coreboot October 2007

coreboot@coreboot.org

84 participants
481 discussions

Start a nNew thread

[LinuxBIOS] superiotool - dump support for fdc37b78x
by Robinson Tryon 07 Oct '07

07 Oct '07

Signed-off-by: Robinson P. Tryon <bishop.robinson(a)gmail.com> (This patch builds on the b272x patch)

3 2

[LinuxBIOS] r2830 - trunk/util/superiotool
by svn＠openbios.org 07 Oct '07

07 Oct '07

Author: uwe Date: 2007-10-07 17:04:17 +0200 (Sun, 07 Oct 2007) New Revision: 2830 Modified: trunk/util/superiotool/smsc.c Log: Dump support for the SMSC FDC37B78x. Signed-off-by: Robinson P. Tryon <bishop.robinson(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/util/superiotool/smsc.c =================================================================== --- trunk/util/superiotool/smsc.c 2007-10-07 14:33:13 UTC (rev 2829) +++ trunk/util/superiotool/smsc.c 2007-10-07 15:04:17 UTC (rev 2830) @@ -43,6 +43,47 @@ {0x42, "FDC37B80x", { {EOT}}}, {0x44, "FDC37B78x", { + {NOLDN, NULL, + {0x03,0x07,0x20,0x21,0x22,0x23,0x24,0x26,0x27,0x28, + 0x2b,0x2c,0x2d,0x2e,0x2f,EOT}, + {0x03,NANA,0x44,0x00,0x00,0x00,0x04,MISC,MISC,0x00, + NANA,NANA,NANA,NANA,NANA,EOT}}, + {0x0, "Floppy", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,0xf5, + EOT}, + {0x00,0x03,0xf0,0x06,0x02,0x0e,0x00,0xff,0x00,0x00, + EOT}}, + {0x3, "Parallel port", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,EOT}, + {0x00,0x00,0x00,0x00,0x04,0x3c,0x00,EOT}}, + {0x4, "COM1", + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x00,0x00,0x00,0x00,0x00,EOT}}, + {0x5, "COM2", + {0x30,0x60,0x61,0x62,0x63,0x70,0x74,0xf0,0xf1,0xf2, + EOT}, + {NANA,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x02,0x03, + EOT}}, + {0x6, "Real-time clock (RTC)", + {0x30,0x62,0x63,0x70,0xf0,EOT}, + {0x00,0x00,0x70,0x00,0x00,EOT}}, + {0x7, "Keyboard", + {0x30,0x70,0x72,0xf0,EOT}, + {0x00,0x00,0x00,0x00,EOT}}, + {0x8, "Aux I/O", + {0x30,0xb0,0xb1,0xb2,0xb3,0xb8,0xc0,0xc1,0xc2,0xc3, + 0xc4,0xc5,0xc6,0xc8,0xca,0xcb,0xcc,0xd0,0xd1,0xd2, + 0xd3,0xd4,0xd5,0xd6,0xd7,0xe0,0xe1,0xe2,0xe3,0xe4, + 0xe5,0xe6,0xe7,0xef,0xf0,0xf1,0xf2,0xf3,0xf4,0xf6, + 0xf9,0xfa,EOT}, + {0x00,NANA,NANA,NANA,NANA,NANA,NANA,0x01,NANA,NANA, + NANA,0x00,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA, + NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA, + NANA,NANA,NANA,NANA,NANA,0x00,0x00,0x00,0x00,NANA, + NANA,NANA,EOT}}, + {0xa, "ACPI", + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x00,0x00,0x00,NANA,NANA,EOT}}, {EOT}}}, {0x4c, "FDC37B72x", { {EOT}}},

1 0

[LinuxBIOS] r2829 - trunk/util/superiotool
by svn＠openbios.org 07 Oct '07

07 Oct '07

Author: uwe Date: 2007-10-07 16:33:13 +0200 (Sun, 07 Oct 2007) New Revision: 2829 Modified: trunk/util/superiotool/smsc.c Log: Dump support for the SMSC FDC37M81x. Signed-off-by: Robinson P. Tryon <bishop.robinson(a)gmail.com> Acked-by: Peter Stuge <peter(a)stuge.se> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/util/superiotool/smsc.c =================================================================== --- trunk/util/superiotool/smsc.c 2007-10-05 21:58:03 UTC (rev 2828) +++ trunk/util/superiotool/smsc.c 2007-10-07 14:33:13 UTC (rev 2829) @@ -47,6 +47,36 @@ {0x4c, "FDC37B72x", { {EOT}}}, {0x4d, "FDC37M81x", { + {NOLDN, NULL, + {0x03,0x07,0x20,0x21,0x22,0x23,0x24,0x26,0x27,0x2b, + 0x2c,0x2d,0x2e,0x2f,EOT}, + {0x03,0x00,0x4d,NANA,0x00,0x00,0x04,MISC,MISC,NANA, + NANA,NANA,NANA,NANA,EOT}}, + {0x0, "Floppy", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4, + 0xf5,EOT}, + {0x00,0x03,0xf0,0x06,0x02,0x0e,0x00,0xff,0x00, + 0x00,EOT}}, + {0x3, "Parallel port", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,EOT}, + {0x00,0x00,0x00,0x00,0x04,0x3c,0x00,EOT}}, + {0x4, "COM1", + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x00,0x00,0x00,0x00,0x00,EOT}}, + {0x5, "COM2", + {0x30,0x60,0x61,0x62,0x63,0x70,0xf0,0xf1,0xf2,EOT}, + {0x00,0x00,0x00,RSVD,RSVD,0x00,0x00,0x02,0x03,EOT}}, + {0x7, "Keyboard", + {0x30,0x70,0x72,0xf0,EOT}, + {0x00,0x00,0x00,0x00,EOT}}, + {0x8, "Aux I/O", + /* Only 0xf6 existing (and reserved) or 0xf6..0xfb? */ + {0x30,0xb4,0xb5,0xb6,0xb7,0xc0,0xc1,0xc2,0xc3,0xc4, + 0xc5,0xc6,0xc7,0xc8,0xf1,0xf2,0xf3,0xf4,0xf6,0xf7, + 0xf8,0xf9,0xfa,0xfb,EOT}, + {0x00,NANA,NANA,NANA,NANA,0x02,0x01,NANA,NANA,NANA, + NANA,NANA,NANA,NANA,0x00,0x00,0x00,0x00,RSVD,RSVD, + RSVD,RSVD,RSVD,RSVD,EOT}}, {EOT}}}, {0x47, "FDC37M60x", { {EOT}}},

