coreboot October 2007

coreboot@coreboot.org

84 participants
481 discussions

[LinuxBIOS] r2835 - trunk/util/superiotool
by svn＠openbios.org 07 Oct '07

07 Oct '07

Author: uwe Date: 2007-10-07 22:01:23 +0200 (Sun, 07 Oct 2007) New Revision: 2835 Modified: trunk/util/superiotool/ali.c trunk/util/superiotool/fintek.c trunk/util/superiotool/ite.c trunk/util/superiotool/nsc.c trunk/util/superiotool/smsc.c trunk/util/superiotool/superiotool.c trunk/util/superiotool/superiotool.h trunk/util/superiotool/winbond.c Log: Print a short message if no Super I/O chip could be detected (trivial). Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/util/superiotool/ali.c =================================================================== --- trunk/util/superiotool/ali.c 2007-10-07 19:10:24 UTC (rev 2834) +++ trunk/util/superiotool/ali.c 2007-10-07 20:01:23 UTC (rev 2835) @@ -89,6 +89,7 @@ printf("Found ALi %s (id=0x%04x, rev=0x%02x) at 0x%x\n", get_superio_name(reg_table, id), id, rev, port); + chip_found = 1; dump_superio("ALi", reg_table, port, id); dump_superio_readable(port); /* TODO */ Modified: trunk/util/superiotool/fintek.c =================================================================== --- trunk/util/superiotool/fintek.c 2007-10-07 19:10:24 UTC (rev 2834) +++ trunk/util/superiotool/fintek.c 2007-10-07 20:01:23 UTC (rev 2835) @@ -155,6 +155,7 @@ printf("Found Fintek %s (vid=0x%04x, id=0x%04x) at 0x%x\n", get_superio_name(reg_table, did), vid, did, port); + chip_found = 1; dump_superio("Fintek", reg_table, port, did); dump_readable_fintek(port, did); Modified: trunk/util/superiotool/ite.c =================================================================== --- trunk/util/superiotool/ite.c 2007-10-07 19:10:24 UTC (rev 2834) +++ trunk/util/superiotool/ite.c 2007-10-07 20:01:23 UTC (rev 2835) @@ -361,6 +361,7 @@ printf("Found ITE %s (id=0x%04x, rev=0x%01x) at 0x%x\n", get_superio_name(reg_table, id), id, chipver, port); + chip_found = 1; dump_superio("ITE", reg_table, port, id); dump_superio_readable(port); /* TODO */ Modified: trunk/util/superiotool/nsc.c =================================================================== --- trunk/util/superiotool/nsc.c 2007-10-07 19:10:24 UTC (rev 2834) +++ trunk/util/superiotool/nsc.c 2007-10-07 20:01:23 UTC (rev 2835) @@ -98,6 +98,7 @@ printf("Found NSC %s (sid=0x%02x, srid=0x%02x) at 0x%x\n", get_superio_name(reg_table, id), id, rev, port); + chip_found = 1; dump_superio("NSC", reg_table, port, id); if (id == 0xf1) Modified: trunk/util/superiotool/smsc.c =================================================================== --- trunk/util/superiotool/smsc.c 2007-10-07 19:10:24 UTC (rev 2834) +++ trunk/util/superiotool/smsc.c 2007-10-07 20:01:23 UTC (rev 2835) @@ -298,6 +298,7 @@ printf("Found %s %s (id=0x%02x, rev=0x%02x) at 0x%x\n", (id == 0x77 ? "ASUS" : "SMSC"), get_superio_name(reg_table, id), id, rev, port); + chip_found = 1; dump_superio((id == 0x77 ? "ASUS" : "SMSC"), reg_table, port, id); dump_superio_readable(port); /* TODO */ Modified: trunk/util/superiotool/superiotool.c =================================================================== --- trunk/util/superiotool/superiotool.c 2007-10-07 19:10:24 UTC (rev 2834) +++ trunk/util/superiotool/superiotool.c 2007-10-07 20:01:23 UTC (rev 2835) @@ -25,6 +25,9 @@ /* Command line options. */ int dump = 0, dump_readable = 0, verbose = 0; +/* Global flag which indicates whether a chip was detected at all. */ +int chip_found = 0; + uint8_t regval(uint16_t port, uint8_t reg) { outb(reg, port); @@ -229,5 +232,8 @@ superio_ports_table[i].ports[j]); } + if (!chip_found) + printf("No Super I/O found\n"); + return 0; } Modified: trunk/util/superiotool/superiotool.h =================================================================== --- trunk/util/superiotool/superiotool.h 2007-10-07 19:10:24 UTC (rev 2834) +++ trunk/util/superiotool/superiotool.h 2007-10-07 20:01:23 UTC (rev 2835) @@ -59,6 +59,8 @@ /* Command line parameters. */ extern int dump, dump_readable, verbose; +extern int chip_found; + struct superio_registers { int32_t superio_id; /* Signed, as we need EOT. */ const char name[MAXNAMELEN]; /* Super I/O name */ Modified: trunk/util/superiotool/winbond.c =================================================================== --- trunk/util/superiotool/winbond.c 2007-10-07 19:10:24 UTC (rev 2834) +++ trunk/util/superiotool/winbond.c 2007-10-07 20:01:23 UTC (rev 2835) @@ -313,6 +313,7 @@ else printf("Found Winbond %s (id=0x%02x, rev=0x%02x) at 0x%x\n", get_superio_name(reg_table, id), devid, rev, port); + chip_found = 1; /* TODO: Special notes in dump output for the MISC entries. */ dump_superio("Winbond", reg_table, port, id);

