coreboot March 2007

coreboot@coreboot.org

118 participants
226 discussions

Re: [LinuxBIOS] Problems on Compilation with abuild
by ccases＠navista.fr 07 Mar '07

07 Mar '07

> * ccases(a)navista.fr <ccases(a)navista.fr> [070307 09:04]: >> I use an Linux machine (debian and suse), for now it's ok I have change >> the language. but I have an error, only the fallback mode compil not the >> normal mode. > >> the message is : >> >> [..] >> VER_IMAGE='0' -Os -nostdinc -nostdlib -fno-builtin -Wall -o >> rom_stream.o >> /home/ccases/LinuxBIOSv2/src/stream/rom_stream.c >> /home/ccases/LinuxBIOSv2/src/stream/rom_stream.c:47:90: invalid suffix >> "x" >> on integer constant > > This is nasty. Some offset is getting negative. This indicates a problem > in your config file. Which target config.lb did you use? > > -- > coresystems GmbH â¢ Brahmsstr. 16 â¢ D-79104 Freiburg i. Br. > Tel.: +49 761 7668825 â¢ Fax: +49 761 7664613 > Email: info(a)coresystems.de â¢ http://www.coresystems.de/ > In LinuxBiosV2/targets/advantech/pcm-5823/Config.lb target pcm-5823 mainboard advantech/pcm-5823 option DEFAULT_CONSOLE_LOGLEVEL=8 option MAXIMUM_CONSOLE_LOGLEVEL=8 option CONFIG_COMPRESSED_PAYLOAD_NRV2B=1 option ROM_SIZE=(256*1024)-(128*1024)-(32*1024) option ROM_IMAGE_SIZE=64*1024 option FALLBACK_SIZE = ROM_SIZE romimage "normal" option USE_FALLBACK_IMAGE=0 option LINUXBIOS_EXTRA_VERSION=".0Normal" payload ../../../../etherboot-5.2.6/src/bin/rtl8139.elf end romimage "fallback" option USE_FALLBACK_IMAGE=1 option LINUXBIOS_EXTRA_VERSION=".0Fallback" payload ../../../../etherboot-5.2.6/src/bin/rtl8139.elf end buildrom ./linuxbios.rom ROM_SIZE "fallback" "normal" it's this file do you speak, or it's the file on ../src/mainboard/../../ thank's for your help CCASES

1 0

[LinuxBIOS] $9 POST card from China
by Quux 07 Mar '07

07 Mar '07

yo, I just grabbed my new post card from the mail box. The vendor, however betrayed me by 4 status LEDs for OSC , CLK, IRDY asf.. It's only got 4 LED in fact for power 3.3V ... +-5V. I don't think the others are overly useful anyway (only very rare cases). price is a real bargain, no wonder the 3 chips have scratched off labels - I guess it is a product copy to not be copied again. http://www.shentech.com/stemptpcitop.html the manual states a different card type which has a button to step through the error numbers manually. Seems it has a little inbuilt memory ? You cannot breakpoint the CPU via PCI-bus, afaik. It also states port 80h, 84h and 300h as standard ports for debug codes. -- Q