1 0

[LinuxBIOS] Flashrom: support for At29C010A added.
by Peter Lemenkov 07 Oct '07

07 Oct '07

2007/10/7, Uwe Hermann <uwe(a)hermann-uwe.de>: > On Sun, Oct 07, 2007 at 03:22:24PM +0400, Peter Lemenkov wrote: > > Very simple patch - easy to review. Unfortunately I still not tested > > it on real hardware (due to lack of AT-power supply). > > Looks good, but please report with a Signed-off-by, see > http://linuxbios.org/index.php/Development_Guidelines#Sign-off_Procedure OK. I applied my patch again with a signature below: Signed-off-by: Peter Lemenkov <lemenkov(a)gmail.com> > Can you test this soonish on hardware or can someone else on the list > test it? I'll be able to test in a week or two - I need to find AT power supply for my board. If someone could test it would be preferable. > Thanks, Uwe. -- With best regards!

1 0

Re: [LinuxBIOS] Tyan s2881+opteron +ubuntu+LBv2 => no GUI
by Baski 07 Oct '07

07 Oct '07

4. Re: Tyan s2881+opteron +ubuntu+LBv2 => no GUI (Ward Vandewege) On Sat, Oct 06, 2007 at 01:37:59PM -0700, Baski wrote: > I got the latest version of LB2 as of today and followed the s2881 Built > tutorial. > I extracted the VGA bios from latest AMI bios (v208) using cbrom under > Win-XP. > > Ubuntu boots into Text mode, but fails trying to launch the GUI. Can you describe more in detail what happens? Error messages? What happens when you try running startx from the command line? What's in the X log file? Thanks, Ward. Hi, 1st thing. My system always executes Fallback image "LinuxBIOS-2.0.0_s2881_Fallback Sat Oct 6 13:41:10 CDT 2007 booting..." Ubuntu seems to start gnome. I'm not getting the gnome desktop. I see that gnome-session is already running, but can't run any graphic apps. It says "NO DEVICE" . I tried to run 'startx' from the shell and again I got "No Devices detected". Here is the log of X failure. === X Window System Version 7.2.0 Release Date: 22 January 2007 X Protocol Version 11, Revision 0, Release 7.2 Build Operating System: Linux Ubuntu Current Operating System: Linux Bharathi 2.6.20-16-generic #2 SMP Sun Sep 23 19:50:39 UTC 2007 i686 Build Date: 04 April 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 6 22:24:49 2007 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "DELL M782" (**) | |-->Device "ATI Technologies Inc Rage XL" (**) |-->Input Device "Generic Keyboard" (**) |-->Input Device "Configured Mouse" (**) |-->Input Device "stylus" (**) |-->Input Device "cursor" (**) |-->Input Device "eraser" (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. .... X.Org Font Renderer : 0.5 (--) using VT number 7 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:24:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: (II) Loading /usr/lib/xorg/modules//libi2c.so (II) Module i2c: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.2.0 ABI class: X.Org Video Driver, version 1.1 (II) LoadModule: "ddc" (II) Loading /usr/lib/xorg/modules//libddc.so (II) Module ddc: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.1 (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.2.0, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.1 (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.1.0 ABI class: X.Org Video Driver, version 1.1 (II) LoadModule: "ati" (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so (II) Module ati: vendor="X.Org Foundation" compiled for 7.2.0, module version = 6.6.3 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 1.1 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.7 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.7 (II) LoadModule: "wacom" (II) Loading /usr/lib/xorg/modules/input//wacom_drv.so (II) Module wacom: vendor="X.Org Foundation" compiled for 4.3.99.902, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.7 (II) R128: Driver for ATI Rage 128 chipsets: (II) Primary Device is: PCI 02:06:0 (II) ATI: Candidate "Device" section "ATI Technologies Inc Rage XL". (II) ATI: Shared PCI/AGP Mach64 in slot 2:6:0 detected. (EE) No devices detected. Fatal server error: no screens found ===== --------------------------------- Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.

2 1

[LinuxBIOS] Adding support for At29C010A
by Peter Lemenkov 07 Oct '07

07 Oct '07

Hello All! After a quick look through the specs for At29C020 and At29C040A I realized that all these chips looks identical. The only difference is page size - 128 bytes at At29C010A and 256 bytes at 020 and 040 models. So am I right then suggests that for enabling At20C010A chip I need only add few lines - {"At29C010A", ATMEL_ID, AT_29C010A, 128, 128, probe_jedec, erase_chip_jedec, write_jedec}, into flashchips.h and only one #define into flash.c? I don't exactly understand how to find device ID - looks like I need a small advice :) -- With best regards!

2 2

[LinuxBIOS] superiotool - dump support for LPC47B27X
by Robinson Tryon 07 Oct '07

07 Oct '07

Signed-off-by: Robinson P.Tryon <bishop.robinson(a)gmail.com>

2 1

[LinuxBIOS] System requirements for LinuxBIOS
by Peter Lemenkov 07 Oct '07

07 Oct '07

Hello All! I can't find minimal system requirements for running LinuxBIOS. Especially I interested in minimal size of flashrom because I've got one mainboard with AT29C010A - 1 Megabit 128K x 8 5-volt Only CMOS Flash Memory. Is it enough for placing LinuxBIOS there? Maybe there are some other limitations? -- With best regards!