1 0

[LinuxBIOS] r2833 build service
by LinuxBIOS information 07 Oct '07

07 Oct '07

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "uwe" checked in revision 2833 to the LinuxBIOS source repository and caused the following changes: Change Log: Add dump support for the Winbond W83627THF/THG. Signed-off-by: David Hendricks <david.hendricks(a)gmail.com> Acked-by: Peter Stuge <peter(a)stuge.se> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2833&device=hdama&vendor=… Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2833&device=e325&vendor=i… Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2833&device=e326&vendor=i… Compilation of iei:juki-511p is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2833&device=juki-511p&ven… Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2833&device=dk8s2&vendor=… Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2833&device=dk8x&vendor=i… Compilation of newisys:khepri is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2833&device=khepri&vendor… If something broke during this checkin please be a pain in uwe's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system

1 0

[LinuxBIOS] r2834 - trunk/util/superiotool
by svn＠openbios.org 07 Oct '07

07 Oct '07

Author: uwe Date: 2007-10-07 21:10:24 +0200 (Sun, 07 Oct 2007) New Revision: 2834 Modified: trunk/util/superiotool/README Log: Add a list of contributors to the README (trivial). Also, a small hint about where to send additional register dumps. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/util/superiotool/README =================================================================== --- trunk/util/superiotool/README 2007-10-07 19:04:26 UTC (rev 2833) +++ trunk/util/superiotool/README 2007-10-07 19:10:24 UTC (rev 2834) @@ -59,7 +59,12 @@ Please see http://linuxbios.org/Superiotool#Supported_devices. +There's also a collection of sample register dumps from various Super I/O +chips on that page. Please send further register dumps (either from a +proprietary BIOS and/or from LinuxBIOS) to the LinuxBIOS mailing list +(http://linuxbios.org/Mailinglist). + Website and Mailing List ------------------------ @@ -79,3 +84,16 @@ It is licensed under the terms of the GNU General Public License (GPL), either version 2 of the License, or (at your option) any later version. + +Contributors +------------ + +Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> +David Hendricks <david.hendricks(a)gmail.com> +Rasmus Wiman <rasmus(a)wiman.org> +Robinson P. Tryon <bishop.robinson(a)gmail.com> +Ronald Minnich <rminnich(a)gmail.com> +Stefan Reinauer <stepan(a)coresystems.de> +Uwe Hermann <uwe(a)hermann-uwe.de> +Ward Vandewege <ward(a)gnu.org> +

