coreboot October 2007

coreboot@coreboot.org

84 participants
481 discussions

[LinuxBIOS] DFI Lanparty NF4 SLi DR ( socket 939 ) - lspci and superiotool output
by George Tsalikis 25 Oct '07

25 Oct '07

root[george]# root[george]# lspci -tvnn -[0000:00]-+-00.0 nVidia Corporation CK804 Memory Controller [10de:005e] +-01.0 nVidia Corporation CK804 ISA Bridge [10de:0050] +-01.1 nVidia Corporation CK804 SMBus [10de:0052] +-02.0 nVidia Corporation CK804 USB Controller [10de:005a] +-02.1 nVidia Corporation CK804 USB Controller [10de:005b] +-06.0 nVidia Corporation CK804 IDE [10de:0053] +-07.0 nVidia Corporation CK804 Serial ATA Controller [10de:0054] +-08.0 nVidia Corporation CK804 Serial ATA Controller [10de:0055] +-09.0-[0000:01]--+-06.0 Philips Semiconductors SAA7146 [1131:7146] | +-07.0 Creative Labs SB Audigy [1102:0004] | +-07.1 Creative Labs SB Audigy Game Port [1102:7003] | +-07.2 Creative Labs SB Audigy FireWire Port [1102:4001] | +-09.0 VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] | \-0a.0 Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] +-0a.0 nVidia Corporation CK804 Ethernet Controller [10de:0057] +-0b.0-[0000:02]-- +-0c.0-[0000:03]-- +-0d.0-[0000:04]-- +-0e.0-[0000:05]----00.0 nVidia Corporation GeForce 6500 [10de:0160] +-18.0 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] +-18.1 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] +-18.2 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] \-18.3 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] root[george]# superiotool -dV superiotool r2841 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x2e... Found ITE IT8712F (id=0x8712, rev=0x7) at 0x2e Register dump: idx 07 20 21 22 23 24 2b val 02 87 12 07 41 00 00 def NA 87 12 08 00 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 val 01 03 f0 06 02 00 00 def 00 03 f0 06 02 00 00 LDN 0x01 (COM1) idx 30 60 61 70 f0 f1 f2 f3 val 01 03 f8 04 00 50 00 7f def 00 03 f8 04 00 50 00 7f LDN 0x02 (COM2) idx 30 60 61 70 f0 f1 f2 f3 val 01 02 f8 03 10 50 00 7f def 00 02 f8 03 00 50 00 7f LDN 0x03 (Parallel port) idx 30 60 61 62 63 70 74 f0 val 00 00 00 00 00 00 04 08 def 00 03 78 07 78 07 03 03 LDN 0x04 (Environment controller) idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 f6 val 01 02 90 00 00 00 08 08 0a 00 08 01 ff def 00 02 90 02 30 09 00 00 00 00 00 NA NA LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 71 f0 val 01 00 60 00 64 01 02 68 def 01 00 60 00 64 01 02 08 LDN 0x06 (Mouse) idx 30 70 71 f0 val 00 00 02 00 def 00 0c 02 00 LDN 0x07 (GPIO) idx 25 26 27 28 29 2a 2c 60 61 62 63 64 65 70 71 72 73 74 b0 b1 b2 b3 b4 b5 b8 b9 ba bb bc bd c0 c1 c2 c3 c4 c8 c9 ca cb cc e0 e1 e2 e3 e4 f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd val c1 cf 00 03 08 00 1f 00 00 02 00 00 00 00 00 00 00 04 c0 c0 00 00 00 00 00 00 00 00 08 08 c0 cf 00 01 00 00 0f 00 01 00 00 00 00 00 00 10 00 00 00 00 2b 20 00 00 01 00 00 28 00 def 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 40 00 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 NA 00 LDN 0x08 (MIDI port) idx 30 60 61 70 f0 val 00 03 00 0a 00 def 00 03 00 0a 00 LDN 0x09 (Game port) idx 30 60 61 val 00 02 01 def 00 02 01 LDN 0x0a (Consumer IR) idx 30 60 61 70 f0 val 00 03 10 0b 06 def 00 03 10 0b 00 Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff root[george]#

1 0

Re: [LinuxBIOS] r2873 - trunk/util/flashrom
by Peter Stuge 25 Oct '07

25 Oct '07

On Thu, Oct 18, 2007 at 01:55:15AM +0200, svn(a)openbios.org wrote: > Author: uwe > Some cosmetic cleanups in the flashrom code and output. Mostly true.. > - "gigabyte", "m61ps3", "GIGABYTE GA-M61P-S3", it87xx_probe_spi_flash}, > + "gigabyte", "m61p", "GIGABYTE GA-M61P-S3", it87xx_probe_spi_flash}, ..but this type of change should really be a separate patch, or at the very least mentioned explicitly in the commit message. It does change the behavior of flashrom completely for one board. //Peter