2 1

[LinuxBIOS] Problems with Filo booting - HELP
by joe＠smittys.pointclark.net 06 Oct '07

06 Oct '07

Help me please. I have attached my bootlog. Filo gets this error, what does it mean? Thanks - Joe ------------------------------------------------- Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 rom_stream: 0xfffd0000 - 0xfffeffff Found ELF candidate at offset 0 header_offset is 0 Try to load at offset 0x0 malloc Enter, size 32, free_mem_ptr 00018000 malloc 0x00018000 New segment addr 0x100000 size 0x3d260 offset 0xc0 filesize 0x13248 (cleaned up) New segment addr 0x100000 size 0x3d260 offset 0xc0 filesize 0x13248 lb: [0x0000000000004000, 0x000000000001c000) malloc Enter, size 32, free_mem_ptr 00018020 malloc 0x00018020 New segment addr 0x13d260 size 0x48 offset 0x13320 filesize 0x48 (cleaned up) New segment addr 0x13d260 size 0x48 offset 0x13320 filesize 0x48 lb: [0x0000000000004000, 0x000000000001c000) Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x0000000000100000 memsz: 0x000000000003d260 filesz: 0x0000000000013248 [ 0x0000000000100000, 0000000000113248, 0x000000000013d260) <- 00000000000000c0 Clearing Segment: addr: 0x0000000000113248 memsz: 0x000000000002a018 Loading Segment: addr: 0x000000000013d260 memsz: 0x0000000000000048 filesz: 0x0000000000000048 [ 0x000000000013d260, 000000000013d2a8, 0x000000000013d2a8) <- 0000000000013320 Loaded segments verified segments closed down stream Jumping to boot code at 0x10ea14 entry = 0x0010ea14 lb_start = 0x00004000 lb_size = 0x00018000 adjust = 0x07fe4000 buffer = 0x07fd0000 elf_boot_notes = 0x000139a0 adjusted_boot_notes = 0x07ff79a0 Unexpected Exception: -1 @ ffffffff:ffffffff - Halting Code: -1 eflags: ffffffff eax: ffffffff ebx: ffffffff ecx: ffffffff edx: 00018000 edi: ffffffff esi: ffffffff ebp: 0010003c esp: 00100014 --------------------------------------------------------