1 0

[LinuxBIOS] Problems on Compilation with abuild
by ccases＠navista.fr 07 Mar '07

07 Mar '07

Hi, If I use autobuild (abuild), I have this message : Processing mainboard/amd/quartet (i386: ok) Using existing test target /home/../LinuxBIOSv2/targets/amd/quartet/Config-abuild.lb ok Creating builddir...ok Compiling image ..FAILED after 4s! Log excerpt: /bin/sh: -c: line 1: syntax error near unexpected token `(' /bin/sh: -c: line 1: `gcc -Os -Wall -DARCH='i386' -DHAVE_MOVNTI='1' -DCROSS_COMPILE -DCC='gcc' -DHOSTCC='gcc' -DOBJCOPY='objcopy --gap-fill 0xff' -DLINUXBIOS_VERSION='"2.0.0"' -DLINUXBIOS_BUILD='"mar mar 6 11:06:48 CET 2007"' -DLINUXBIOS_COMPILE_TIME='"11:06:48"' -DLINUXBIOS_COMPILE_BY='"ccases"' -DLINUXBIOS_COMPILE_HOST='"TestBios"' -DLINUXBIOS_COMPILE_DOMAIN='"localdomain"' -DLINUXBIOS_COMPILER='"version gcc 3.3.5 (Debian 1:3.3.5-13)"' -DLINUXBIOS_LINKER='"GNU ld version 2.15"' -DLINUXBIOS_ASSEMBLER='"Version de l'assembleur GNU 2.15 (i386-linux) utilisant la version BFD 2.15"' -DCONFIG_USE_INIT='0' -DHAVE_FALLBACK_BOOT='1' -DHAVE_FAILOVER_BOOT='0' -DROM_IMAGE_SIZE='0x20000' -DPAYLOAD_SIZE='0x20000' -D_ROMBASE='0xfffa0000' -D_RESET='0xfffa0000' -D_EXCEPTION_VECTORS='0xfffa0100' -DSTACK_SIZE='0x2000' -DHEAP_SIZE='0x4000' -D_RAMBASE='0x4000' -DUSE_DCACHE_RAM='0' -DDCACHE_RAM_BASE='0xc0000' -DDCACHE_RAM_SIZE='0x1000' -DDCACHE_RAM_GLOBAL_VAR_SIZE='0x0' -DCONFIG_AP_CODE_IN_CAR='0' -DMEM_TRAIN_SEQ='0' -DWAIT_BEFORE_CPUS_INIT='0' -DCONFIG_COMPRESS='1' -DCONFIG_UNCOMPRESSED='0' -DCONFIG_LB_MEM_TOPK='2048' -DHAVE_OPTION_TABLE='1' -DUSE_OPTION_TABLE='1' -DLB_CKS_RANGE_START='49' -DLB_CKS_RANGE_END='122' -DLB_CKS_LOC='123' -DCRT0='/home/ccases/LinuxBIOSv2/src/arch/i386/init/crt0.S.lb' -DDEBUG='1' -DCONFIG_CONSOLE_VGA='0' -DCONFIG_CONSOLE_VGA_MULTI='0' -DCONFIG_CONSOLE_VGA_ONBOARD_AT_FIRST='0' -DCONFIG_CONSOLE_BTEXT='0' -DCONFIG_CONSOLE_LOGBUF='0' -DCONFIG_CONSOLE_SROM='0' -DCONFIG_CONSOLE_SERIAL8250='1' -DDEFAULT_CONSOLE_LOGLEVEL='8' -DMAXIMUM_CONSOLE_LOGLEVEL='8' -DCONFIG_SERIAL_POST='0' -DTTYS0_BASE='0x3f8' -DTTYS0_BAUD='115200' -DTTYS0_LCS='0x3' -DCONFIG_USE_PRINTK_IN_CAR='0' -DMAINBOARD='/home/ccases/LinuxBIOSv2/src/mainboard/amd/quartet' -DMAINBOARD_PART_NUMBER='"QUARTET"' -DMAINBOARD_VENDOR='"AMD"' -DMAINBOARD_PCI_SUBSYSTEM_VENDOR_ID='0' -DMAINBOARD_PCI_SUBSYSTEM_DEVICE_ID='0x0' -DCONFIG_MAX_PCI_BUSES='255' -DCONFIG_SMP='1' -DCONFIG_MAX_CPUS='4' -DCONFIG_MAX_PHYSICAL_CPUS='4' -DCONFIG_LOGICAL_