1 0

[LinuxBIOS] buildrom problems (serengeti cheetah, s2891)
by Myles Watson 25 Oct '07

25 Oct '07

I checked out the latest buildrom and tried to build L-A-B for two targets, Serengeti cheetah and Tyan s2891. It fails to build the kernel because it passes KERNEL_CC=gcc -m32 to make, and make interprets the -m32 as an option to make. I'm assuming that there's something wrong with my environment, but I'm not sure how to fix it. I'm using Fedora Core 4 and gcc 4 Any suggestions? Myles

3 4

[LinuxBIOS] r49 - in buildrom-devel: packages/kernel packages/memtest packages/uclibc scripts
by svn＠openbios.org 25 Oct '07

25 Oct '07

Author: jcrouse Date: 2007-10-25 00:35:08 +0200 (Thu, 25 Oct 2007) New Revision: 49 Modified: buildrom-devel/packages/kernel/kernel.inc buildrom-devel/packages/memtest/memtest.mk buildrom-devel/packages/uclibc/uclibc.mk buildrom-devel/scripts/Build.settings Log: [BUILDROM] Fix building 32 bit on 64 bit hosts Re-adjust my previous patch a little bit, its not smart to be passing the -m32 flag into the kernel, it already knows how to do the right thing (TM). So pull the 32 bit flags from the default CC, AS and LD variable and pass them in individually. Also, add quotes to the variables passed into the kernel, since thats obviously buggy. Signed-off-by: Jordan Crouse <jordan.crouse(a)amd.com> Acked-by: Ward Vandewege <ward(a)gnu.org> Modified: buildrom-devel/packages/kernel/kernel.inc =================================================================== --- buildrom-devel/packages/kernel/kernel.inc 2007-10-24 21:45:06 UTC (rev 48) +++ buildrom-devel/packages/kernel/kernel.inc 2007-10-24 22:35:08 UTC (rev 49) @@ -45,7 +45,7 @@ $(KERNEL_SRC_DIR)/arch/i386/boot/bzImage: $(KERNEL_SRC_DIR)/.config @ echo "Building kernel..." @ $(MAKE) -C $(KERNEL_SRC_DIR) ARCH=i386 \ - KERNEL_CC=$(CC) KERNEL_LD=$(LD) > $(KERNEL_BUILD_LOG) 2>&1 + KERNEL_CC="$(CC)" KERNEL_LD="$(LD)" > $(KERNEL_BUILD_LOG) 2>&1 $(OUTPUT_DIR)/bzImage: $(KERNEL_SRC_DIR)/arch/i386/boot/bzImage @ install -d $(OUTPUT_DIR) Modified: buildrom-devel/packages/memtest/memtest.mk =================================================================== --- buildrom-devel/packages/memtest/memtest.mk 2007-10-24 21:45:06 UTC (rev 48) +++ buildrom-devel/packages/memtest/memtest.mk 2007-10-24 22:35:08 UTC (rev 49) @@ -36,7 +36,7 @@ $(MEMTEST_SRC_DIR)/memtest: $(MEMTEST_CONFIG_TARGET) @ echo "Building memtest..." - @ $(MAKE) -C $(MEMTEST_SRC_DIR) AS="$(AS)" CC="$(CC)" LD="$(LD)" CCFLAGS="$(CFLAGS)" memtest > $(MEMTEST_BUILD_LOG) 2>&1 + @ $(MAKE) -C $(MEMTEST_SRC_DIR) AS="$(AS) $(CROSS_ASFLAGS)" CC="$(CC) $(CROSS_CFLAGS)" LD="$(LD) $(CROSS_LDFLAGS)" CCFLAGS="$(CFLAGS)" memtest > $(MEMTEST_BUILD_LOG) 2>&1 $(MEMTEST_STAMP_DIR) $(MEMTEST_LOG_DIR): @ mkdir -p $@ Modified: buildrom-devel/packages/uclibc/uclibc.mk =================================================================== --- buildrom-devel/packages/uclibc/uclibc.mk 2007-10-24 21:45:06 UTC (rev 48) +++ buildrom-devel/packages/uclibc/uclibc.mk 2007-10-24 22:35:08 UTC (rev 49) @@ -32,7 +32,7 @@ @ echo "Building uclibc..." @ ( unset CFLAGS; unset LDFLAGS; \ $(MAKE) -C $(UCLIBC_SRC_DIR) TARGET_ARCH="$(UCLIBC_ARCH)" \ - CC="$(CC)" LD="$(LD)" \ + CC="$(CC) $(CROSS_CFLAGS)" LD="$(LD) $(CROSS_LDFLAGS)" \ HOSTCC="$(HOST_CC)" KERNEL_SOURCE="$(KERNEL_SRC_DIR)" \ RUNTIME_PREFIX="/" \ SHARED_LIB_LOADER_PATH="/lib" \ Modified: buildrom-devel/scripts/Build.settings =================================================================== --- buildrom-devel/scripts/Build.settings 2007-10-24 21:45:06 UTC (rev 48) +++ buildrom-devel/scripts/Build.settings 2007-10-24 22:35:08 UTC (rev 49) @@ -30,11 +30,7 @@ ifeq ($(BUILD_ARCH),x86_64) ifneq ($(BUILD_ARCH), $(TARGET_ARCH)) -CC += -m32 -AS += --32 -LD += -melf_i386 - -CROSS_ASFLAGS=-m32 +CROSS_ASFLAGS=--32 CROSS_CFLAGS=-m32 CROSS_LDFLAGS=-melf_i386

