From: Lu, Yinghai
>To my understanding, you don't need to waiting for Eric's code.
>You can use the cable on two systems without debug port support.
>So just extend the program to make it can write the data too.
Anyone is working on creating one usb_serial_driver for USB debug device
using host debug port?
sorry for confusion I've tested flashing again - this time with original BIOS
chip (SST49LF004A/B) and I was able to write without problems.
>On Wednesday 29 November 2006 15:22, Ward Vandewege wrote:
> Hi Philipp,
> Out of curiosity, have you managed in-board flashing with flashrom?
> We have a couple of A8N-VM CSM boards, and while reading data with flashrom
> works, writing doesn't yet.
> On Wed, Nov 29, 2006 at 01:51:27PM +0100, Philipp Degler wrote:
> > Hi,
> > we've tested the it8712f code, too. We see serial output on our ASUS
> > a8ne. It is equiped with a ck804 SB and 1GB of RAM and a Athlon64 CPU.
From: ebiederman(a)lnxi.com [mailto:email@example.com]
>I'm looking at earlyprintk. That looks like the most interesting case.
>once something is bootstrapped it should be relatively straight forward
>to make the other cases work.
Me too. Simnow console is there!
With USB serial console enabled in kernel and console=ttyUSB0, only can
get boot message very late.
>From usbcore: registered new interface driver ftdi_sio. Before that only
some lines in buffer.