CPUS='0' -DSERIAL_CPU_INIT='1' -DAPIC_ID_OFFSET='0' -DENABLE_APIC_EXT_ID='0' -DLIFT_BSP_APIC_ID='0' -DCONFIG_IDE_PAYLOAD='0' -DCONFIG_ROM_PAYLOAD='1' -DCONFIG_ROM_PAYLOAD_START='0xfff80000' -DCONFIG_COMPRESSED_PAYLOAD_NRV2B='0' -DCONFIG_COMPRESSED_PAYLOAD_LZMA='0' -DCONFIG_PRECOMPRESSED_PAYLOAD='0' -DCONFIG_SERIAL_PAYLOAD='0' -DCONFIG_FS_PAYLOAD='0' -DCONFIG_FS_EXT2='0' -DCONFIG_FS_ISO9660='0' -DCONFIG_FS_FAT='0' -DAUTOBOOT_DELAY='2' -DAUTOBOOT_CMDLINE='"hdc1:/vmlinuz root=/dev/hdc3 console=tty0 console=ttyS0,115200"' -DUSE_WATCHDOG_ON_BOOT='0' -DCONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT='1' -DCONFIG_AGP_PLUGIN_SUPPORT='1' -DCONFIG_CARDBUS_PLUGIN_SUPPORT='1' -DCONFIG_PCIX_PLUGIN_SUPPORT='1' -DCONFIG_PCIEXP_PLUGIN_SUPPORT='1' -DCONFIG_IDE='0' -DIDE_BOOT_DRIVE='0' -DIDE_OFFSET='0' -DPCI_IO_CFG_EXT='0' -DCONFIG_CHIP_NAME='0' -DHAVE_INIT_TIMER='1' -DMAX_REBOOT_CNT='3' -DFAKE_SPDROM='0' -DHAVE_ACPI_TABLES='0' -DACPI_SSDTX_NUM='0' -DHT_CHAIN_UNITID_BASE='1' -DHT_CHAIN_END_UNITID_BASE='32' -DSB_HT_CHAIN_UNITID_OFFSET_ONLY='1' -DSB_HT_CHAIN_ON_BUS0='0' -DPCI_BUS_SEGN_BITS='0' -DMMCONF_SUPPORT='0' -DHW_MEM_HOLE_SIZEK='0' -DHW_MEM_HOLE_SIZE_AUTO_INC='0' -DK8_HT_FREQ_1G_SUPPORT='0' -DK8_REV_F_SUPPORT='0' -DCBB='0' -DCDB='24' -DDIMM_SUPPORT='0x108' -DCPU_SOCKET_TYPE='16' -DCPU_ADDR_BITS='40' -DCONFIG_PCI_ROM_RUN='0' -DCONFIG_PCI_64BIT_PREF_MEM='0' -DHAVE_MP_TABLE='1' -DHAVE_PIRQ_TABLE='1' -DUSE_FALLBACK_IMAGE='0' -DHAVE_HARD_RESET='1' -DIRQ_SLOT_COUNT='9' -DCONFIG_IOAPIC='1' -DFALLBACK_SIZE='0x40000' -DROM_SIZE='0x80000' -DROM_SECTION_SIZE='0x40000' -DROM_SECTION_OFFSET='0x0' -DXIP_ROM_SIZE='0x10000' -DXIP_ROM_BASE='0xfffb0000' -DLINUXBIOS_EXTRA_VERSION='".0-normal"' -DMAINBOARD_POWER_ON_AFTER_POWER_FAIL='MAINBOARD_POWER_ON' -DCONFIG_UDELAY_IO='0' -DUSE_FAILOVER_IMAGE='0' -DAGP_APERTURE_SIZE='0x4000000' -DCONFIG_UDELAY_TSC='0' -DCONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2='0' /home/ccases/LinuxBIOSv2/util/options/build_opt_tbl.c -o build_opt_tbl' make[1]: *** [build_opt_tbl] Erreur 2 make[1]: Leaving directory `/home/ccases/LinuxBIOSv2/util/abuild/linuxbios-builds/amd_quartet/normal' make: *** [normal/linuxbios.rom] Erreur 1 It's the same message for all of the mainboard, I use debian and suse the last version, debian have gcc 3.3.5 & cpp 3.3.5 and suse have gcc 4.0.2 & cpp 4.0.2 I don't understand why the compilation doesn't work, if you have an idea ? thank's by advance CCases