1 0

[LinuxBIOS] EHCI Debug Port
by joe＠smittys.pointclark.net 25 Oct '07

25 Oct '07

Hello, I just wanted to let everyone know I found his cool article on EHCI USB Debugging. It goes a little further into detail about cables that can be used for this. Possible to add it to the Wiki?? http://www.intel.com/technology/magazine/computing/it09021.pdf Thanks - Joe

1 0

[LinuxBIOS] [PATCH] [BUILDROM] add support for Tyan s2882
by Ward Vandewege 24 Oct '07

24 Oct '07

-- Ward Vandewege <ward(a)fsf.org> Free Software Foundation - Senior System Administrator

2 2

[LinuxBIOS] r48 - in buildrom-devel: config/platforms packages/kernel packages/kernel/conf packages/linuxbios packages/linuxbios/patches
by svn＠openbios.org 24 Oct '07

24 Oct '07

Author: ward Date: 2007-10-24 23:45:06 +0200 (Wed, 24 Oct 2007) New Revision: 48 Added: buildrom-devel/config/platforms/tyan-s2882.conf buildrom-devel/packages/kernel/conf/defconfig-tyan-s2882 buildrom-devel/packages/kernel/tyan-s2882-kernel.mk buildrom-devel/packages/linuxbios/patches/tyan-s2882-filo-Config.lb.patch buildrom-devel/packages/linuxbios/patches/tyan-s2882-kernel-and-lab-Config.lb.patch buildrom-devel/packages/linuxbios/tyan-s2882-linuxbios.mk Modified: buildrom-devel/config/platforms/Config.in buildrom-devel/config/platforms/platforms.conf Log: [BUILDROM] Add support for the Tyan s2882 platform Build a ROM for the Tyan s2882 platform supported in LinuxBIOSv2. Signed-off-by: Ward Vandewege <ward(a)gnu.org> Acked-by: Jordan Crouse <jordan.crouse(a)amd.com> Modified: buildrom-devel/config/platforms/Config.in =================================================================== --- buildrom-devel/config/platforms/Config.in 2007-10-24 14:59:05 UTC (rev 47) +++ buildrom-devel/config/platforms/Config.in 2007-10-24 21:45:06 UTC (rev 48) @@ -30,6 +30,10 @@ bool "Gigabyte M57SLI" select PLATFORM +config PLATFORM_TYAN_S2882 + bool "Tyan S2882" + select PLATFORM + config PLATFORM_TYAN_S2891 bool "Tyan S2891" select PLATFORM Modified: buildrom-devel/config/platforms/platforms.conf =================================================================== --- buildrom-devel/config/platforms/platforms.conf 2007-10-24 14:59:05 UTC (rev 47) +++ buildrom-devel/config/platforms/platforms.conf 2007-10-24 21:45:06 UTC (rev 48) @@ -12,6 +12,7 @@ PLATFORM-$(CONFIG_PLATFORM_DB800) = db800.conf PLATFORM-$(CONFIG_PLATFORM_DBE61) = dbe61.conf PLATFORM-$(CONFIG_PLATFORM_M57SLI) = m57sli.conf +PLATFORM-$(CONFIG_PLATFORM_TYAN_S2882) = tyan-s2882.conf PLATFORM-$(CONFIG_PLATFORM_TYAN_S2891) = tyan-s2891.conf PLATFORM-$(CONFIG_PLATFORM_SERENGETI_CHEETAH) = serengeti_cheetah.conf Added: buildrom-devel/config/platforms/tyan-s2882.conf =================================================================== --- buildrom-devel/config/platforms/tyan-s2882.conf (rev 0) +++ buildrom-devel/config/platforms/tyan-s2882.conf 2007-10-24 21:45:06 UTC (rev 48) @@ -0,0 +1,38 @@ +# Support for the Tyan S2882 board + +#### Platform configuration + +CC=gcc +STRIP=strip +AS=as + +TARGET_ARCH=i686 +CFLAGS_platform = -m32 + +# Targets + +KERNEL_MK=$(PACKAGE_DIR)/kernel/tyan-s2882-kernel.mk +LINUXBIOS_MK=$(PACKAGE_DIR)/linuxbios/tyan-s2882-linuxbios.mk + +# kernel configuration (for LAB) + +KERNEL_VERSION=2.6.22.2 +KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/tyan-s2882-defconfig +UCLIBC_ARCH=i386 + +# Etherboot configuration +ETHERBOOT_ARCH=i386 + +# LinuxBIOS configuration + +LINUXBIOS_VENDOR=tyan +LINUXBIOS_BOARD=s2882 +LINUXBIOS_CONFIG=Config.lb +LINUXBIOS_TDIR=s2882 +LINUXBIOS_TAG=2887 +LINUXBIOS_ROM_NAME=linuxbios.rom + +# FILO configuration + +FILO_CONFIG=tyan-s2882-Config + Added: buildrom-devel/packages/kernel/conf/defconfig-tyan-s2882 =================================================================== --- buildrom-devel/packages/kernel/conf/defconfig-tyan-s2882 (rev 0) +++ buildrom-devel/packages/kernel/conf/defconfig-tyan-s2882 2007-10-24 21:45:06 UTC (rev 48) @@ -0,0 +1,1225 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22.2 +# Wed Oct 24 14:00:48 2007 +# +CONFIG_X86_32=y +CONFIG_GENERIC_TIME=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_X86=y +CONFIG_MMU=y +CONFIG_ZONE_DMA=y +CONFIG_QUICKLIST=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_DMI=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="BuildROM