8 35

[LinuxBIOS] Tyan s2881+opteron +ubuntu+LBv2 => no GUI
by Baski 06 Oct '07

06 Oct '07

I got the latest version of LB2 as of today and followed the s2881 Built tutorial. I extracted the VGA bios from latest AMI bios (v208) using cbrom under Win-XP. Ubuntu boots into Text mode, but fails trying to launch the GUI. I'm pasting linuxbios log, dmesg dump and lpsci here. Thanks in advance. LB log: LinuxBIOS-2.0.0_s2881_Fallback Sat Oct 6 13:41:10 CDT 2007 starting... 01 nodes initialized. core0 started: started ap apicid: 01 SBLink=02 NC node|link=02 ht reset - LinuxBIOS-2.0.0_s2881_Fallback Sat Oct 6 13:41:10 CDT 2007 starting... 01 nodes initialized. core0 started: started ap apicid: 01 SBLink=02 NC node|link=02 Ram1.00 Ram2.00 Ram3 Initializing memory: done Ram4 v_esp=000cfdac testx = 5a5a5a5a Copying data from cache to RAM -- switching to use RAM as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Copying LinuxBIOS to RAM. src=fffe0000 dst=00004000 linxbios_ram.nrv2b length = 0000dd0c linxbios_ram.bin length = 000252d0 Jumping to LinuxBIOS. LinuxBIOS-2.0.0_s2881_Fallback Sat Oct 6 13:41:10 CDT 2007 booting... Enumerating buses... APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled PCI: 00:18.3 siblings=1 CPU: APIC: 00 enabled CPU: APIC: 01 enabled PCI: pci_scan_bus for bus 00 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] enabled PCI: 01:00.0 [1022/7450] enabled PCI: 01:0a.0 [1022/7450] enabled next_unitid: 000c PCI: 01:00.0 [1022/7460] enabled PCI: 01:0c.0 [1022/7460] enabled next_unitid: 0010 unitid: 000c --> 0006 PCI: pci_scan_bus for bus 01 PCI: 01:06.0 [1022/7460] enabled PCI: 01:07.0 [1022/7468] enabled PCI: 01:07.1 [1022/7469] enabled PCI: 01:07.2 [1022/746a] enabled PCI: 01:07.3 [1022/746b] enabled PCI: 01:0a.0 [1022/7450] enabled PCI: 01:0a.1 [1022/7451] enabled PCI: 01:0b.0 [1022/7450] enabled PCI: 01:0b.1 [1022/7451] enabled PCI: pci_scan_bus for bus 02 PCI: 02:00.0 [1022/7464] enabled PCI: 02:00.1 [1022/7464] enabled Disabling static device: PCI: 02:05.0 PCI: 02:06.0 [1002/4752] enabled PCI: pci_scan_bus returning with max=002 PNP: 002e.0 enabled PNP: 002e.1 disabled PNP: 002e.2 enabled PNP: 002e.3 disabled PNP: 002e.5 enabled PNP: 002e.6 disabled PNP: 002e.7 disabled PNP: 002e.8 disabled PNP: 002e.9 disabled PNP: 002e.a disabled PNP: 002e.b enabled smbus: PCI: 01:07.3[0]->I2C: 01:50 enabled smbus: PCI: 01:07.3[0]->I2C: 01:51 enabled smbus: PCI: 01:07.3[0]->I2C: 01:52 enabled smbus: PCI: 01:07.3[0]->I2C: 01:53 enabled smbus: PCI: 01:07.3[0]->I2C: 01:54 enabled smbus: PCI: 01:07.3[0]->I2C: 01:55 enabled smbus: PCI: 01:07.3[0]->I2C: 01:56 enabled smbus: PCI: 01:07.3[0]->I2C: 01:57 enabled smbus: PCI: 01:07.3[0]->I2C: 01:2d enabled smbus: PCI: 01:07.3[0]->I2C: 01:2a enabled smbus: PCI: 01:07.3[0]->I2C: 01:49 enabled smbus: PCI: 01:07.3[0]->I2C: 01:4a enabled PCI: pci_scan_bus for bus 03 PCI: 03:09.0 [14e4/1648] enabled PCI: 03:09.1 [14e4/1648] enabled Disabling static device: PCI: 03:0a.0 Disabling static device: PCI: 03:0a.1 PCI: pci_scan_bus returning with max=003 PCI: 03: 100MHz PCI-X PCI: pci_scan_bus for bus 04 PCI: pci_scan_bus returning with max=004 PCI: 04: 133MHz PCI-X PCI: pci_scan_bus returning with max=004 PCI: pci_scan_bus returning with max=004 scan_root_bus ok done Allocating resources... Reading resources... PCI: 01:06.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 02 prefmem PCI: 01:0a.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io PCI: 01:0a.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem Done reading resources. Allocating VGA resource PCI: 02:06.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 01:06.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Setting resources... VGA: PCI: 00:18.0 (aka node 0) link 2 has VGA device PCI: 00:18.0 1ba <- [0x00fd300000 - 0x00fd2fffff] prefmem <node 0 link 2> PCI: 00:18.0 1c2 <- [0x0000001000 - 0x0000002fff] io <node 0 link 2> PCI: 00:18.0 1b2 <- [0x00fc000000 - 0x00fd2fffff] mem <node 0 link 2> PCI: 01:06.0 1c <- [0x0000001000 - 0x0000001fff] bus 02 io PCI: 01:06.0 20 <- [0x00fc000000 - 0x00fd0fffff] bus 02 mem PCI: 02:00.0 10 <- [0x00fd000000 - 0x00fd000fff] mem PCI: 02:00.1 10 <- [0x00fd001000 - 0x00fd001fff] mem PCI: 02:06.0 10 <- [0x00fc000000 - 0x00fcffffff] mem PCI: 02:06.0 14 <- [0x0000001000 - 0x00000010ff] io PCI: 02:06.0 18 <- [0x00fd002000 - 0x00fd002fff] mem PCI: 02:06.0 30 <- [0x00fff80000 - 0x00fff9ffff] romem PNP: 002e.0 60 <- [0x00000003f0 - 0x00000003f7] io PNP: 002e.0 70 <- [0x0000000006 - 0x0000000006] irq PNP: 002e.0 74 <- [0x0000000002 - 0x0000000002] drq PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] io PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] irq PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq PNP: 002e.5 72 <- [0x000000000c - 0x000000000c] irq PNP: 002e.b 60 <- [0x0000000290 - 0x0000000297] io PNP: 002e.b 70 <- [0x0000000005 - 0x0000000005] irq PCI: 01:07.1 20 <- [0x0000002420 - 0x000000242f] io PCI: 01:07.2 10 <- [0x0000002400 - 0x000000241f] io PCI: 01:07.3 58 <- [0x0000002000 - 0x00000020ff] io PCI: 01:0a.0 20 <- [0x00fd100000 - 0x00fd1fffff] bus 03 mem PCI: 03:09.0 10 <- [0x00fd100000 - 0x00fd10ffff] mem64 PCI: 03:09.0 18 <- [0x00fd110000 - 0x00fd11ffff] mem64 PCI: 03:09.1 10 <- [0x00fd120000 - 0x00fd12ffff] mem64 PCI: 03:09.1 18 <- [0x00fd130000 - 0x00fd13ffff] mem64 PCI: 01:0a.1 10 <- [0x00fd200000 - 0x00fd200fff] mem64 PCI: 01:0b.1 10 <- [0x00fd201000 - 0x00fd201fff] mem64 PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] mem <gart> Done setting resources. Done allocating resources. Enabling resources... PCI: 00:18.0 cmd <- 00 PCI: 01:06.0 bridge ctrl <- 000b PCI: 01:06.0 cmd <- 07 PCI: 02:00.0 subsystem <- 10f1/2881 PCI: 02:00.0 cmd <- 02 PCI: 02:00.1 subsystem <- 10f1/2881 PCI: 02:00.1 cmd <- 02 PCI: 02:06.0 subsystem <- 10f1/2881 PCI: 02:06.0 cmd <- 83 PCI: 01:07.0 subsystem <- 10f1/2881 PCI: 01:07.0 cmd <- 0f w83627hf hwm smbus enabled PCI: 01:07.1 subsystem <- 10f1/2881 PCI: 01:07.1 cmd <- 01 PCI: 01:07.2 subsystem <- 10f1/2881 PCI: 01:07.2 cmd <- 01 PCI: 01:07.3 subsystem <- 10f1/2881 PCI: 01:07.3 cmd <- 01 PCI: 01:0a.0 bridge ctrl <- 0003 PCI: 01:0a.0 cmd <- 06 PCI: 03:09.0 subsystem <- 10f1/2881 PCI: 03:09.0 cmd <- 02 PCI: 03:09.1 subsystem <- 10f1/2881 PCI: 03:09.1 cmd <- 02 PCI: 01:0a.1 subsystem <- 10f1/2881 PCI: 01:0a.1 cmd <- 06 PCI: 01:0b.1 subsystem <- 10f1/2881 PCI: 01:0b.1 cmd <- 06 PCI: 00:18.1 subsystem <- 10f1/2881 PCI: 00:18.1 cmd <- 00 PCI: 00:18.2 subsystem <- 10f1/2881 PCI: 00:18.2 cmd <- 00 PCI: 00:18.3 cmd <- 00 