4 10

[LinuxBIOS] tyan S4882 etherboot failure
by lwhuq 07 Mar '07

07 Mar '07

Hi All, I'm going to boot linuxbios by etherboot on tyan s4882 box. It halts when display: "Searching for server (DHCP)...". here is DHCP server's syslog: Mar 7 15:17:00 localhost dhcpd: DHCPDISCOVER from 00:e0:81:55:ca:3f via eth0 Mar 7 15:17:00 localhost dhcpd: DHCPOFFER on 192.168.1.5 to 00:e0:81:55:ca:3f via eth0 Mar 7 15:17:42 localhost dhcpd: DHCPDISCOVER from 00:e0:81:55:ca:3f via eth0 Mar 7 15:17:42 localhost dhcpd: DHCPOFFER on 192.168.1.5 to 00:e0:81:55:ca:3f via eth0 Mar 7 15:19:05 localhost dhcpd: DHCPDISCOVER from 00:e0:81:55:ca:3f via eth0 Mar 7 15:19:05 localhost dhcpd: DHCPOFFER on 192.168.1.5 to 00:e0:81:55:ca:3f via eth0 Mar 7 15:21:51 localhost dhcpd: DHCPDISCOVER from 00:e0:81:55:ca:3f via eth0 Mar 7 15:21:51 localhost dhcpd: DHCPOFFER on 192.168.1.5 to 00:e0:81:55:ca:3f via eth0 It seams that s4882 request ip distribution all the time. My rom image is tg3.zelf followed http://www.linuxbios.org/Etherboot. Thanks for any suggestions.

1 0

Re: [LinuxBIOS] Dell P133v
by John Talbut 06 Mar '07

06 Mar '07

Uwe Hermann wrote: > [Please always reply to the mailing list, not individual developers] > > On Tue, Feb 27, 2007 at 12:51:05PM +0000, John Talbut wrote: >> Hi >> >> Thanks for your response. >> >> I cannot get an lspci at the moment, I cannot get enough of a system >> running on the box. What information do you need in particular? >> >> According to >> http://support.euro.dell.com/support/edocs/dta/%5Fhannbl/00000013.htm the >> super I/O is SMC FDC37C93XFR . The BIOS chip is soldered on, I think. I >> have not been able to find it, but it seems that only cache and video >> memory is plugged in. >> >> John >> >> Uwe Hermann wrote: >>> Hi, >>> >>> On Wed, Feb 21, 2007 at 02:55:20PM +0000, John Talbut wrote: >>>> I would like to know the position with regard to LinuxBIOS support for my >>>> machine. >>>> >>>> It is a Dell Dimension P133v. It seems to defy normal methods of >>>> identifying the motherboard (eg from a BIOS code). The Intel chips are >>>> SB82371SB and SB82437VX. There is a code AA654154-305 which I think is >>>> an Intel identifier, but they do not list it. The BIOS is simply >>>> identifies as Version A02. >>> It's not supported out of the box, but maybe we can get it working... >>> >>> Can you send the lspci output for the box? >>> >>> What Super I/O does it use? Is the BIOS chip (PLCC or DIP?) socketed or >>> soldered on? >>> >>> >>> Uwe. OK, I have managed to get an lspci: 00:00.0 Host bridge: Intel Corp. 430VX - 82437VX TVX [Triton VX] (rev 01) 00:07.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01) 00:07.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II] 00:08.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev 53) 00:0f.0 Ethernet controller: Unknown device 168c:0013 (rev 01) (I think the Ethernet controller is a wifi card) John

1 0

[LinuxBIOS] r2570 build service
by LinuxBIOS information 06 Mar '07

06 Mar '07

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "uwe" checked in revision 2570 to the LinuxBIOS source repository and caused the following changes: Change Log: The attached patch adds additional PCI IDs for MCP55 LPC devices to flashrom. 0x0360 is needed to support the DFI LANParty NF590SLI, and I am deducing the others based on pci_ids.h in the Linux kernel. Signed-off-by: Ed Swierk <eswierk(a)arastra.com> Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Build Log: Compilation of gigabyte:m57sli is still broken Configuration of msi:ms9282 is still broken Compilation of nvidia:l1_2pvv is still broken Compilation of supermicro:h8dmr is still broken Compilation of tyan:s2912 is still broken If something broke during this checkin please be a pain in uwe's neck until the issue is fixed. If this issue is not fixed within 24h the revision will be backed out. Yours truely, LinuxBIOS automatic build system

1 0

[LinuxBIOS] [PATCH] Additional MCP55 LPC PCI IDs for flashrom
by Ed Swierk 06 Mar '07

06 Mar '07

The attached patch adds additional PCI IDs for MCP55 LPC devices to flashrom. 0x0360 is needed to support the DFI LANParty NF590SLI, and I am deducing the others based on pci_ids.h in the Linux kernel. Perhaps Yinghai can confirm that these are correct. Signed-off-by: Ed Swierk <eswierk(a)arastra.com> --Ed