1 0

[LinuxBIOS] r2833 - trunk/util/superiotool
by svn＠openbios.org 07 Oct '07

07 Oct '07

Author: uwe Date: 2007-10-07 21:04:26 +0200 (Sun, 07 Oct 2007) New Revision: 2833 Modified: trunk/util/superiotool/winbond.c Log: Add dump support for the Winbond W83627THF/THG. Signed-off-by: David Hendricks <david.hendricks(a)gmail.com> Acked-by: Peter Stuge <peter(a)stuge.se> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/util/superiotool/winbond.c =================================================================== --- trunk/util/superiotool/winbond.c 2007-10-07 15:26:40 UTC (rev 2832) +++ trunk/util/superiotool/winbond.c 2007-10-07 19:04:26 UTC (rev 2833) @@ -97,6 +97,49 @@ {0x708, "W83637HF/HG", { {EOT}}}, {0x828, "W83627THF/THG", { /* We assume rev is bits 3..0 of 0x21. */ + {NOLDN, NULL, + {0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x28,0x29,0x2a, + 0x2b,0x2c,0x2d,0x2e,0x2f,EOT}, + {0x82,NANA,0xff,0x00,MISC,0x00,MISC,0x00,0x00,0x00, + MISC,MISC,MISC,0x00,0x00,EOT}}, + /* Some register defaults depend on the value of PNPCSV. */ + {0x0, "Floppy", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4, + 0xf5,EOT}, + {0x01,0x03,0xf0,0x06,0x02,0x0e,0x00,0xff,0x00, + 0x00,EOT}}, + {0x1, "Parallel port", + {0x30,0x60,0x61,0x70,0x74,0xf0,EOT}, + {0x01,0x03,0x78,0x07,0x04,0x3f,EOT}}, + {0x2, "COM1", + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x01,0x03,0xf8,0x04,0x00,EOT}}, + {0x3, "COM2", + {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT}, + {0x01,0x02,0xf8,0x03,0x00,0x00,EOT}}, + {0x5, "Keyboard", + {0x30,0x60,0x61,0x62,0x63,0x70,0x72,0xf0,EOT}, + {0x01,0x00,0x60,0x00,0x64,0x01,0x0c,0x80,EOT}}, + {0x7, "GPIO 1, GPIO 5, game port, MIDI port", + {0x30,0x60,0x61,0x62,0x63,0x70,0xf0,0xf1,0xf2,0xf3, + 0xf4,0xf5,EOT}, + {0x00,0x02,0x01,0x03,0x30,0x09,0xff,0x00,0x00,0xff, + 0x00,0x00,EOT}}, + {0x8, "GPIO 2", + {0x30,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,EOT}, + {0x00,0xff,0x00,0x00,0x00,RSVD,0x00,0x00,0x00,EOT}}, + {0x9, "GPIO 3, GPIO 4", + {0x30,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,EOT}, + {0x00,0xff,0x00,0x00,0x00,0xff,0x00,0x00,EOT}}, + {0xa, "ACPI", + /* Note: Datasheet says 0xe2 can't be read/written. */ + {0x30,0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7, + 0xf0,0xf1,0xf3,0xf4,0xf6,0xf7,0xf9,0xfe,0xff,EOT}, + {0x00,0x00,0x00,0x00,MISC,MISC,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,RSVD,RSVD,EOT}}, + {0xb, "Hardware monitor", + {0x30,0x60,0x61,0x70,EOT}, + {0x00,0x00,0x00,0x00,EOT}}, {EOT}}}, #if 0 {0x85x, "W83687THF", { /* TODO: sensors-detect: 0x85 */

1 0

[LinuxBIOS] r2832 build service
by LinuxBIOS information 07 Oct '07

07 Oct '07

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "uwe" checked in revision 2832 to the LinuxBIOS source repository and caused the following changes: Change Log: Add a manpage for superiotool (trivial). Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2832&device=hdama&vendor=… Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2832&device=e325&vendor=i… Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2832&device=e326&vendor=i… Compilation of iei:juki-511p is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2832&device=juki-511p&ven… Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2832&device=dk8s2&vendor=… Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2832&device=dk8x&vendor=i… Compilation of newisys:khepri is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2832&device=khepri&vendor… If something broke during this checkin please be a pain in uwe's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system