done. Initializing devices... Root Device init APIC_CLUSTER: 0 init Initializing CPU #0 CPU: vendor AMD device 20f12 CPU: family 0f, model 21, stepping 02 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 1024MB, type WB DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 microcode: patch id that want to apply= 0x0000004d microcode: updated to patch id = 0x0000004d success CPU model Dual Core AMD Opteron(tm) Processor 275 Setting up local apic... apic_id: 0x00 done. Clearing memory 2048K - 1048576K: --------------- done CPU #0 Initialized Initializing CPU #1 Waiting for 1 CPUS to stop CPU: vendor AMD device 20f12 CPU: family 0f, model 21, stepping 02 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 1024MB, type WB DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 microcode: patch id that want to apply= 0x0000004d microcode: updated to patch id = 0x0000004d success CPU model Dual Core AMD Opteron(tm) Processor 275 Setting up local apic... apic_id: 0x01 done. CPU #1 Initialized All AP CPUs stopped PCI: 00:18.0 init PCI: 01:0a.0 init PCI: 03:09.0 init PCI: 03:09.1 init PCI: 01:06.0 init PCI: 02:06.0 init rom address for PCI: 02:06.0 = fff80000 copying VGA ROM Image from 0xfff80000 to 0xc0000, 0x9000 bytes entering emulator halt_sys: file /home/baski/LinuxBIOSv2/src/devices/emulator/x86emu/ops.c, line 4 387 PCI: 01:07.0 init amd8111: ioapic bsp_apicid = 00 RTC Init RTC: Checksum invalid zeroing cmos Invalid CMOS LB checksum enabling HPET @0xfed00000 PNP: 002e.0 init PNP: 002e.2 init PNP: 002e.5 init PNP: 002e.b init PCI: 01:07.1 init IDE1 IDE0 PCI: 01:07.3 init set power on after power fail smbus: PCI: 01:07.3[0]->I2C: 01:2d init ADM1027: monitoring enabled PCI: 00:18.1 init PCI: 00:18.2 init PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PNP: 0000.0 init SMBus controller found ADT7463 found ADT7463 properly initializedDevices initialized Writing IRQ routing tables to 0xf0000...done. Wrote the mp table end at: 00000020 - 000001cc Moving GDT to 0x500...ok Adjust low_table_end from 0x00000530 to 0x00001000 Adjust rom_table_end from 0x000f0400 to 0x00100000 Wrote linuxbios table at: 00000530 - 00000dcc checksum ad64 Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 rom_stream: 0xfffc0000 - 0xfffdffff Found ELF candidate at offset 0 header_offset is 0 Try to load at offset 0x0 New segment addr 0x100000 size 0x3d6c0 offset 0xc0 filesize 0x136c8 (cleaned up) New segment addr 0x100000 size 0x3d6c0 offset 0xc0 filesize 0x136c8 New segment addr 0x13d6c0 size 0x48 offset 0x137a0 filesize 0x48 (cleaned up) New segment addr 0x13d6c0 size 0x48 offset 0x137a0 filesize 0x48 Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x0000000000100000 memsz: 0x000000000003d6c0 filesz: 0x00 000000000136c8 Clearing Segment: addr: 0x00000000001136c8 memsz: 0x0000000000029ff8 Loading Segment: addr: 0x000000000013d6c0 memsz: 0x0000000000000048 filesz: 0x00 00000000000048 Jumping to boot code at 0x10e81c FILO version 0.5 (root@Bharathi) Sat Oct 6 04:42:05 CDT 2007 collect_linuxbios_info: Searching for LinuxBIOS tables... find_lb_table: Found candidate at: 00000530 find_lb_table: header checksum o.k. find_lb_table: table checksum o.k. find_lb_table: record count o.k. collect_linuxbios_info: Found LinuxBIOS table at: 00000530 convert_memmap: 0x00000000000000 0x00000000001000 16 convert_memmap: 0x00000000001000 0x0000000009f000 1 convert_memmap: 0x000000000c0000 0x00000000030000 1 convert_memmap: 0x000000000f0000 0x00000000010000 16 convert_memmap: 0x00000000100000 0x0000003ff00000 1 Press <Enter> for default menu.lst (hda1:/boot/grub/menu.lst), or <Esc> for prom menu: hda1:/boot/grub/menu.lst hda: LBA 20GB: ST320413A Mounted ext2fs Found Linux version 2.6.20-16-generic (root@terranova) #2 SMP Sun Sep 23 19:50:3 9 UTC 2007 (protocol 0x205) (loadflags 0x1) bzImage. init_linux_params: Setting up paramters at 0x90000 set_memory_size: 0000000000001000 - 00000000000a0000 set_memory_size: 00000000000c0000 - 00000000000f0000 set_memory_size: 0000000000100000 - 0000000040000000 set_memory_size: ramtop=0x40000000 set_memory_size: ext_mem_k=64512, alt_mem_k=1047552 parse_command_line: original command line: "root=UUID=5b3a4606-2585-402e-87be-4b 314cc7edd0 ro console=tty0 console=ttyS0,115200 quiet splash initrd=/boot/initrd .img-2.6.20-16-generic" parse_command_line: kernel command line at 0x91000 parse_command_line: initrd=/boot/initrd.img-2.6.20-16-generic parse_command_line: kernel command line (96 bytes): "root=UUID=5b3a4606-2585-402 e-87be-4b314cc7edd0 ro console=tty0 console=ttyS0,115200 quiet splash" load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1a8bac Loading kernel... ok load_initrd: start=0x1f961000 end=0x1ffffead Loading initrd... ok start_linux: eip=0x100000 Jumping to entry point... [ 0.000000] ACPI: Unable to locate RSDP [ 0.173372] PCI: Unable to handle 64-bit address space for bridge 0000:01:0a. 0 Loading, please wait... usplash: libusplash.c:260: switch_console: Assertion `(saved_vt >= 0) && (saved_ vt < 10)' failed. kinit: name_to_dev_t(/dev/disk/by-uuid/de4789bd-6c3e-4035-8587-c3d7d86e9c49) = h da5(3,5) kinit: trying to resume from /dev/disk/by-uuid/de4789bd-6c3e-4035-8587-c3d7d86e9 c49 kinit: No resume image, doing normal boot... * Reading files needed to boot... [ OK ] * Setting preliminary keymap... [ OK ] * Preparing restricted drivers... [ OK ] * Starting basic networking... [ OK ] * Starting kernel event manager... [ OK ] * Loading hardware drivers... [ 24.152000] shpchp: shpc_init: cannot reserve MMIO region [ 24.156000] shpchp: shpc_init: cannot reserve MMIO region [ 24.160000] shpchp: shpc_init: cannot reserve MMIO region [ OK ] * Loading kernel modules... * Loading manual drivers... [ OK ] * Activating swap... [ OK ] * Checking root file system... fsck 1.40-WIP (14-Nov-2006) /dev/hda1: clean, 139655/2338336 files, 735473/4672899 blocks [ OK ] * Checking file systems... fsck 1.40-WIP (14-Nov-2006) [ OK ] * Mounting local filesystems... [ OK ] * Activating swapfile swap... [ OK ] * Configuring network interfaces... [ OK ] * Starting system log daemon... [ OK ] * Doing Wacom setup... cat: */id: No such file or directory [ OK ] * Starting kernel log... [ OK ] * Starting system message bus dbus [ OK ] * Starting Hardware abstraction layer hald [ OK ] * Starting DHCP D-Bus daemon dhcdbd [ OK ] * Starting network connection manager NetworkManager [ OK ] * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ OK ] * Starting network events dispatcher NetworkManagerDispatcher [ OK ] * Starting System Tools Backends