''; + $f[3] = ''; + $f[2] = $f[0]; + $f[1] = ''; + $f[0] = ''; + my $tmp = "\$info{'$registers[0]'}{'ranges'}{" . $previous_res . "}{'function'} .= \"" . $f[2] . "\";\n"; + print &multiply($tmp,$previous_res,$previous_start,$previous_stop); + next; + } + + # Some lines have only bit and reset entries + if ($#f < 2) { + $f[4] = $f[1]; + $f[3] = ''; + $f[2] = ''; + $f[1] = ''; + } + + # Some lines have no mnemonic and no function + if ($#f < 3) { + $f[4] = $f[2]; + $f[3] = $f[1]; + $f[2] = ''; + $f[1] = ''; + } + + # functions with 'reserved' mnemonic have no function + if ($f[1] =~ /^reserved$/i) { + $f[4] = $f[3]; + $f[3] = $f[2]; + $f[2] = ''; + } + + $previous_res = $f[0]; + $previous_start = $start; + $previous_stop = $stop; + + # the 'range' field is not useful in this instance, but used in the 'fields' version of this block to easily go + # from a bit position to the corresponding range. + my $str = " +\$info{'$registers[0]'}{'ranges'}{'" . $f[0] . "'}{'function'} = \"" . $f[2] . "\"; +\$info{'$registers[0]'}{'ranges'}{'" . $f[0] . "'}{'mnemonic'} = \"" . $f[1] . "\"; +\$info{'$registers[0]'}{'ranges'}{'" . $f[0] . "'}{'description'} = \"" . "\"; +\$info{'$registers[0]'}{'ranges'}{'" . $f[0] . "'}{'begin'} = $start; +\$info{'$registers[0]'}{'ranges'}{'" . $f[0] . "'}{'end'} = $stop; +\$info{'$registers[0]'}{'ranges'}{'" . $f[0] . "'}{'width'} = $width; +\$info{'$registers[0]'}{'ranges'}{'" . $f[0] . "'}{'rw'} = \"" . $f[3] . "\"; +\$info{'$registers[0]'}{'ranges'}{'" . $f[0] . "'}{'reset'} = \"" . $f[4] . "\"; +\$info{'$registers[0]'}{'ranges'}{'" . $f[0] . "'}{'range'} = \"" . $f[0] . "\"; +"; + my $output; + + $output = &multiply($str,$f[0],$start,$stop); + + # Load the data structure here, too + eval($output); + + print $output . "\n\n"; + } elsif (($step == 5) && ($line =~ /^Field Descriptions$/)) { + $step = 6; + next; + } + + if ($step == 6) { + if ($line =~ /^(.*?)$(.*?)$.+Bit(s|) +(.*?)\. (.*)$/) { + my $bits = $4; + my $desc = $5; + $bits =~ s/[^\d]+/-/; + + if ($previous_bits ne '') { + # We're done with a field description block + print "\$info{'$registers[0]'}{'ranges'}{'$previous_bits'}{'description'} = \"" . $info{$registers[0]}{'ranges'}{$previous_bits}{'description'} . "\";\n"; + foreach my $k (keys %{$info{$registers[0]}{'ranges'}{$previous_bits}{'values'}}) { + print "\$info{'$registers[0]'}{'ranges'}{'$previous_bits'}{'values'}{'$k'} = \"" . $info{$registers[0]}{'ranges'}{$previous_bits}{'values'}{$k} . "\";\n"; + } + } + + if (exists($info{$registers[0]}{'ranges'}{$bits})) { + print STDERR "match ($bits) on $line\n"; + $info{$registers[0]}{'ranges'}{$bits}{'description'} = $desc . "\n"; + $previous_bits = $bits; + } + } elsif ($previous_bits ne '') { + $info{$registers[0]}{'ranges'}{$previous_bits}{'description'} .= $line . "\n"; + if ($line =~ /([0-9a-f]+b|[0-9a-f]+h) = (.*)$/i) { + $info{$registers[0]}{'ranges'}{$previous_bits}{'values'}{$1} = $2; + } + } + } + +} +&finish_record($previous_bits); + + +print "1;\n"; + +sub multiply { + my $str = shift; + my $range = shift; + my $start = shift; + my $stop = shift; + my $output = ''; + for (my $i=$start;$i<=$stop;$i++) { + my $tmp = $str; + $tmp =~ s/\{'$range'\}/{'$i'}/g; + $tmp =~ s/\{'ranges'\}/{'fields'}/g; + $tmp .= + $output .= $tmp; + } + + #$output .= $str if (($stop - $start + 1) > 1); + $output .= $str; + + return $output; +} + +sub finish_record { + my $previous_bits = shift; + # We're done with a field description block + print "\$info{'$registers[0]'}{'ranges'}{'$previous_bits'}{'description'} = \"" . $info{$registers[0]}{'ranges'}{$previous_bits}{'description'} . "\";\n"; + foreach my $k (keys %{$info{$registers[0]}{'ranges'}{$previous_bits}{'values'}}) { + print "\$info{'$registers[0]'}{'ranges'}{'$previous_bits'}{'values'}{'$k'} = \"" . $info{$registers[0]}{'ranges'}{$previous_bits}{'values'}{$k} . "\";\n"; + } + + # End of table. If this data applies to more than one register, print duplication lines. + for (my $i=1;$i<=$#registers;$i++) { + print "\$info{'$registers[$i]'} = \$info{'$registers[0]'};\n"; + } + +} Property changes on: trunk/coreboot-v2/util/amdtools/parse-bkdg.pl ___________________________________________________________________ Added: svn:executable + *