L-A-B V1.0" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_SYSENTER is not set +# CONFIG_AIO is not set +# CONFIG_XATTR is not set +# CONFIG_FILE_LOCKING is not set +# CONFIG_ETHTOOL is not set +# CONFIG_INETPEER is not set +# CONFIG_NET_DEV_MULTICAST is not set +# CONFIG_MEASURE_INLINES is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK_FUNC=y +CONFIG_PRINTK=y +# CONFIG_BUG is not set +CONFIG_ELF_CORE=y +CONFIG_PANIC=y +CONFIG_FULL_PANIC=y +CONFIG_BASE_FULL=y +CONFIG_NET_SMALL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +# CONFIG_CRC32_TABLES is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLAB is not set +# CONFIG_SLUB is not set +CONFIG_SLOB=y +CONFIG_CC_FUNIT_AT_A_TIME=y +CONFIG_LINUXTINY_DO_UNINLINE=y +CONFIG_BINFMT_SCRIPT=y +CONFIG_MAX_SWAPFILES_SHIFT=0 +CONFIG_NR_LDISCS=2 +CONFIG_MAX_USER_RT_PRIO=5 +CONFIG_RT_MUTEXES=y +CONFIG_CRC32_CALC=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor type and features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_SMP is not set +CONFIG_X86_PC=y +# CONFIG_X86_ELAN is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_SUMMIT is not set +# CONFIG_X86_BIGSMP is not set +# CONFIG_X86_VISWS is not set +# CONFIG_X86_GENERICARCH is not set +# CONFIG_X86_ES7000 is not set +# CONFIG_PARAVIRT is not set +CONFIG_M386=y +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MCORE2 is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set +# CONFIG_X86_GENERIC is not set +CONFIG_X86_L1_CACHE_SHIFT=4 +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_X86_PPRO_FENCE=y +CONFIG_X86_F00F_BUG=y +CONFIG_X86_MINIMUM_CPU_MODEL=0 +CONFIG_HPET_TIMER=y +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_BKL=y +CONFIG_X86_UP_APIC=y +CONFIG_X86_UP_IOAPIC=y +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +# CONFIG_X86_MCE is not set +# CONFIG_VM86 is not set +# CONFIG_TOSHIBA is not set +# CONFIG_I8K is not set +# CONFIG_X86_REBOOTFIXUPS is not set +# CONFIG_MICROCODE is not set +# CONFIG_X86_MSR is not set +# CONFIG_X86_CPUID is not set + +# +# Firmware Drivers +# +# CONFIG_EDD is not set +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set +CONFIG_NOHIGHMEM=y +# CONFIG_HIGHMEM4G is not set +# CONFIG_HIGHMEM64G is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_3G_OPT is not set +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_2G_OPT is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_NR_QUICK=1 +# CONFIG_MATH_EMULATION is not set +# CONFIG_MTRR is not set +# CONFIG_SECCOMP is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_KEXEC=y +CONFIG_PHYSICAL_START=0x100000 +# CONFIG_RELOCATABLE is not set +CONFIG_PHYSICAL_ALIGN=0x100000 +CONFIG_COMPAT_VDSO=y + +# +# Power management options (ACPI, APM) +# +# CONFIG_PM is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +CONFIG_PCI=y +# CONFIG_PCI_GOBIOS is not set +# CONFIG_PCI_GOMMCONFIG is not set +# CONFIG_PCI_GODIRECT is not set +CONFIG_PCI_GOANY=y +CONFIG_PCI_BIOS=y +CONFIG_PCI_DIRECT=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_HT_IRQ=y +CONFIG_ISA_DMA_API=y +# CONFIG_ISA is not set +# CONFIG_MCA is not set +# CONFIG_SCx200 is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_IBM_ASM is not set +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +# CONFIG_BLK_DEV_HD_IDE is not set +# CONFIG_BLK_DEV_IDEDISK is not set +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +# CONFIG_IDE_PROC_FS is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_CMD640 is not set +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_IDEPCI_PCIBUS_ORDER=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_RZ1000 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_ATIIXP is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_CS5535 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CS5535 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=48 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_SONYPI is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_MWAVE is not set +# CONFIG_PC8736x_GPIO is not set +# CONFIG_NSC_GPIO is not set +# CONFIG_CS5535_GPIO is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +CONFIG_I2C_ALGOPCA=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +# CONFIG_VIDEO_SELECT is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# +# CONFIG_EDAC