3 3

[LinuxBIOS] r2570 - trunk/LinuxBIOSv2/util/flashrom
by svn＠openbios.org 06 Mar '07

06 Mar '07

Author: uwe Date: 2007-03-07 00:49:49 +0100 (Wed, 07 Mar 2007) New Revision: 2570 Modified: trunk/LinuxBIOSv2/util/flashrom/flash_enable.c Log: The attached patch adds additional PCI IDs for MCP55 LPC devices to flashrom. 0x0360 is needed to support the DFI LANParty NF590SLI, and I am deducing the others based on pci_ids.h in the Linux kernel. Signed-off-by: Ed Swierk <eswierk(a)arastra.com> Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/LinuxBIOSv2/util/flashrom/flash_enable.c =================================================================== --- trunk/LinuxBIOSv2/util/flashrom/flash_enable.c 2007-03-03 15:01:29 UTC (rev 2569) +++ trunk/LinuxBIOSv2/util/flashrom/flash_enable.c 2007-03-06 23:49:49 UTC (rev 2570) @@ -461,7 +461,12 @@ {0x10de, 0x0263, "NVidia MCP51", enable_flash_ck804}, {0x10de, 0x0360, "NVIDIA MCP55", enable_flash_mcp55}, // Gigabyte m57sli-s4 + {0x10de, 0x0361, "NVIDIA MCP55", enable_flash_mcp55}, // LPC + {0x10de, 0x0362, "NVIDIA MCP55", enable_flash_mcp55}, // LPC + {0x10de, 0x0363, "NVIDIA MCP55", enable_flash_mcp55}, // LPC {0x10de, 0x0364, "NVIDIA MCP55", enable_flash_mcp55}, // LPC + {0x10de, 0x0365, "NVIDIA MCP55", enable_flash_mcp55}, // LPC + {0x10de, 0x0366, "NVIDIA MCP55", enable_flash_mcp55}, // LPC {0x10de, 0x0367, "NVIDIA MCP55", enable_flash_mcp55}, // Pro {0x1002, 0x4377, "ATI SB400", enable_flash_sb400}, // ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)

1 0

[LinuxBIOS] Problems booting off Epia MII compact flash (filo)
by John Koleszar 06 Mar '07