system-tools-backends [ OK ] * Starting GNOME Display Manager... [ OK ] * Starting Common Unix Printing System: cupsd [ OK ] * Starting HP Linux Printing and Imaging System [ OK ] * Starting powernowd... /etc/rc2.d/S20powernowd: 156: cannot create /sys/devices/system/cpu/cpu0//cpufre q/scaling_governor: Directory nonexistent * CPU frequency scaling not supported [ OK ] * Starting Bluetooth services [ OK ] * Starting anac(h)ronistic cron anacron [ OK ] * Starting deferred execution scheduler atd [ OK ] * Starting periodic command scheduler crond [ OK ] * Enabling additional executable binary formats binfmt-support [ OK ] * Checking battery state... [ OK ] * Running local boot scripts (/etc/rc.local) [ OK ] dmseg: ====== [ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Sep 23 19:50:39 UTC 2007 (Ubuntu 2.6.20-16.32-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000001000 size: 000000000009f000 end: 00000000000a0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 00000000000c0000 size: 0000000000030000 end: 00000000000f0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() lies in range... [ 0.000000] copy_e820_map() end <= 0x100000ULL [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003ff00000 end: 0000000040000000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] 128MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 00000010 [ 0.000000] Entering add_active_range(0, 0, 262144) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262144 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262144 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 256 pages used for memmap [ 0.000000] HighMem zone: 32512 pages, LIFO batch:7 [ 0.000000] DMI not present or invalid. [ 0.000000] ACPI: Unable to locate RSDP [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] OEM ID: TYAN Product ID: S2881 APIC at: 0xFEE00000 [ 0.000000] Processor #0 15:1 APIC version 16 [ 0.000000] Processor #1 15:1 APIC version 16 [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. [ 0.000000] I/O APIC #3 Version 17 at 0xFD200000. [ 0.000000] I/O APIC #4 Version 17 at 0xFD201000. [ 0.000000] Enabling APIC mode: Flat. Using 3 I/O APICs [ 0.000000] Processors: 2 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000) [ 0.000000] Detected 2191.253 MHz processor. [ 76.672598] Built 1 zonelists. Total pages: 260096 [ 76.672601] Kernel command line: root=UUID=5b3a4606-2585-402e-87be-4b314cc7edd0 ro console=tty0 console=ttyS0,115200 quiet splash [ 76.672724] mapped APIC to ffffd000 (fee00000) [ 76.672726] mapped IOAPIC to ffffc000 (fec00000) [ 76.672728] mapped IOAPIC to ffffb000 (fd200000) [ 76.672730] mapped IOAPIC to ffffa000 (fd201000) [ 76.672732] Enabling fast FPU save and restore... done. [ 76.672734] Enabling unmasked SIMD FPU exception support... done. [ 76.672742] Initializing CPU#0 [ 76.672806] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 76.675390] Console: colour VGA+ 80x25 [ 76.679884] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 76.680249] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 76.697022] Memory: 1028524k/1048576k available (1993k kernel code, 19496k reserved, 900k data, 328k init, 131072k highmem) [ 76.697031] virtual kernel memory layout: [ 76.697032] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 76.697033] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 76.697034] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 76.697035] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 76.697036] .init : 0xc03d9000 - 0xc042b000 ( 328 kB) [ 76.697037] .data : 0xc02f2429 - 0xc03d36d4 ( 900 kB) [ 76.697038] .text : 0xc0100000 - 0xc02f2429 (1993 kB) [ 76.697041] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 76.776739] Calibrating delay using timer specific routine.. 4386.55 BogoMIPS (lpj=8773117) [ 76.776774] Security Framework v1.0.0 initialized [ 76.776779] SELinux: Disabled at boot. [ 76.776792] Mount-cache hash table entries: 512 [ 76.776908] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 [ 76.776916] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 76.776918] CPU: L2 Cache: 1024K (64 bytes/line) [ 76.776920] CPU 0(2) -> Core 0 [ 76.776922] CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003 [ 76.776932] Compat vDSO mapped to ffffe000. [ 76.776935] Remapping vsyscall page to ffffe000 [ 76.776944] Checking 'hlt' instruction... OK. [ 76.792851] SMP alternatives: switching to UP code [ 76.793231] Early unpacking initramfs... done [ 77.047725] CPU0: AMD Dual Core AMD Opteron(tm) Processor 275 stepping 02 [ 77.047744] SMP alternatives: switching to SMP code [ 77.047840] Booting processor 1/1 eip 3000 [ 77.058051] Initializing CPU#1 [ 77.136478] Calibrating delay using timer specific routine.. 4382.41 BogoMIPS (lpj=8764835) [ 77.136484] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 [ 77.136490] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 77.136492] CPU: L2 Cache: 1024K (64 bytes/line) [ 77.136494] CPU 1(2) -> Core 1 [ 77.136495] CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003 [ 77.136686] CPU1: AMD Dual Core AMD Opteron(tm) Processor 275 stepping 02 [ 77.136700] Total of 2 processors activated (8768.97 BogoMIPS). [ 77.136923] ENABLING IO-APIC IRQs [ 77.137192] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 [ 77.284380] checking TSC synchronization across 2 CPUs: passed. [ 0.003997] Brought up 2 CPUs [ 0.171190] migration_cost=524 [ 0.171415] Booting paravirtualized kernel on bare hardware [ 0.171502] Time: 18:46:21 Date: 09/06/107 [ 0.171528] NET: Registered protocol family 16 [ 0.171597] EISA bus registered [ 0.172005] PCI: Using configuration type 1 [ 0.172007] Setting up standard PCI resources [ 0.172475] ACPI: Interpreter disabled. [ 0.172477] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.172483] pnp: PnP ACPI: disabled [ 0.172484] PnPBIOS: Scanning system for PnP BIOS support... [ 0.172493] PnPBIOS: PnP BIOS support was not detected. [ 0.172524] PCI: Probing PCI hardware [ 0.172526] PCI: Probing PCI hardware (bus 00) [ 0.173220] Boot video device is 0000:02:06.0 [ 0.173372] PCI: Unable to handle 64-bit address space for bridge 0000:01:0a.0 [ 0.181144] PCI: Discovered primary peer bus 01 [IRQ] [ 0.181149] PCI: Using IRQ router default [1022/7468] at 0000:01:07.0 [ 0.181159] PCI->APIC IRQ transform: 0000:01:07.2[D] -> IRQ 19 [ 0.181166] PCI->APIC IRQ transform: 0000:02:00.0[D] -> IRQ 19 [ 0.181169] PCI->APIC IRQ transform: 0000:02:00.1[D] -> IRQ 19 [ 0.181172] PCI->APIC IRQ transform: 0000:02:06.0[A] -> IRQ 18 [ 