is not set + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Virtualization +# +# CONFIG_KVM is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_EARLY_PRINTK=y +CONFIG_X86_FIND_SMP_CONFIG=y +CONFIG_X86_MPPARSE=y +CONFIG_DOUBLEFAULT=y + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_586 is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_AES_586 is not set +CONFIG_CRYPTO_CAST5=y +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set + +# +# Hardware crypto devices +# +# CONFIG_CRYPTO_DEV_PADLOCK is not set +# CONFIG_CRYPTO_DEV_GEODE is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_KTIME_SCALAR=y Added: buildrom-devel/packages/kernel/tyan-s2882-kernel.mk =================================================================== --- buildrom-devel/packages/kernel/tyan-s2882-kernel.mk (rev 0) +++ buildrom-devel/packages/kernel/tyan-s2882-kernel.mk 2007-10-24 21:45:06 UTC (rev 48) @@ -0,0 +1,25 @@ +# Build file for the Tyan S2882 LAB kernel + +KERNEL_URL=http://kernel.org/pub/linux/kernel/v2.6/ +KERNEL_SOURCE=linux-$(KERNEL_VERSION).tar.bz2 +KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-tyan-s2882 + +TINY_URL=http://elinux.org/images/0/0e/ +TINY_SOURCE=Tiny-quilt-2.6.22.1-1.tar.gz +TINY_DIR=$(KERNEL_DIR)/tiny/patches + +KERNEL_PATCHES += $(TINY_DIR) + +$(SOURCE_DIR)/$(KERNEL_SOURCE): + @ mkdir -p $(SOURCE_DIR) + @ wget -P $(SOURCE_DIR) $(KERNEL_URL)/$(KERNEL_SOURCE) + +$(SOURCE_DIR)/$(TINY_SOURCE): + @ mkdir -p $(SOURCE_DIR) + @ wget -P $(SOURCE_DIR) $(TINY_URL)/$(TINY_SOURCE) + +include $(PACKAGE_DIR)/kernel/kernel.inc + +kernel: generic-kernel +kernel-clean: generic-kernel-clean +kernel-distclean: generic-kernel-distclean Added: buildrom-devel/packages/linuxbios/patches/tyan-s2882-filo-Config.lb.patch =================================================================== --- buildrom-devel/packages/linuxbios/patches/tyan-s2882-filo-Config.lb.patch (rev 0) +++ buildrom-devel/packages/linuxbios/patches/tyan-s2882-filo-Config.lb.patch 2007-10-24 21:45:06 UTC (rev 48) @@ -0,0 +1,56 @@ +Index: LinuxBIOSv2/targets/tyan/s2882/Config.lb +=================================================================== +--- LinuxBIOSv2/targets/tyan/s2882/Config.lb (revision 2867) ++++ LinuxBIOSv2/targets/tyan/s2882/Config.lb (working copy) +@@ -7,45 +7,21 @@ + + # Tyan s2882 + romimage "normal" +-# 48K for SCSI FW or ATI ROM +- option ROM_SIZE = 512*1024-48*1024 +-# 48K for SCSI FW and 48K for ATI ROM +-# option ROM_SIZE = 512*1024-48*1024-48*1024 +-# 64K for Etherboot +-# option ROM_SIZE = 512*1024-64*1024 ++ # 36K for ATI ROM in 1M ++ option ROM_SIZE = 1024*1024-36*1024 + option USE_FALLBACK_IMAGE=0 +-# option ROM_IMAGE_SIZE=0x11800 +-# option ROM_IMAGE_SIZE=0x16000 + option ROM_IMAGE_SIZE=0x20000 +- option XIP_ROM_SIZE=0x20000 ++ option XIP_ROM_SIZE=0x20000 + option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" +-# payload ../../../payloads/tg3--ide_disk.zelf +-# payload ../../../payloads/filo.elf +-# payload ../../../payloads/filo_mem.elf +-# payload ../../../payloads/filo.zelf +-# payload ../../../payloads/tg3--filo.zelf +-# payload ../../../payloads/e1000--filo.zelf +-# payload ../../../payloads/tg3--e1000--filo.zelf +- payload ../../../../payloads/tg3--filo_hda2_vga.zelf +-# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf ++ payload ../payload.elf + end + + romimage "fallback" + option USE_FALLBACK_IMAGE=1 +-# option ROM_IMAGE_SIZE=0x11800 +-# option ROM_IMAGE_SIZE=0x16000 + option ROM_IMAGE_SIZE=0x20000 +- option XIP_ROM_SIZE=0x20000 ++ option XIP_ROM_SIZE=0x20000 + option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback" +-# payload ../../../payloads/tg3--ide_disk.zelf +-# payload ../../../payloads/filo.elf +-# payload ../../../payloads/filo_mem.elf +-# payload ../../../payloads/filo.zelf +-# payload ../../../payloads/tg3--filo.zelf +-# payload ../../../payloads/e1000--filo.zelf +-# payload ../../../payloads/tg3--e1000--filo.zelf +- payload ../../../../payloads/tg3--filo_hda2_vga.zelf +-# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf ++ payload ../payload.elf + end + + buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" Added: buildrom-devel/packages/linuxbios/patches/tyan-s2882-kernel-and-lab-Config.lb.patch =================================================================== --- buildrom-devel/packages/linuxbios/patches/tyan-s2882-kernel-and-lab-Config.lb.patch (rev 0) +++ buildrom-devel/packages/linuxbios/patches/tyan-s2882-kernel-and-lab-Config.lb.patch 2007-10-24 21:45:06 UTC (rev 48) @@ -0,0 +1,62 @@ +Index: LinuxBIOSv2/targets/tyan/s2882/Config.lb +=================================================================== +--- LinuxBIOSv2/targets/tyan/s2882/Config.lb (revision 2867) ++++ LinuxBIOSv2/targets/tyan/s2882/Config.lb (working copy) +@@ -5,47 +5,19 @@ + target s2882 + mainboard tyan/s2882 + +-# Tyan s2882 +-romimage "normal" +-# 48K for SCSI FW or ATI ROM +- option ROM_SIZE = 512*1024-48*1024 +-# 48K for SCSI FW and 48K for ATI ROM +-# option ROM_SIZE = 512*1024-48*1024-48*1024 +-# 64K for Etherboot +-# option ROM_SIZE = 512*1024-64*1024 +- option USE_FALLBACK_IMAGE=0 +-# option ROM_IMAGE_SIZE=0x11800 +-# option ROM_IMAGE_SIZE=0x16000 +- option ROM_IMAGE_SIZE=0x20000 +- option XIP_ROM_SIZE=0x20000 +- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" +-# payload ../../../payloads/tg3--ide_disk.zelf +-# payload ../../../payloads/filo.elf +-# payload ../../../payloads/filo_mem.elf +-# payload ../../../payloads/filo.zelf +-# payload ../../../payloads/tg3--filo.zelf +-# payload ../../../payloads/e1000--filo.zelf +-# payload ../../../payloads/tg3--e1000--filo.zelf +- payload ../../../../payloads/tg3--filo_hda2_vga.zelf +-# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf +-end ++option ROM_SIZE=0x100000 ++# 36K for ATI ROM in 1M ++option FALLBACK_SIZE=(ROM_SIZE-0x9000) + ++# Tyan s2882 + romimage "fallback" + option USE_FALLBACK_IMAGE=1 +-# option ROM_IMAGE_SIZE=0x11800 +-# option ROM_IMAGE_SIZE=0x16000 +- option ROM_IMAGE_SIZE=0x20000 +- option XIP_ROM_SIZE=0x20000 ++ option CONFIG_COMPRESSED_PAYLOAD_LZMA=1 ++ option CONFIG_PRECOMPRESSED_PAYLOAD=1 ++ option ROM_IMAGE_SIZE=0x17000 ++ option XIP_ROM_SIZE=0x40000 + option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback" +-# payload ../../../payloads/tg3--ide_disk.zelf +-# payload ../../../payloads/filo.elf +-# payload ../../../payloads/filo_mem.elf +-# payload ../../../payloads/filo.zelf +-# payload ../../../payloads/tg3--filo.zelf +-# payload ../../../payloads/e1000--filo.zelf +-# payload ../../../payloads/tg3--e1000--filo.zelf +- payload ../../../../payloads/tg3--filo_hda2_vga.zelf +-# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf ++ payload ../payload.elf + end + +-buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" ++buildrom ./linuxbios.rom ROM_SIZE "fallback" Added: buildrom-devel/packages/linuxbios/tyan-s2882-linuxbios.mk =================================================================== --- buildrom-devel/packages/linuxbios/tyan-s2882-linuxbios.mk (rev 0) +++ buildrom-devel/packages/linuxbios/tyan-s2882-linuxbios.mk 2007-10-24 21:45:06 UTC (rev 48) @@ -0,0 +1,44 @@ +# This is the Generic LinuxBIOS target + +ifeq ($(CONFIG_PLATFORM),y) +ifeq ($(LINUXBIOS_TAG),) +$(error You need to specify a version to pull in your platform config) +endif +endif + +LINUXBIOS_PATCHES = + +ifeq ($(CONFIG_PAYLOAD_FILO),y) + LINUXBIOS_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2882-filo-Config.lb.patch +endif + +ifeq ($(CONFIG_PAYLOAD_KERNEL),y) + LINUXBIOS_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2882-kernel-and-lab-Config.lb.patch +endif + +ifeq ($(CONFIG_PAYLOAD_LAB),y) + LINUXBIOS_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2882-kernel-and-lab-Config.lb.patch +endif + + +LINUXBIOS_BASE_DIR=svn +LINUXBIOS_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 +LINUXBIOS_TARBALL=linuxbios-svn-$(LINUXBIOS_TAG).tar.gz +LINUXBIOS_PAYLOAD_TARGET=$(LINUXBIOS_BUILD_DIR)/payload.elf +TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom + +include $(PACKAGE_DIR)/linuxbios/linuxbios.inc + +$(SOURCE_DIR)/$(LINUXBIOS_TARBALL): + @ echo "Fetching the LinuxBIOS code..." + @ mkdir -p $(SOURCE_DIR)/linuxbios + @ $(BIN_DIR)/fetchsvn.sh $(LINUXBIOS_URL) $(SOURCE_DIR)/linuxbios \ + $(LINUXBIOS_TAG) $(SOURCE_DIR)/$(LINUXBIOS_TARBALL) \ + > $(LINUXBIOS_FETCH_LOG) 2>&1 + +$(OUTPUT_DIR)/$(TARGET_ROM): $(LINUXBIOS_OUTPUT) + @ cat $(LINUXBIOS_OUTPUT) > $@ + +linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM) +linuxbios-clean: generic-linuxbios-clean +linuxbios-distclean: generic-linuxbios-distclean