1 0

[LinuxBIOS] r2831 build service
by LinuxBIOS information 07 Oct '07

07 Oct '07

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "uwe" checked in revision 2831 to the LinuxBIOS source repository and caused the following changes: Change Log: Dump support for the SMSC FDC37B72x. Signed-off-by: Robinson P. Tryon <bishop.robinson(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2831&device=hdama&vendor=… Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2831&device=e325&vendor=i… Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2831&device=e326&vendor=i… Compilation of iei:juki-511p is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2831&device=juki-511p&ven… Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2831&device=dk8s2&vendor=… Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2831&device=dk8x&vendor=i… Compilation of newisys:khepri is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2831&device=khepri&vendor… If something broke during this checkin please be a pain in uwe's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system

1 0

[LinuxBIOS] r2830 build service
by LinuxBIOS information 07 Oct '07

07 Oct '07

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "uwe" checked in revision 2830 to the LinuxBIOS source repository and caused the following changes: Change Log: Dump support for the SMSC FDC37B78x. Signed-off-by: Robinson P. Tryon <bishop.robinson(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2830&device=hdama&vendor=… Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2830&device=e325&vendor=i… Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2830&device=e326&vendor=i… Compilation of iei:juki-511p is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2830&device=juki-511p&ven… Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2830&device=dk8s2&vendor=… Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2830&device=dk8x&vendor=i… Compilation of newisys:khepri is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2830&device=khepri&vendor… If something broke during this checkin please be a pain in uwe's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system

1 0

[LinuxBIOS] r2832 - trunk/util/superiotool
by svn＠openbios.org 07 Oct '07

07 Oct '07

Author: uwe Date: 2007-10-07 17:26:40 +0200 (Sun, 07 Oct 2007) New Revision: 2832 Added: trunk/util/superiotool/superiotool.8 Modified: trunk/util/superiotool/Makefile Log: Add a manpage for superiotool (trivial). Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/util/superiotool/Makefile =================================================================== --- trunk/util/superiotool/Makefile 2007-10-07 15:12:12 UTC (rev 2831) +++ trunk/util/superiotool/Makefile 2007-10-07 15:26:40 UTC (rev 2832) @@ -37,6 +37,8 @@ install: $(PROGRAM) $(INSTALL) $(PROGRAM) $(PREFIX)/bin + mkdir -p $(PREFIX)/share/man/man8 + $(INSTALL) $(PROGRAM).8 $(PREFIX)/share/man/man8 clean: rm -f $(PROGRAM) *.o Added: trunk/util/superiotool/superiotool.8 =================================================================== --- trunk/util/superiotool/superiotool.8 (rev 0) +++ trunk/util/superiotool/superiotool.8 2007-10-07 15:26:40 UTC (rev 2832) @@ -0,0 +1,58 @@ +.TH SUPERIOTOOL 8 "October 7, 2007" +.SH NAME +superiotool \- Super I/O detection tool +.SH SYNOPSIS +.B superiotool \fR[\fB\-dDVvh\fR] +.SH DESCRIPTION +.B superiotool +is a GPL'd user-space utility which can +.PP + * detect which Super I/O chip is soldered onto your mainboard, +.PP + * at which configuration port it's located (usually 0x2e or 0x4e), and +.PP + * dump all register contents of the Super I/O chip, together with the + default values as per datasheet (to make comparing the values easy). +.PP +It is mainly used for LinuxBIOS development purposes (see linuxbios.org +for details on LinuxBIOS), but it may also be useful for other things. +.SH OPTIONS +If no command line option is specified, +.B superiotool +merely tries to detect the Super I/O chip. +You must use either the +.BR "\-d" " or the " "\-D" +option to dump the Super I/O register contents. +.TP +.B "\-d, \-\-dump" +Dump Super I/O registers (if the Super I/O chip is detected and +.B superiotool +supports the +.B "\-\-dump" +option for this chip). +.TP +.B "\-D, \-\-dump-readable" +Dump Super I/O registers in human-readable format (if the Super I/O chip +is detected and +.B superiotool +supports the +.B "\-\-dump-readable" +option for this chip). +.TP +.B "\-V, \-\-verbose" +Enable verbose mode. This option can be used together with the +.BR "\-d" " or " "\-D" " option". +.TP +.B "\-v, \-\-version" +Show version information and exit. +.TP +.B "\-h, \-\-help" +Show a help text and exit. +.SH BUGS +Please report any bugs at http://tracker.linuxbios.org/trac/LinuxBIOS/ +or on the LinuxBIOS mailing list (http://linuxbios.org/Mailinglist). +.SH LICENCE +.B superiotool +is covered by the GNU General Public License (GPL), version 2 or later. +.SH SEE ALSO +.BR sensors-detect (8)