0.181175] PCI->APIC IRQ transform: 0000:03:09.0[A] -> IRQ 24 [ 0.181178] PCI->APIC IRQ transform: 0000:03:09.1[B] -> IRQ 25 [ 0.181224] NET: Registered protocol family 8 [ 0.181225] NET: Registered protocol family 20 [ 0.181445] PCI: Bridge: 0000:01:06.0 [ 0.181448] IO window: 1000-1fff [ 0.181452] MEM window: fc000000-fd0fffff [ 0.181456] PREFETCH window: 50000000-500fffff [ 0.181461] PCI: Bridge: 0000:01:0a.0 [ 0.181462] IO window: disabled. [ 0.181465] MEM window: fd100000-fd1fffff [ 0.181468] PREFETCH window: 50100000-501fffff [ 0.181470] PCI: Bridge: 0000:01:0b.0 [ 0.181472] IO window: disabled. [ 0.181474] MEM window: disabled. [ 0.181476] PREFETCH window: disabled. [ 0.181522] NET: Registered protocol family 2 [ 0.215878] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.215998] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.216815] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.217213] TCP: Hash tables configured (established 131072 bind 65536) [ 0.217215] TCP reno registered [ 0.231932] checking if image is initramfs... it is [ 0.734631] Freeing initrd memory: 6779k freed [ 1.244000] audit: initializing netlink socket (disabled) [ 1.244000] audit(1191696382.428:1): initialized [ 1.244000] highmem bounce pool size: 64 pages [ 1.244000] VFS: Disk quotas dquot_6.5.1 [ 1.244000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.244000] io scheduler noop registered [ 1.244000] io scheduler anticipatory registered [ 1.244000] io scheduler deadline registered [ 1.244000] io scheduler cfq registered (default) [ 1.244000] PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:01:0a.0 subordinate bus. [ 1.244000] PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:01:0b.0 subordinate bus. [ 1.248000] isapnp: Scanning for PnP cards... [ 1.600000] isapnp: No Plug & Play device found [ 1.620000] Real Time Clock Driver v1.12ac [ 1.620000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.620000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.620000] mice: PS/2 mouse device common for all mice [ 1.620000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.620000] input: Macintosh mouse button emulation as /class/input/input0 [ 1.620000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1.620000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.620000] PNP: No PS/2 controller found. Probing ports directly. [ 1.624000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.624000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.624000] EISA: Probing bus 0 at eisa.0 [ 1.624000] Cannot allocate resource for EISA slot 1 [ 1.624000] Cannot allocate resource for EISA slot 2 [ 1.624000] EISA: Detected 0 cards. [ 1.624000] TCP cubic registered [ 1.624000] NET: Registered protocol family 1 [ 1.624000] Starting balanced_irq [ 1.624000] Using IPI No-Shortcut mode [ 1.624000] Magic number: 11:619:796 [ 1.624000] hash matches device ptyr4 [ 1.624000] Freeing unused kernel memory: 328k freed [ 1.640000] input: AT Translated Set 2 keyboard as /class/input/input1 [ 2.836000] Capability LSM initialized [ 2.896000] thermal: Unknown symbol acpi_processor_set_thermal_limit [ 3.236000] SCSI subsystem initialized [ 3.240000] libata version 2.20 loaded. [ 3.252000] AMD8111: IDE controller at PCI slot 0000:01:07.1 [ 3.252000] AMD8111: chipset revision 3 [ 3.252000] AMD8111: not 100% native mode: will probe irqs later [ 3.252000] AMD8111: 0000:01:07.1 (rev 03) UDMA133 controller [ 3.252000] ide0: BM-DMA at 0x2420-0x2427, BIOS settings: hda:pio, hdb:pio [ 3.252000] ide1: BM-DMA at 0x2428-0x242f, BIOS settings: hdc:pio, hdd:pio [ 3.252000] Probing IDE interface ide0... [ 3.296000] usbcore: registered new interface driver usbfs [ 3.296000] usbcore: registered new interface driver hub [ 3.296000] usbcore: registered new device driver usb [ 3.296000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.548000] hda: ST320413A, ATA DISK drive [ 4.224000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.224000] Probing IDE interface ide1... [ 4.792000] ohci_hcd 0000:02:00.0: OHCI Host Controller [ 4.796000] ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 4.796000] ohci_hcd 0000:02:00.0: irq 19, io mem 0xfd000000 [ 4.856000] usb usb1: configuration #1 chosen from 1 choice [ 4.856000] hub 1-0:1.0: USB hub found [ 4.856000] hub 1-0:1.0: 3 ports detected [ 4.960000] ohci_hcd 0000:02:00.1: OHCI Host Controller [ 4.960000] ohci_hcd 0000:02:00.1: new USB bus registered, assigned bus number 2 [ 4.960000] ohci_hcd 0000:02:00.1: irq 19, io mem 0xfd001000 [ 5.020000] usb usb2: configuration #1 chosen from 1 choice [ 5.020000] hub 2-0:1.0: USB hub found [ 5.020000] hub 2-0:1.0: 3 ports detected [ 5.128000] tg3.c:v3.72.1 (January 8, 2007) [ 5.160000] eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000Base-T Ethernet 00:e0:81:2f:6d:8c [ 5.160000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] [ 5.160000] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] [ 5.192000] eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000Base-T Ethernet 00:e0:81:2f:6d:8d [ 5.192000] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] [ 5.192000] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] [ 5.196000] hda: max request size: 128KiB [ 5.200000] hda: 39102336 sectors (20020 MB) w/512KiB Cache, CHS=38792/16/63, UDMA(100) [ 5.200000] hda: cache flushes not supported [ 5.200000] hda:<6>usb 1-2: new full speed USB device using ohci_hcd and address 2 [ 5.492000] usb 1-2: configuration #1 chosen from 1 choice [ 5.708000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 5.708000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 5.708000] ide: failed opcode was: unknown [ 5.804000] usb 1-3: new low speed USB device using ohci_hcd and address 3 [ 6.020000] usb 1-3: configuration #1 chosen from 1 choice [ 6.024000] usbcore: registered new interface driver libusual [ 6.028000] Initializing USB Mass Storage driver... [ 6.028000] scsi0 : SCSI emulation for USB Mass Storage devices [ 6.028000] usb-storage: device found at 2 [ 6.028000] usb-storage: waiting for device to settle before scanning [ 6.028000] usbcore: registered new interface driver usb-storage [ 6.028000] USB Mass Storage support registered. [ 6.032000] usbcore: registered new interface driver hiddev [ 6.040000] input: HID 1241:1111 as /class/input/input2 [ 6.040000] input: USB HID v1.00 Mouse [HID 1241:1111] on usb-0000:02:00.0-3 [ 6.040000] usbcore: registered new interface driver usbhid [ 6.040000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 