1 0

[LinuxBIOS] r2896 build service
by LinuxBIOS information 24 Oct '07

24 Oct '07

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "uwe" checked in revision 2896 to the LinuxBIOS source repository and caused the following changes: Change Log: Some fixes for the BCOM WinNET100, mostly in Config.lb: - Add missing entry for the NIC: device pci 0f.0 on end # Ethernet (onboard) - Drop the following lines: register "com1" = "{115200}" register "com2" = "{38400}" Those entries hardcode the BAUD rate (as far as I can tell, please correct me if I'm wrong). We don't want that -- instead the config option TTYS0_BAUD in Options.lb should be used(?) I verified that dropping those lines will not break serial output (COM1, 115200, 8n1). - Enable IDE (PCI device 00:12.2) and add the following register lines to tell the CS5530 code to actually enable IDE channel 0: register "ide0_enable" = "1" register "ide1_enable" = "0" # Not available/needed on this board Tested with a 2.5" hard drive and FILO, works fine. - Enable USB (PCI device 00:13.0), not sure why it was commented. - Enable COM2 as it's used by the smartcard reader. - Add CONFIG_COMPRESSED_PAYLOAD_LZMA to Options.lb, in order to fix abuild for this board. - Add some more comments. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=hdama&vendor=… Configuration of bcom:winnet100 has been fixed Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=e325&vendor=i… Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=e326&vendor=i… Compilation of iei:juki-511p is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=juki-511p&ven… Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=dk8s2&vendor=… Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=dk8x&vendor=i… Compilation of newisys:khepri is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=khepri&vendor… If something broke during this checkin please be a pain in uwe's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system

1 0

[LinuxBIOS] [PATCH] BCOM WinNET100 improvements
by Uwe Hermann 24 Oct '07

24 Oct '07

See patch. Btw, do we need to (or want to) enable the "SMI" PCI device? I guess not as we don't use the VSA(?) Do we need it for the VSA-less audio driver? Btw, Juergen, can you please attach a license to your photos in the wiki? GPL or CC or public domain, whatever. There are templates such as {{GPL}} or {{PD-self}} etc. This patch should also fix the broken abuild-run on this board... Thanks, Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org