1 0

[v2] r4885 - trunk/coreboot-v2/src/northbridge
by svn＠coreboot.org 28 Oct '09

28 Oct '09

Author: stepan Date: 2009-10-28 20:40:46 +0100 (Wed, 28 Oct 2009) New Revision: 4885 Removed: trunk/coreboot-v2/src/northbridge/ibm/ trunk/coreboot-v2/src/northbridge/motorola/ Modified: trunk/coreboot-v2/src/northbridge/Kconfig trunk/coreboot-v2/src/northbridge/Makefile.inc Log: Drop remainders of PPC port Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Ronald G. Minnich <rminnich(a)gmail.com> Modified: trunk/coreboot-v2/src/northbridge/Kconfig =================================================================== --- trunk/coreboot-v2/src/northbridge/Kconfig 2009-10-28 19:38:58 UTC (rev 4884) +++ trunk/coreboot-v2/src/northbridge/Kconfig 2009-10-28 19:40:46 UTC (rev 4885) @@ -1,5 +1,3 @@ source src/northbridge/amd/Kconfig -#source src/northbridge/ibm/Kconfig source src/northbridge/intel/Kconfig -#source src/northbridge/motorola/Kconfig source src/northbridge/via/Kconfig Modified: trunk/coreboot-v2/src/northbridge/Makefile.inc =================================================================== --- trunk/coreboot-v2/src/northbridge/Makefile.inc 2009-10-28 19:38:58 UTC (rev 4884) +++ trunk/coreboot-v2/src/northbridge/Makefile.inc 2009-10-28 19:40:46 UTC (rev 4885) @@ -1,5 +1,3 @@ subdirs-y += amd -#subdirs-y += ibm subdirs-y += intel -#subdirs-y += motorola subdirs-y += via

1 0

[v2] r4884 - in trunk/coreboot-v2/src: . arch include/cpu
by svn＠coreboot.org 28 Oct '09

28 Oct '09

Author: stepan Date: 2009-10-28 20:38:58 +0100 (Wed, 28 Oct 2009) New Revision: 4884 Removed: trunk/coreboot-v2/src/arch/ppc/ trunk/coreboot-v2/src/include/cpu/ppc/ Modified: trunk/coreboot-v2/src/Kconfig Log: Drop remainder of PPC port Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Ronald G. Minnich <rminnich(a)gmail.com> Modified: trunk/coreboot-v2/src/Kconfig =================================================================== --- trunk/coreboot-v2/src/Kconfig 2009-10-28 18:57:06 UTC (rev 4883) +++ trunk/coreboot-v2/src/Kconfig 2009-10-28 19:38:58 UTC (rev 4884) @@ -51,7 +51,6 @@ source src/mainboard/Kconfig source src/arch/i386/Kconfig -source src/arch/ppc/Kconfig menu "Chipset"