1 0

[LinuxBIOS] r2829 build service
by LinuxBIOS information 07 Oct '07

07 Oct '07

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "uwe" checked in revision 2829 to the LinuxBIOS source repository and caused the following changes: Change Log: Dump support for the SMSC FDC37M81x. Signed-off-by: Robinson P. Tryon <bishop.robinson(a)gmail.com> Acked-by: Peter Stuge <peter(a)stuge.se> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2829&device=hdama&vendor=… Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2829&device=e325&vendor=i… Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2829&device=e326&vendor=i… Compilation of iei:juki-511p is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2829&device=juki-511p&ven… Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2829&device=dk8s2&vendor=… Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2829&device=dk8x&vendor=i… Compilation of newisys:khepri is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2829&device=khepri&vendor… If something broke during this checkin please be a pain in uwe's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system

1 0

[LinuxBIOS] r2831 - trunk/util/superiotool
by svn＠openbios.org 07 Oct '07

07 Oct '07

Author: uwe Date: 2007-10-07 17:12:12 +0200 (Sun, 07 Oct 2007) New Revision: 2831 Modified: trunk/util/superiotool/smsc.c Log: Dump support for the SMSC FDC37B72x. Signed-off-by: Robinson P. Tryon <bishop.robinson(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/util/superiotool/smsc.c =================================================================== --- trunk/util/superiotool/smsc.c 2007-10-07 15:04:17 UTC (rev 2830) +++ trunk/util/superiotool/smsc.c 2007-10-07 15:12:12 UTC (rev 2831) @@ -86,6 +86,42 @@ {0x00,0x00,0x00,NANA,NANA,EOT}}, {EOT}}}, {0x4c, "FDC37B72x", { + {NOLDN, NULL, + {0x03,0x07,0x20,0x21,0x22,0x23,0x24,0x26,0x27,0x28, + 0x2b,0x2c,0x2d,0x2e,0x2f,EOT}, + {0x03,NANA,0x4c,0x00,0x00,0x00,0x04,MISC,MISC,0x00, + NANA,NANA,NANA,NANA,NANA,EOT}}, + {0x0, "Floppy", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,0xf5, + EOT}, + {0x00,0x03,0xf0,0x06,0x02,0x0e,0x00,0xff,0x00,0x00, + EOT}}, + {0x3, "Parallel port", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,EOT}, + {0x00,0x00,0x00,0x00,0x04,0x3c,0x00,EOT}}, + {0x4, "COM1", + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x00,0x00,0x00,0x00,0x00,EOT}}, + {0x5, "COM2", + {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT}, + {NANA,0x00,0x00,0x00,0x00,0x02,0x03,EOT}}, + {0x7, "Keyboard", + {0x30,0x70,0x72,0xf0,EOT}, + {0x00,0x00,0x00,0x00,EOT}}, + {0x8, "Aux I/O", + {0x30,0xb0,0xb1,0xb2,0xb3,0xb8,0xc0,0xc1,0xc2,0xc3, + 0xc4,0xc5,0xc6,0xc8,0xca,0xcb,0xcc,0xd0,0xd1,0xd2, + 0xd3,0xd4,0xd5,0xd6,0xd7,0xe0,0xe1,0xe2,0xe3,0xe4, + 0xe5,0xe6,0xe7,0xef,0xf0,0xf1,0xf2,0xf3,0xf4,0xf6, + 0xf9,0xfa,EOT}, + {0x00,NANA,NANA,NANA,NANA,NANA,0x00,0x01,NANA,NANA, + NANA,0x00,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA, + NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA, + NANA,NANA,NANA,NANA,NANA,0x00,0x00,0x00,MISC,NANA, + NANA,NANA,EOT}}, + {0xa, "ACPI", + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x00,0x00,0x00,NANA,NANA,EOT}}, {EOT}}}, {0x4d, "FDC37M81x", { {NOLDN, NULL,

1 0

← Newer
1
...
36
37
38
39
40
41
42
...
49
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot October 2007