06 Mar '07

Hi all, I'm working on my first LinuxBios install on a Via Epia MII 12000 and am having some problems with filo. I seem to have everything built mostly correct, as I'm able to get to the filo boot prompt and invoke memtest86 (with VGA) from an iso9660 fs on hdc. When trying to boot off of the onboard CF (hde) I get the following error: boot: hde1:/bzImage console=ttyS0,115200 malloc_diag: alloc: 368 bytes (5 blocks), free: 16008 bytes (1 blocks) malloc_diag: alloc: 384 bytes (6 blocks), free: 15992 bytes (1 blocks) file_open: dev=hde1, path=/bzImage find_ide_controller: PCI IDE #1 not found IDE channel 2 not found devopen: failed to open ide malloc_diag: alloc: 368 bytes (5 blocks), free: 16008 bytes (1 blocks) malloc_diag: alloc: 320 bytes (4 blocks), free: 16056 bytes (1 blocks) boot: hde1:/bzImage console=ttyS0,115200 My filo Config and a complete debug log is attached. I suspect that my problem is with my filo build rather than linuxbios, though I've checked my config against all the examples and documentation I could find, and nothing jumps out at me. I'm running filo r32 and linuxbios r2567. Anyone point me in the right direction? Thanks, John # !!! NOTE !!! # Do NOT add spaces or comments at the end of option lines. # It confuses some versions of make. # Use grub instead of autoboot? #USE_GRUB = 1 # Grub menu.lst path #MENULST_FILE = "hda3:/boot/filo/menu.lst" # Via Epia-MII CF boot: #MENULST_FILE = "hde1:/boot/filo/menu.lst" # time before default menu.lst is chosen. Set to 0 to ignore #MENULST_TIMEOUT = 0 # Image filename for automatic boot and optional command line parameter AUTOBOOT_FILE = "hde1:/bzImage console=ttyS0,115200" #AUTOBOOT_FILE = "hda1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200" #AUTOBOOT_FILE = "mem@0xfff80000" #AUTOBOOT_FILE = "hde1@0" #AUTOBOOT_FILE = "uda1:/vmlinuz.elf" # Time in second before booting AUTOBOOT_FILE AUTOBOOT_DELAY = 2 # Driver for hard disk, CompactFlash, and CD-ROM on IDE bus IDE_DISK = 1 # Add a short delay when polling status registers # (required on some broken SATA controllers) # NOTE: Slows down access significantly, so disable # whenever possible. #IDE_DISK_POLL_DELAY = 1 # Use PCMCIA compact flash on Via Epia MII10000 and MII6000E # This device is referred to as hde. PCMCIA_CF = 1 # Driver for USB Storage USB_DISK = 1 # VGA text console #VGA_CONSOLE = 1 #PC_KEYBOARD = 1 # Serial console SERIAL_CONSOLE = 1 SERIAL_IOBASE = 0x3f8 # if SERIAL_SPEED is commented out, the speed will not be changed. #SERIAL_SPEED = 115200 # Filesystems FSYS_EXT2FS = 1 FSYS_FAT = 1 #FSYS_JFS = 1 #FSYS_MINIX = 1 #FSYS_REISERFS = 1 #FSYS_XFS = 1 FSYS_ISO9660 = 1 # Support for boot disk image in bootable CD-ROM (El Torito) ELTORITO = 1 # PCI support SUPPORT_PCI = 1 # Enable this to scan PCI busses above bus 0 # AMD64 based boards do need this. PCI_BRUTE_SCAN = 1 # Sound support (needs SUPPORT_PCI) #SUPPORT_SOUND = 1 # Sound drivers #VIA_SOUND = 1 # Debugging DEBUG_ALL = 1 #DEBUG_ELFBOOT = 1 #DEBUG_ELFNOTE = 1 #DEBUG_LINUXBIOS = 1 #DEBUG_MALLOC = 1 #DEBUG_MULTIBOOT = 1 #DEBUG_SEGMENT = 1 #DEBUG_SYS_INFO = 1 #DEBUG_TIMER = 1 #DEBUG_BLOCKDEV = 1 #DEBUG_PCI = 1 #DEBUG_VIA_SOUND = 1 #DEBUG_LINUXLOAD = 1 #DEBUG_IDE = 1 #DEBUG_USB = 1 #DEBUG_ELTORITO = 1 # i386 options # Loader for standard Linux kernel image, a.k.a. /vmlinuz LINUX_LOADER = 1 # Boot FILO from Multiboot loader (eg. GRUB) #MULTIBOOT_IMAGE = 1

4 6

[LinuxBIOS] [Fwd: Re: Problems on Compilation with abuild]
by ccases＠navista.fr 06 Mar '07

06 Mar '07

> On Tue, Mar 06, 2007 at 03:55:27PM +0100, ccases(a)navista.fr wrote: >> It's ok now he compil in fallback not in normal, what is with the >> config on which I am to rest to make my files (iei nova4899r, >> because it's the same technologie of mainboard) > > Sorry, I don't understand you. > > Is there a problem still? Could you provide an error message? > > >> thank's for your help ;) > > You're welcome! > > > //Peter > > -- > linuxbios mailing list > linuxbios(a)linuxbios.org > http://www.openbios.org/mailman/listinfo/linuxbios > Error Message : /home/ccases/LinuxBIOSv2/src/stream/rom_stream.c:47:90: invalid suffix "x" on integer constant /home/ccases/LinuxBIOSv2/src/stream/rom_stream.c: In function `stream_init': /home/ccases/LinuxBIOSv2/src/stream/rom_stream.c:83: warning: comparison between pointer and integer /home/ccases/LinuxBIOSv2/src/stream/rom_stream.c:83: warning: comparison between pointer and integer /home/ccases/LinuxBIOSv2/src/stream/rom_stream.c:84: warning: assignment makes pointer from integer without a cast make[1]: *** [rom_stream.o] Error 1 make[1]: Leaving directory `/home/ccases/LinuxBIOSv2/targets/advantech/pcm-5823/pcm-5823/normal' make: *** [normal/linuxbios.rom] Error 1 It's an error in the config file I think !! Thank's for your help Regards CCases

1 0

← Newer
1
...
14
15
16
17
18
19
20
...
23
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot March 2007