1 0

build service results for r4882
by coreboot information 28 Oct '09

28 Oct '09

Dear coreboot readers! This is the automatic build system of coreboot. The developer "myles" checked in revision 4882 to the coreboot repository. This caused the following changes: Change Log: Make d945gclf build. Signed-off-by: Myles Watson <mylesgw(a)gmail.com> Acked-by: Myles Watson <mylesgw(a)gmail.com> Build Log: Configuration of intel:d945gclf has been fixed If something broke during this checkin please be a pain in myles's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, coreboot automatic build system

1 0

Re: [coreboot] [v2] r4883 - in trunk/coreboot-v2/src/mainboard: . digitallogic/adl855pc emulation/qemu-x86 intel/eagleheights msi/ms9185 tyan/s2850 tyan/s2875 tyan/s2880 tyan/s2881 tyan/s2882 tyan/s2885
by Myles Watson 28 Oct '09

28 Oct '09

These are the non-fam10 boards that still need help to build with Kconfig: intel_d945gclf msi_ms7135 supermicro_x6dhe_g supermicro_x6dhe_g2 technologic_ts5300 Thanks, Myles

1 0

[v2] r4883 - in trunk/coreboot-v2/src/mainboard: . digitallogic/adl855pc emulation/qemu-x86 intel/eagleheights msi/ms9185 tyan/s2850 tyan/s2875 tyan/s2880 tyan/s2881 tyan/s2882 tyan/s2885
by svn＠coreboot.org 28 Oct '09