6.212000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 6.212000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 6.212000] ide: failed opcode was: unknown [ 6.660000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 6.660000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 6.660000] ide: failed opcode was: unknown [ 7.152000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 7.152000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 7.152000] ide: failed opcode was: unknown [ 7.200000] ide0: reset: success [ 7.220000] hda1 hda2 < hda5 > [ 7.564000] Attempting manual resume [ 7.564000] swsusp: Resume From Partition 3:5 [ 7.564000] PM: Checking swsusp image. [ 7.600000] PM: Resume from disk failed. [ 7.664000] kjournald starting. Commit interval 5 seconds [ 7.664000] EXT3-fs: mounted filesystem with ordered data mode. [ 8.252000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 8.252000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 8.252000] ide: failed opcode was: unknown [ 8.724000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 8.724000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 8.724000] ide: failed opcode was: unknown [ 9.176000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 9.176000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 9.176000] ide: failed opcode was: unknown [ 9.664000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 9.664000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 9.664000] ide: failed opcode was: unknown [ 9.712000] ide0: reset: success [ 11.028000] usb-storage: device scan complete [ 11.060000] scsi 0:0:0:0: Direct-Access NEC USB UF000x 1.50 PQ: 0 ANSI: 0 CCS [ 20.620000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } [ 20.620000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC } [ 20.620000] ide: failed opcode was: unknown [ 23.132000] PM: Writing back config space on device 0000:03:09.1 at offset b (was 164814e4, writing 164414e4) [ 23.132000] PM: Writing back config space on device 0000:03:09.1 at offset 3 (was 804000, writing 804010) [ 23.132000] PM: Writing back config space on device 0000:03:09.1 at offset 2 (was 2000000, writing 2000003) [ 23.132000] PM: Writing back config space on device 0000:03:09.1 at offset 1 (was 2b00000, writing 2b00006) [ 23.252000] PM: Writing back config space on device 0000:03:09.0 at offset b (was 164814e4, writing 164414e4) [ 23.252000] PM: Writing back config space on device 0000:03:09.0 at offset 3 (was 804000, writing 804010) [ 23.252000] PM: Writing back config space on device 0000:03:09.0 at offset 2 (was 2000000, writing 2000003) [ 23.252000] PM: Writing back config space on device 0000:03:09.0 at offset 1 (was 2b00000, writing 2b00006) [ 24.020000] AMD768 RNG detected [ 24.136000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 24.148000] shpchp: Unknown symbol acpi_run_oshp [ 24.148000] shpchp: Unknown symbol pci_hp_change_slot_info [ 24.148000] shpchp: Unknown symbol pci_hp_register [ 24.148000] shpchp: Unknown symbol pci_hp_deregister [ 24.148000] shpchp: Unknown symbol acpi_get_hp_params_from_firmware [ 24.152000] shpchp: Unknown symbol acpi_run_oshp [ 24.152000] shpchp: Unknown symbol pci_hp_change_slot_info [ 24.152000] shpchp: Unknown symbol pci_hp_register [ 24.152000] shpchp: Unknown symbol pci_hp_deregister [ 24.152000] shpchp: Unknown symbol acpi_get_hp_params_from_firmware [ 24.152000] shpchp: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0 [ 24.152000] shpchp: shpc_init: cannot reserve MMIO region [ 24.156000] shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 24.156000] shpchp: shpc_init: cannot reserve MMIO region [ 24.160000] shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 24.160000] shpchp: shpc_init: cannot reserve MMIO region [ 24.164000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 24.444000] NET: Registered protocol family 17 [ 24.908000] sd 0:0:0:0: Attached scsi removable disk sda [ 24.920000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.056000] fuse init (API version 7.8) [ 25.116000] lp: driver loaded but no devices found [ 25.144000] Adding 859436k swap on /dev/disk/by-uuid/de4789bd-6c3e-4035-8587-c3d7d86e9c49. Priority:-1 extents:1 across:859436k [ 25.280000] EXT3 FS on hda1, internal journal [ 29.492000] powernow_k8: Unknown symbol acpi_processor_notify_smm [ 29.492000] powernow_k8: Unknown symbol acpi_processor_unregister_performance [ 29.492000] powernow_k8: Unknown symbol acpi_processor_register_performance [ 29.536000] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm [ 29.536000] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance [ 29.536000] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance [ 29.536000] acpi_cpufreq: Unknown symbol acpi_processor_register_performance [ 32.792000] ppdev: user-space parallel port driver [ 33.580000] apm: BIOS not found. [ 33.736000] Bluetooth: Core ver 2.11 [ 33.736000] NET: Registered protocol family 31 [ 33.736000] Bluetooth: HCI device and connection manager initialized [ 33.736000] Bluetooth: HCI socket layer initialized [ 33.772000] Bluetooth: L2CAP ver 2.8 [ 33.772000] Bluetooth: L2CAP socket layer initialized [ 33.828000] Bluetooth: RFCOMM socket layer initialized [ 33.828000] Bluetooth: RFCOMM TTY layer initialized [ 33.828000] Bluetooth: RFCOMM ver 1.8 [ 66.780000] NET: Registered protocol family 10 [ 66.780000] lo: Disabled Privacy Extensions [ 66.780000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 66.780000] ADDRCONF(NETDEV_UP): eth1: link is not ready lspci ==== 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) 01:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) 01:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) 01:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02) 01:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05) 01:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 01:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 01:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 01:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 02:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 02:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 02:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 03:09.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03) 03:09.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03) --------------------------------- Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out.

2 1

← Newer
1
...
37
38
39
40
41
42
43
...
49
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot October 2007