4 7

[LinuxBIOS] r2896 - trunk/LinuxBIOSv2/src/mainboard/bcom/winnet100
by svn＠openbios.org 24 Oct '07

24 Oct '07

Author: uwe Date: 2007-10-24 22:17:04 +0200 (Wed, 24 Oct 2007) New Revision: 2896 Modified: trunk/LinuxBIOSv2/src/mainboard/bcom/winnet100/Config.lb trunk/LinuxBIOSv2/src/mainboard/bcom/winnet100/Options.lb Log: Some fixes for the BCOM WinNET100, mostly in Config.lb: - Add missing entry for the NIC: device pci 0f.0 on end # Ethernet (onboard) - Drop the following lines: register "com1" = "{115200}" register "com2" = "{38400}" Those entries hardcode the BAUD rate (as far as I can tell, please correct me if I'm wrong). We don't want that -- instead the config option TTYS0_BAUD in Options.lb should be used(?) I verified that dropping those lines will not break serial output (COM1, 115200, 8n1). - Enable IDE (PCI device 00:12.2) and add the following register lines to tell the CS5530 code to actually enable IDE channel 0: register "ide0_enable" = "1" register "ide1_enable" = "0" # Not available/needed on this board Tested with a 2.5" hard drive and FILO, works fine. - Enable USB (PCI device 00:13.0), not sure why it was commented. - Enable COM2 as it's used by the smartcard reader. - Add CONFIG_COMPRESSED_PAYLOAD_LZMA to Options.lb, in order to fix abuild for this board. - Add some more comments. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/LinuxBIOSv2/src/mainboard/bcom/winnet100/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/bcom/winnet100/Config.lb 2007-10-24 14:42:12 UTC (rev 2895) +++ trunk/LinuxBIOSv2/src/mainboard/bcom/winnet100/Config.lb 2007-10-24 20:17:04 UTC (rev 2896) @@ -79,55 +79,59 @@ dir /pc80 config chip.h -chip northbridge/amd/gx1 - device pci_domain 0 on - device pci 0.0 on end - chip southbridge/amd/cs5530 - device pci 12.0 on - chip superio/nsc/pc97317 - device pnp 2e.0 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.1 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.2 on # RTC - io 0x60 = 0x70 - irq 0x70 = 8 - end - device pnp 2e.3 off # Floppy - end - device pnp 2e.4 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.5 off # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.6 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.7 on # GPIO - io 0x60 = 0xe0 - end - device pnp 2e.8 on # Power management - io 0x60 = 0xe800 - end - register "com1" = "{115200}" - register "com2" = "{38400}" +chip northbridge/amd/gx1 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + chip southbridge/amd/cs5530 # Southbridge + device pci 0f.0 on end # Ethernet (onboard) + device pci 12.0 on # ISA bridge + chip superio/nsc/pc97317 # Super I/O + device pnp 2e.0 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 end - device pci 12.1 off end # SMI - device pci 12.2 off end # IDE - device pci 12.3 on end # Audio - device pci 12.4 on end # VGA - # device pci 13.0 on end # USB + device pnp 2e.1 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.2 on # RTC, Advanced power control (APC) + io 0x60 = 0x70 + irq 0x70 = 8 + end + device pnp 2e.3 off # Floppy (N/A on this board) + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.4 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.5 on # COM2 (used for smartcard reader) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.6 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.7 on # GPIO + io 0x60 = 0xe0 + end + device pnp 2e.8 on # Power management + io 0x60 = 0xe8 + end + end end + device pci 12.1 off end # SMI + device pci 12.2 on end # IDE + device pci 12.3 on end # Audio + device pci 12.4 on end # VGA (onboard) + device pci 13.0 on end # USB + register "ide0_enable" = "1" + register "ide1_enable" = "0" # Not available/needed on this board end end - chip cpu/amd/model_gx1 + chip cpu/amd/model_gx1 # CPU end end Modified: trunk/LinuxBIOSv2/src/mainboard/bcom/winnet100/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/bcom/winnet100/Options.lb 2007-10-24 14:42:12 UTC (rev 2895) +++ trunk/LinuxBIOSv2/src/mainboard/bcom/winnet100/Options.lb 2007-10-24 20:17:04 UTC (rev 2896) @@ -56,6 +56,7 @@ uses TTYS0_BAUD uses TTYS0_BASE uses TTYS0_LCS +uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses CONFIG_VIDEO_MB

1 0

← Newer
1
...
11
12
13
14
15
16
17
...
49
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot October 2007