28 Oct '09

Author: myles Date: 2009-10-28 19:57:06 +0100 (Wed, 28 Oct 2009) New Revision: 4883 Modified: trunk/coreboot-v2/src/mainboard/Makefile.k8_CAR.inc trunk/coreboot-v2/src/mainboard/Makefile.k8_ck804.inc trunk/coreboot-v2/src/mainboard/digitallogic/adl855pc/Kconfig trunk/coreboot-v2/src/mainboard/digitallogic/adl855pc/Options.lb trunk/coreboot-v2/src/mainboard/emulation/qemu-x86/Kconfig trunk/coreboot-v2/src/mainboard/intel/eagleheights/Makefile.inc trunk/coreboot-v2/src/mainboard/msi/ms9185/Kconfig trunk/coreboot-v2/src/mainboard/tyan/s2850/Makefile.inc trunk/coreboot-v2/src/mainboard/tyan/s2875/Makefile.inc trunk/coreboot-v2/src/mainboard/tyan/s2880/Makefile.inc trunk/coreboot-v2/src/mainboard/tyan/s2881/Makefile.inc trunk/coreboot-v2/src/mainboard/tyan/s2882/Makefile.inc trunk/coreboot-v2/src/mainboard/tyan/s2885/Makefile.inc Log: Fix some builds with Kconfig. Signed-off-by: Myles Watson <mylesgw(a)gmail.com> Acked-by: Myles Watson <mylesgw(a)gmail.com> Modified: trunk/coreboot-v2/src/mainboard/Makefile.k8_CAR.inc =================================================================== --- trunk/coreboot-v2/src/mainboard/Makefile.k8_CAR.inc 2009-10-28 18:51:47 UTC (rev 4882) +++ trunk/coreboot-v2/src/mainboard/Makefile.k8_CAR.inc 2009-10-28 18:57:06 UTC (rev 4883) @@ -49,11 +49,11 @@ ifdef POST_EVALUATION -$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.dsl - iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.dsl - mv dsdt.hex $@ +$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.dsl + iasl -p $(obj)/mainboard/$(MAINBOARDDIR)/dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.dsl + mv $(obj)/mainboard/$(MAINBOARDDIR)/dsdt.hex $@ -$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c +$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/mainboard/$(MAINBOARDDIR)/dsdt.c $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@ $(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c $(obj)/option_table.h Modified: trunk/coreboot-v2/src/mainboard/Makefile.k8_ck804.inc =================================================================== --- trunk/coreboot-v2/src/mainboard/Makefile.k8_ck804.inc 2009-10-28 18:51:47 UTC (rev 4882) +++ trunk/coreboot-v2/src/mainboard/Makefile.k8_ck804.inc 2009-10-28 18:57:06 UTC (rev 4883) @@ -53,11 +53,11 @@ ifdef POST_EVALUATION -$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.dsl - iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.dsl - mv dsdt.hex $@ +$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.dsl + iasl -p $(obj)/mainboard/$(MAINBOARDDIR)/dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.dsl + mv $(obj)/mainboard/$(MAINBOARDDIR)/dsdt.hex $@ -$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c +$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/mainboard/$(MAINBOARDDIR)/dsdt.c $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@ $(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c $(obj)/option_table.h Modified: trunk/coreboot-v2/src/mainboard/digitallogic/adl855pc/Kconfig =================================================================== --- trunk/coreboot-v2/src/mainboard/digitallogic/adl855pc/Kconfig 2009-10-28 18:51:47 UTC (rev 4882) +++ trunk/coreboot-v2/src/mainboard/digitallogic/adl855pc/Kconfig 2009-10-28 18:57:06 UTC (rev 4883) @@ -8,7 +8,6 @@ select HAVE_PIRQ_TABLE select UDELAY_TSC select BOARD_ROMSIZE_KB_1024 - select HAVE_HARD_RESET config MAINBOARD_DIR string Modified: trunk/coreboot-v2/src/mainboard/digitallogic/adl855pc/Options.lb =================================================================== --- trunk/coreboot-v2/src/mainboard/digitallogic/adl855pc/Options.lb 2009-10-28 18:51:47 UTC (rev 4882) +++ trunk/coreboot-v2/src/mainboard/digitallogic/adl855pc/Options.lb 2009-10-28 18:57:06 UTC (rev 4883) @@ -2,7 +2,6 @@ uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT -uses CONFIG_HAVE_HARD_RESET uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_USE_OPTION_TABLE uses CONFIG_ROM_PAYLOAD @@ -55,11 +54,6 @@ default CONFIG_GENERATE_MP_TABLE=0 ## -## Build code to reset the motherboard from coreboot -## -default CONFIG_HAVE_HARD_RESET=1 - -## ## use io based udelay function ## default CONFIG_UDELAY_IO=1 Modified: trunk/coreboot-v2/src/mainboard/emulation/qemu-x86/Kconfig =================================================================== --- trunk/coreboot-v2/src/mainboard/emulation/qemu-x86/Kconfig 2009-10-28 18:51:47 UTC (rev 4882) +++ trunk/coreboot-v2/src/mainboard/emulation/qemu-x86/Kconfig 2009-10-28 18:57:06 UTC (rev 4883) @@ -20,3 +20,8 @@ int default 6 depends on BOARD_EMULATION_QEMU_X86 + +config HAVE_INIT_TIMER + bool + default n + depends on BOARD_EMULATION_QEMU_X86 Modified: trunk/coreboot-v2/src/mainboard/intel/eagleheights/Makefile.inc =================================================================== --- trunk/coreboot-v2/src/mainboard/intel/eagleheights/Makefile.inc 2009-10-28 18:51:47 UTC (rev 4882) +++ trunk/coreboot-v2/src/mainboard/intel/eagleheights/Makefile.inc 2009-10-28 18:57:06 UTC (rev 4883) @@ -26,6 +26,13 @@ ifdef POST_EVALUATION +$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.dsl + iasl -p $(obj)/mainboard/$(MAINBOARDDIR)/dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.dsl + mv $(obj)/mainboard/$(MAINBOARDDIR)/dsdt.hex $@ + +$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/mainboard/$(MAINBOARDDIR)/dsdt.c + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@ + $(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/auto.c $(obj)/option_table.h $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/auto.c -o $@ perl -e 's/\.rodata/.rom.data/g' -pi $@ Modified: trunk/coreboot-v2/src/mainboard/msi/ms9185/Kconfig =================================================================== --- trunk/coreboot-v2/src/mainboard/msi/ms9185/Kconfig 2009-10-28 18:51:47 UTC (rev 4882) +++ trunk/coreboot-v2/src/mainboard/msi/ms9185/Kconfig 2009-10-28 18:57:06 UTC (rev 4883) @@ -12,7 +12,6 @@ select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET - select HAVE_ACPI_TABLES select IOAPIC select LIFT_BSP_APIC_ID select BOARD_ROMSIZE_KB_512 Modified: trunk/coreboot-v2/src/mainboard/tyan/s2850/Makefile.inc =================================================================== --- trunk/coreboot-v2/src/mainboard/tyan/s2850/Makefile.inc 2009-10-28 18:51:47 UTC (rev 4882) +++ trunk/coreboot-v2/src/mainboard/tyan/s2850/Makefile.inc 2009-10-28 18:57:06 UTC (rev 4883) @@ -1 +1 @@ -include $(src)/mainboard/Makefile.k8_ck804.inc +include $(src)/mainboard/Makefile.k8_CAR.inc Modified: trunk/coreboot-v2/src/mainboard/tyan/s2875/Makefile.inc =================================================================== --- trunk/coreboot-v2/src/mainboard/tyan/s2875/Makefile.inc 2009-10-28 18:51:47 UTC (rev 4882) +++ trunk/coreboot-v2/src/mainboard/tyan/s2875/Makefile.inc 2009-10-28 18:57:06 UTC (rev 4883) @@ -1 +1 @@ -include $(src)/mainboard/Makefile.k8_ck804.inc +include $(src)/mainboard/Makefile.k8_CAR.inc Modified: trunk/coreboot-v2/src/mainboard/tyan/s2880/Makefile.inc =================================================================== --- trunk/coreboot-v2/src/mainboard/tyan/s2880/Makefile.inc 2009-10-28 18:51:47 UTC (rev 4882) +++ trunk/coreboot-v2/src/mainboard/tyan/s2880/Makefile.inc 2009-10-28 18:57:06 UTC (rev 4883) @@ -1 +1 @@ -include $(src)/mainboard/Makefile.k8_ck804.inc +include $(src)/mainboard/Makefile.k8_CAR.inc Modified: trunk/coreboot-v2/src/mainboard/tyan/s2881/Makefile.inc =================================================================== --- trunk/coreboot-v2/src/mainboard/tyan/s2881/Makefile.inc 2009-10-28 18:51:47 UTC (rev 4882) +++ trunk/coreboot-v2/src/mainboard/tyan/s2881/Makefile.inc 2009-10-28 18:57:06 UTC (rev 4883) @@ -1,2 +1,3 @@ -include $(src)/mainboard/Makefile.k8_ck804.inc +include $(src)/mainboard/Makefile.k8_CAR.inc +obj-y += get_bus_conf.o driver-y += ../../../drivers/i2c/adm1027/adm1027.o Modified: trunk/coreboot-v2/src/mainboard/tyan/s2882/Makefile.inc =================================================================== --- trunk/coreboot-v2/src/mainboard/tyan/s2882/Makefile.inc 2009-10-28 18:51:47 UTC (rev 4882) +++ trunk/coreboot-v2/src/mainboard/tyan/s2882/Makefile.inc 2009-10-28 18:57:06 UTC (rev 4883) @@ -1 +1 @@ -include $(src)/mainboard/Makefile.k8_ck804.inc +include $(src)/mainboard/Makefile.k8_CAR.inc Modified: trunk/coreboot-v2/src/mainboard/tyan/s2885/Makefile.inc =================================================================== --- trunk/coreboot-v2/src/mainboard/tyan/s2885/Makefile.inc 2009-10-28 18:51:47 UTC (rev 4882) +++ trunk/coreboot-v2/src/mainboard/tyan/s2885/Makefile.inc 2009-10-28 18:57:06 UTC (rev 4883) @@ -1 +1,2 @@ -include $(src)/mainboard/Makefile.k8_ck804.inc +include $(src)/mainboard/Makefile.k8_CAR.inc +obj-y += get_bus_conf.o

1 0

← Newer
1
...
6
7
8
9
10
11
12
...
54
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot October 2009